• 제목/요약/키워드: Environmental Constraint

검색결과 171건 처리시간 0.022초

시장분배모형을 이용한 건물부문 에너지 시스템 환경성능평가 (Evaluation of Environmental Performance of Energy Systems employing Market Allocation Model in Building Sector in Korea)

  • 박동소
    • KIEAE Journal
    • /
    • 제2권4호
    • /
    • pp.65-72
    • /
    • 2002
  • In this study, the evaluation of environmental performance of the building energy system of domestic commercial sector was carried out. Based on the theory of linear programming model, we established an evaluation model satisfying object functions and constraint conditions. Employing the model, the evaluation of building energy system was performed under the consideration of cost and environmental constraint conditions. As an evaluation tool, MARKAL (MARKet Allocation) known as a market distribution model was employed. We analyzed scenarios of Case I (Base Scenarios) through Case IX established by the combination of the components of building energy system such as glazing, building skin, core, and heat source system. According to the results of the evaluation, highest contribution on the useful energy demand was obtained from the building energy system combined with solar heat source system, when the total amounts of $CO_2$ exhaust as an environmental constraint condition is assumed to be the level of 1995.

환경규제와 기술제약 -한국지역제조업을 중심으로- (Environmental Regulation and Technological Constraint)

  • 강상목;김은순
    • 자원ㆍ환경경제연구
    • /
    • 제11권3호
    • /
    • pp.345-375
    • /
    • 2002
  • The purpose of this paper is to measure the change of the production efficiency which may happen when environmental regulation incurs technological constraint in the process of production, and to compute the opportunity cost of pollution reduction with the lost products based on the change of efficiency. The patterns of production technoloy in the paper are divided into the technologies of strong disposability and weak disposabilty to grasp the effect of the technological constraint due to the environmental regulation. The endowment of the technolgical constraints in the process of production is considered to bring the greatest restriction on firm's production. When the environmental efficiencies of Korean regional manufactures were measured with linear programming model, the lost products related with the constraint of production technology that environmental regulation incurred, was average 148.1 billion dollar per year(5.87% of one year overall products) for total manufactures in 1991~1998. The ratio of the lost products for total products was spread from 0.78% to 1l.08%. The average lost products of 15 regions were changed from 4.66% to 18.35% of total products. Generally the environmental efficiency index of regional manufactures being decreased continuously since 1991, it is estimated that the environmental performance of Korean manufactures has been more and more deteriorating.

  • PDF

제약조건 처리기법에 따른 하모니써치 알고리즘의 효율성 평가 : 관로 최소비용설계 문제의 적용 (Efficiency Evaluation of Harmony Search Algorithm according to Constraint Handling Techniques : Application to Optimal Pipe Size Design Problem)

  • 유도근;이호민;이의훈;김중훈
    • 한국산학기술학회논문지
    • /
    • 제16권7호
    • /
    • pp.4999-5008
    • /
    • 2015
  • 제약조건이 있는 공학 최적화 문제에서 보다 좋은 결과를 얻기 위해서는 효율적인 제약조건 처리기법의 적용은 필수적이다. 본 연구에서는 네 가지의 제약조건 처리기법을 적용하여 메타휴리스틱 최적화 기법으로 널리 사용되고 있는 Harmony Search 알고리즘의 최적화 효율성을 평가하였다. 평가를 위해 대표적인 이산형 최적화 문제 중 하나인 상수관로 최소비용설계 문제를 적용하였다. 적용결과 전통적인 제약조건 처리방법으로 사용되던 벌칙함수에 비해 제안된 제약조건 처리기법의 결과가 효율적임을 확인하였다. 특히, ${\varepsilon}$-Constrained Method의 경우 기존방법에 비하여 효율적이고 안정적인 결과를 도출하였다. 제안된 방법은 새로운 최적화 알고리즘의 개발 필요 없이 HS의 성능을 증가시킬 수 있다는 점에서 의의가 있다고 판단된다. 또한 400개 이상의 결정변수를 가지는 대규모 문제의 적용을 통하여, 제안된 방법이 대규모 공학 최적화 문제에서도 활용이 가능함을 확인하였다.

