• Journal of the Korean Geotechnical Society
• /
• v.30 no.1
• /
• pp.49-63
• /
• 2014

Bearing capacity factor $N_{\gamma}$ and shape factor were studied for rigid strip and circular footings with a rough base on sand by numerical modelling considering the effect of dilation angle. The numerical model was developed with an explicit finite difference code. Loading procedures and interpretation methods were devised in order to shorten the running time while eliminating the exaggeration of the reaction caused by the explicit scheme. Using the Mohr-Coulomb plasticity model with associated (${\psi}={\phi}$) and nonassociated (${\psi}$ < ${\phi}$) flow-rules, the bearing capacity factor $N_{\gamma}$ was evaluated for various combinations of internal friction angles and dilation angles. Bearing capacity factor decreased as the dilation angle was reduced from the associated condition. An equation applicable to typical sands was proposed to evaluate the relative bearing capacity for the nonassociated condition compared to the associated condition on which most bearing capacity factor equations are based. The shape factor for the circular footing varied substantially when the plane-strain effect was taken into account for the strip footing. The numerical results of this study showed closer trends with the previous experimental results when the internal friction angle was increased for the strip footing. Discussions are made on the reason that previous equations for the shape factor give different results and recommendations are made for the appropriate design shape factor.

• Culinary science and hospitality research
• /
• v.24 no.3
• /
• pp.60-70
• /
• 2018

Rapid economic growth brought material affluence and convenience, but it also has caused a negative issue, such as environmental damage. Therefore, this research holds the purpose of grasping structural influencing relationship of environmental awareness of cook, which is taking an important role in food safety among workers in hotel restaurants with eco-friendly attitude and food safety pursuit behavior. To achieve the purpose, collected materials were tested for the fidelity, organic causation and control effect, using Structural Equation Modeling for frequency analysis, confirmatory factor analysis, credibility analysis and hypothesis testing with SPSS (V23.0) and AMOS (V21.0) programs. Environmental awareness of hotel cook has causation with eco-friendly attitude, and the attitude has meaningful causation with food safety pursuit behavior. That is, it proved that cooks are taking care of their job carefully from the pre-cooking stage while most of people ignore the storing stage. The result shows not only hotel's own training session, cook's level of consciousness on the food safety and they are working with high sense of responsibility. The limitation of this research is that it only conducted with cooks of deluxe hotels in Busan, and it could not include various variables about environmental awareness. Therefore, it is expected that the lacking contents to be dealt by a follow-up study.

• Journal of Distribution Science
• /
• v.15 no.5
• /
• pp.17-28
• /
• 2017

Purpose - Considering the environmental issues in corporate management is now a necessity, not an option. In addition, consumers' interest in health and environment has increased rapidly. This study aims to investigate how the management style that pursues environmental protection affects the various outcomes at each management process such as planning, producing and supervising process. Research design, data, and methodology - We surveyed 319 manufacturing companies from April 1 to April 30, 2016. Green purchasing, environmental technology management and management support are selected as independent variables and firm performances as dependent variables. Three analyses including factor, regression and moderating were conducted. Results - Regression analysis was performed to set up hypotheses. Consequently, the total six hypotheses were adopted and then innovative management style showed moderating effect. Conclusions - Companies should consider environmental factors to improve the financial performance in the long term. Especially the cooperative style enhances financial performance by implementing eco-friendly design in cooperation with customers. Also, eco-friendly activities with suppliers could have direct environmental protection effects. Therefore, a manufacturer needs to cooperate with both suppliers and customers to maximize the protection effect. The production of eco-friendly products and implementing eco-friendly design with customers positively affect product quality.

• Journal of Environmental Impact Assessment
• /
• v.21 no.3
• /
• pp.381-389
• /
• 2012

This study was conducted to analyze the weight factors for siting the electric facilities using Analytic Heirarchy Process technique participating the stakeholders. Siting the electric facilities has been a dispute of long standing because of landscape damage, geological deformation and various environmental problems such as electromagnetic effect to human health. For analyzing the weight factors by AHP technique, the questionnaire process was applied to the fifteen committee members including representatives of resident, academic experts, members of local assembly, officers of local government, journalists, etc. in Gangwondo, Korea. Weight factors for siting the electric facilities by AHP committee members resulted in residential areas 35.06%, cultural assets 16.68%, landscape conservation 13.11%, large-scale ecological corridor 10.17%, connectability of electric transmission line 8.32% respectively. The distance from residential areas was the most important factor preferred by committee members for siting the electric facilities.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.03a
• /
• pp.1113-1124
• /
• 2009

The limit equilibrium method and finite element method have been commonly used to assess the stability of anchored slope. However, the existing limit equilibrium methods do not consider the load transfer of anchor and, if the potential failure surface crosses the bonded zone of anchors, the anchor loads are not included in computing the factor of safety. In this paper, simplified bishop method, one among several methods based on the limit equilibrium is used to develope the Excel Sheet program and the working load of anchor along the failure surface is calculated by Flamant's formula, proposed by Morlier and Tenier(1982). Additionally, the finite element analysis of anchored slope considering the load transfer is performed in order to compare with the result from the limit equilibrium analysis and analyze the reinforced effect of anchor. From this study, new modelling method that limits the reinforcing range and considers the load transfer is proposed and Excel Sheet program is developed. The factor of safety for several cases between PC STABL and Excel Sheet program is also compared for verification of the program.

