• Agricultural and Biosystems Engineering
• /
• 제1권2호
• /
• pp.73-80
• /
• 2000

Aerodynamics in a naturally ventilated multi-span greenhouse with plants was analyzed numerically by the computational fluid dynamics (CFD) simulation. To investigate the potential application of CFD techniques to greenhouse design and analysis, the numerical results of the CFD model were compared with the results of a steady-state mass and energy balance numerical model. Assuming the results of the mass and energy balance model as the standard, reasonably good agreement was obtained between the natural ventilation rates computed by the CFD numerical model and the mass and energy balance model. The steady-state CFD model during a sunny day showed negative errors as high as 15% in the morning and comparable positive errors in the afternoon. Such errors assumed to be due to heat storage in the floor, benches, and greenhouse structure. For a west wind of 2.5 m s$^{-1}$ , the internal nonporous shading screens that opened to the east were predicted to have a 15.6% better air exchange rate than opened to the west. It was generally predicted that the presence of nonporous internal shading screens significantly reduced natural ventilation if the horizontal opening of the screen for each span was smaller that the effective roof vent opening.

• 환경생물
• /
• 제20권4호
• /
• pp.312-315
• /
• 2002

Impact of artificial illumination on zooplankton dynamics has been studied in Tongyong marine ranch during the period from August 1998 to August 1999. Monthly sampling has been carried out to collect zooplankters from both natural waters and artificially illuminated waters at night. A total of 48 taxa of zooplankton occurred during the study. Copepods showed the prosperity in species number with 21 species. Every sample from illuminated waters consisted of move than 15 species except February while less than 15 species in samples from natural waters during the winter. Benthic amphipods occurred abundantly in illuminated waters. Zooplankton abundance was revealed to be increased in illuminated waters mainly due to the gathering of amphipods (4,500 indiv. $m^{-3})$ in September and October. Twenty times of zooplankton abundance was recorded in illuminated waters when compared with that in natural ones in September due to the gathering: of amphipods and ten times by the explosion of N. scintillans in August 1999. However, no distinct difference in the abundance was observed between two waters in the winter. Zooplankton gathering with artificial illumination seemed to be effective in amphipods, while copepods were hardly affected by the artificial illumination at night.

• 한국환경과학회지
• /
• 제8권6호
• /
• pp.661-667
• /
• 1999

Estimating dimensions of attractors are the most basic tools to analyze properties of chaotical dynamic systems. In this paper, we estimate correlation dimensions of meteorological variables, such as wind speed (v) and temperature (T) observed in Kimhae International Airport when the land-sea breeze circulation is appeared and find low non-integer values that reflect the deterministic chaos characterizing the dynamics. We compare the results with the correlation dimensions of 2-dimensional model that is calculated by finite element method. Though the correlation dimensions of the calculated wind speed ( v) are less than those of the observed wind speed ( v), we can suggest that the land-sea breeze circulation has not a unique mechanism. The land-sea breeze phenomenon is a complicated dynamics, which is constructed with various scale motions of atmosphere. In further research, we hope to find more accurate dynamics of land-sea breeze through wide observations and using of more sophisticated prediction models.

• Smart Structures and Systems
• /
• 제13권2호
• /
• pp.305-318
• /
• 2014

This paper numerically investigates the feasibility of an active mass damper (AMD) system using the time delay control (TDC) algorithm, which is one of the robust and adaptive control algorithms, for effectively suppressing the excessive vibration of a building structure under wind loading. Because of its several attractive features such as the simplicity and the excellent robustness to unknown system dynamics and disturbance, the TDC algorithm has the potential to be an effective control system for mitigating the vibration of civil engineering structures such as buildings and bridges. However, it has not been used for structural response reduction yet. In this study, therefore, the active control method combining an AMD system with the TDC algorithm is first proposed in order to reduce the wind-induced vibration of a building structure and its effectiveness is numerically examined. To this end, its stability analysis is first performed; and then, a series of numerical simulations are conducted. It is demonstrated that the proposed active structural control system can effectively reduce the acceleration response of the building structure.

• 한국환경생물학회:학술대회논문집
• /
• 한국환경생물학회 2004년도 학술대회
• /
• pp.50-50
• /
• 2004

• 한국미생물·생명공학회지
• /
• 제48권1호
• /
• pp.72-78
• /
• 2020

The dynamics of nitrogen compounds and RNA-based functional genes were characterized in the nitrification-denitrification coupling process. For the removal of residual ammonium, intermittent aeration was introduced in the denitrification reactor. N₂O production was not observed in both reactors. In both reactors, the nitrifying genes (achaeal-amoA, bacterial-amoA and hor) and denitrifying genes (narG, nirK, norB and nosZ) had a copy number of 3.92 × 10²-7.25 × 10⁵ and 2.85 × 10²-3.06 × 10⁴ per ng of DNA, respectively. These results suggest that denitrification and nitrification reactions occur in both the nitrification and denitrification reactors, respectively. Therefore, the coupling process is a promising one for the conversion of ammonium to nitrogen without generating N₂O.