• Geomechanics and Engineering
• /
• v.18 no.6
• /
• pp.575-584
• /
• 2019

The groundwater level (GWL) is an important subsoil condition for the design of foundation. GWL tends to fluctuate often with seasonal variation, which may cause unexpected, additional settlements with some reductions in the safety margin of foundation. In this study, the effects of fluctuating GWL on the load carrying and settlement behavior of footing were investigated and quantified. A series of model load tests were conducted for various GWL and soil conditions using a hydraulically-controlled chamber system. Changes in load level and rising and falling GWL fluctuation cycle were considered in the tests. Settlements during GWL rise were greater than those during GWL fall. The depth of the GWL influence zone ($\underline{d}_{w,inf}$) varied in the range of 0.3 to 1.5 times footing width and became shallower as GWL continued to fluctuate. Design equations for estimating GWL-induced settlements for footings were proposed. The GWL fluctuation cycle, load level and soil density were considered in the proposed method. Changes in settlement and factor of safety with GWL fluctuation were discussed.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.2
• /
• pp.329-338
• /
• 2021

The mobile payment system has not only changed the payment pattern but also has improved the performance of small and medium-sized enterprises (SMEs) and individuals' quality of life by saving their energy, reducing the risk of taking cash, and enabling them to give more time to businesses and do international business. Besides, with the current advancement in the Internet as well as the digital transformation, SMEs are being forced to adopt mobile payment systems (MPS). The purpose of this study is to investigate the effects of technological-organizational-environmental (TOE) determinants on the adoption of MPS and its impact on SMEs' firm performance operating in Ghana. This research employed a closed-ended questionnaire to collect data from January 2020 - April 2020. This study used a structural equation modeling (SEM) approach using SmartPLS 3.0 for path analysis of 145 responses. The findings of the study include the statistically significant effects of technological (relative advantage and compatibility), organizational (top management support and employees' readiness), and environmental (social influence and competitive pressure) factors on the adoption of MPS. Furthermore, this study also proved the positive and statistically significant effect of MPS on SMEs' performance. This study demonstrated that the TOE factor explains 70% variations in the adoption of MPS.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.39 no.2
• /
• pp.257-270
• /
• 2015

This study investigates the effect of perceived value on attitude and purchase intention of upcycling fashion goods. The study also examines the effect of perceived value on attitudes according to fashion innovativeness. The qualitative data analysis results from NVivo 10.0 showed that consumers paid attention to the creative design value, environmental value, scarcity value of upcycling fashion goods. Next, 201 effective questionnaires were analyzed using SPSS 22.0 and AMOS 20.0. The results are as follows. First, there were 5 factor solutions for the perceived value of up-cycling fashion goods: environmental value, creative design value, functional value, emotional value, and self-expression value. Second, environmental value, functional value, and self-expression value positively affected attitude; however, creative design value and emotional value did not affect attitude. Third, attitude positively influenced purchase intention of upcycling fashion goods. Fourth, there was a significant difference in the magnitude of the effect of self-expression value on attitude according to fashion innovativeness. The results of this study provide useful information for marketers or managers interested in upcycling fashion goods.

• Proceedings of the Korean Society of Toxicology Conference
• /
• 2005.05a
• /
• pp.85-90
• /
• 2005

Diesel exhaust Particles (DEPs) are known to induce allergic responses in airway epithelial cells, such as the production of various cytokines via nuclear factor-kappa B ($NF-{\kappa}B$). However. the intracellular signal transduction pathways underlying this phenomenon have not been fully examined. This study showed that DEP induced $NF-{\kappa}B$ activity via transforming growth factor-${\beta}$ activated kinase 1 (TAK1) and $NF-{\kappa}B$-inducing kinase (NIK) in L2 rat lung epithelial cells. DEP induced the $NF-{\kappa}B$ dependent reporter activity approximately two-to three-fold in L2 cells. However, this effect was abolished by the expression of the dominant negative forms of TAK1 or NIK. Furthermore, it was shown that DEP induced TAK1 phosphorylation in the L2 cells. These results suggest that TAK1 and NIK are important mediators of DEP-induced $NF-{\kappa}B$ activation.

• Journal of Environmental Science International
• /
• v.3 no.1
• /
• pp.17-29
• /
• 1994

An one dimensional atmosphere-vegetation interaction model is developed to discuss of the effect of vegetation on heat flux in mesoscale planetary boundary layer. The canopy model was a coupled system of three balance equations of energy, moisture at ground surface and energy state of canopy with three independent variables of $T_f$(foliage temperature), $T_g$(ground temperature) and $q_g$(ground specific humidity). The model was verified by comparative study with OSUID(Oregon State University One Dimensional Model) proved in HYPEX-MOBHLY experiment. As the result, both vegetation and soil characteristics can be emphasized as an important factor iii the analysis of heat flux in the boundary layer. From the numerical experiments, following heat flux characteristics are clearly founded simulation. The larger shielding factor(vegetation) increase of $T_f$ while decrease $T_g$. because vegetation cut solar radiation to ground. Vegetation, the increase of roughness and resistance, increase of sensible heat flux in foliage while decrease the latent heat flux in the foliage.