• Interaction and multiscale mechanics
• /
• 제4권3호
• /
• pp.173-185
• /
• 2011

A multiscale modeling scheme that addresses the influence of the nanoparticle size in nanocomposites consisting of nano-sized spherical particles embedded in a polymer matrix is presented. A micromechanics-based constitutive model for nanoparticle-reinforced polymer composites is derived by incorporating the Eshelby tensor considering the interface effects (Duan et al. 2005a) into the ensemble-volume average method (Ju and Chen 1994). A numerical investigation is carried out to validate the proposed micromechanics-based constitutive model, and a parametric study on the interface moduli is conducted to investigate the effect of interface moduli on the overall behavior of the composites. In addition, molecular dynamics (MD) simulations are performed to determine the mechanical properties of the nanoparticles and polymer. Finally, the overall elastic moduli of the nanoparticle-reinforced polymer composites are estimated using the proposed multiscale approach combining the ensemble-volume average method and the MD simulation. The predictive capability of the proposed multiscale approach has been demonstrated through the multiscale numerical simulations.

• 한국산업보건학회지
• /
• 제10권2호
• /
• pp.140-149
• /
• 2000

In industrial field, there are several operations where a horizontal unidirectional airflow is used to control airborne contaminants. When a worker is immersed in a uniform freestream, a recirculating airflow can be created downstream of the worker by the phenomenon of boundary layer seperation. If the contaminant source and the breathing zone are within this near-wake region, high exposure may occur. The investigation for the effect of contaminant source location on worker exposure was performed by using CFD(Computational Fluid Dynamics). The airflow field was numerically calculated by assuming a steady flow and using the standard $k-{\varepsilon}$ turbulence model. As the results were compared with experimental data, the applicability of CFD was successfully verified. Subsequently, the breathing zone concentrations of the worker were predicted and compared with experimental data. The effects of contaminant density and turbulence intensity of freestream on worker exposure were evaluated.

• 한국시스템다이내믹스연구
• /
• 제1권1호
• /
• pp.159-183
• /
• 2000

How to protect the environment without sacrificing the human environment and economy at the level of region is on of the most difficult issues of recent times. The dynamic Interactions between economic activities and environmental pollution control activities determine whether social welfare is increased of decreased by such activities and provides a basis for saying whether they help or hurt the economy. Bureaucratic Approach of Local government has failed, and an Impetus has arisen to develop new tools of analysis, useful for finding policy leverages focused on sustainability. This paper focus on understanding dynamic relationships between regional economic system and environmental system, and presenting possible framework for finding policy leverages in dynamic interaction behaviors. The case, selected in this study, is Nacdong river regions case, which is related many meaningful issues about sustainable development： two big metropolitan government and dwellers have different opinion with regard to construction of large scale Industrial pack, drinking water supply, and environment model consisting of three sectors： regional economy sector, river pollution and drinking water sector, environmental protection and investment policy sector Finally, this paper deal with how to link policy leverage to causal loop structure for the sustainable development of two regions.

• 한국환경과학회지
• /
• 제30권12호
• /
• pp.983-991
• /
• 2021

The role of the distribution basin role is to apportion incoming raw water to the primary sedimentation basin as part of the water treatment process. The purpose of this study was to calculate the amount of water in the distribution basin using computational fluid dynamics (CFD) analysis and to find a way to improve any non-uniformity. We used the Taguchi method and the minitab tool as optimization methods. The results of the CFD calculation showed that the distribution flow had a deviation of 5% at the minimum inflow, 10% at the average inflow, and 22% at the maximum inflow. At maximum flow, the appropriate heights of the 7 weirs(C, D, A, B, E, F, G) were 40 mm, 20 mm, 20 mm, 0, 0, 0, and 20 mm, respectively, according to the Taguchi optimization tool. Here, the maximum deviation of the distribution amount was 9% and the standard deviation was 23.7. The appropriate heights of the 7 weirs, according to the Minitab tool, were 40 mm, 20 mm, 20 mm, 0, 0, 0, and 20 mm, respectively, for weirs C, D, A, B, E, F, and G. Therefore, the maximum deviation of the distribution amount was 8% and the standard deviation was 17.1, which was slightly improved compared to the Taguchi method.