기계적 매니퓰 레이터의 시변 물체 회피에서의 제약조건인식 (constraints Identification in Time-varying Obstacle Avoidance for Mechanical Manipulators)

  • 이범희;고명삼;하인중
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1987년도 전기.전자공학 학술대회 논문집(I)
    • /
    • pp.230-233
    • /
    • 1987
  • This paper addresses the identification of various constraints in time-varying obstacle avoidance for mechanical manipulators. The manipulator constraints include the smoothness constraint and torque constraint, while the environmental constraints include a motion priority, a traveling time constraint, a path constraint, and a collision constraint. The inherent difficulties in combining these constraints are discussed with a suggestion for the purpose of time-varying obstacle avoidance.

  • PDF

Thermal Stress Simulation of Mass Concrete Using Thermal Stress Device

  • 무하마드나시르;김진근
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2006년도 춘계학술발표회 논문집(I)
    • /
    • pp.474-477
    • /
    • 2006
  • To predict thermal stress independent of uncertain material properties of early age concrete, such as elastic modulus and creep, thermal stress device is used. In order to verify the application of various degree of constraint in the thermal stress device, a series of experiments were performed on mass concrete followed by numerical simulation. The application of various degrees of constraint can be achieved by using constraint frame material with different thermal expansion coefficient, length, and cross sectional area. Temperature development in the real structure has been simulated using temperature and humidity control chamber. The results from experiments and numerical analysis show that the thermal stresses estimated from simulation agree well with the general stress variations in the real structure even though the properties of concrete are uncertain.

  • PDF

Effect of constraint severity in optimal design of groundwater remediation

  • Ko, Nak-Youl;Lee, Kang-Kun
    • 한국지하수토양환경학회:학술대회논문집
    • /
    • 한국지하수토양환경학회 2003년도 추계학술발표회
    • /
    • pp.217-221
    • /
    • 2003
  • Variation of decision variables for optimal remediation using the pump-and-treat method is examined to estimate the effect of the degree of concentration constraint. Simulation-optimization method using genetic algorithm is applied to minimize the total pumping volume. In total volume minimization strategy, the remediation time increases rapidly prior to significant increase in pumping rates. When the concentration constraint is set severer, the more wells are required and the well on the down-gradient direction from the plume hot-spot gives more efficient remediation performance than that on the hot-spot position. These results show that the more profitable strategy for remediation can be achieved by increasing the required remediation time than raising the pumping rate until the time reaches a certain limitation level. So, the remediation time has to be considered as one of the essential decision variables fer optimal remediation design.

  • PDF

Generation of synthetic accelerograms using a probabilistic critical excitation method based on energy constraint

  • Bazrafshan, Arsalan;Khaji, Naser
    • Earthquakes and Structures
    • /
    • 제18권1호
    • /
    • pp.45-56
    • /
    • 2020
  • The application of critical excitation method with displacement-based objective function for multi degree of freedom (MDOF) systems is investigated. To this end, a new critical excitation method is developed to find the critical input motion of a MDOF system as a synthetic accelerogram. The upper bound of earthquake input energy per unit mass is considered as a new constraint for the problem, and its advantages are discussed. Considering this constraint, the critical excitation method is then used to generate synthetic accelerograms for MDOF models corresponding to three shear buildings of 10, 16, and 22 stories. In order to demonstrate the reliability of generated accelerograms to estimate dynamic response of the structures, three target ground motions with considerable level of energy contents are selected to represent "real critical excitation" of each model, and the method is used to re-generate these ground motions. Afterwards, linear dynamic analyses are conducted using these accelerograms along with the generated critical excitations, to investigate the key parameters of response including maximum displacement, maximum interstory drift, and maximum absolute acceleration of stories. The results show that the generated critical excitations can make an acceptable estimate of the structural behavior compared to the target ground motions. Therefore, the method can be reliably implemented to generate critical excitation of the structure when real one is not available.

아웃도어 레크리에이션 참여자의 친환경행동 형성과정에 관한 근거 이론적 분석 (Grounded Theory Analysis on the Formation Process of Pro-environmental Behavior for Outdoor Recreation Participants)

  • 김봉주;박수정;김민규
    • 한국체육학회지인문사회과학편
    • /
    • 제54권5호
    • /
    • pp.607-618
    • /
    • 2015
  • 본 연구의 목적은 아웃도어 레크리에이션 참여자의 친환경행동에 이르는 과정, 친환경행동, 지속요인 및 제약요인 등 참여과정의 전반전인 요인을 탐색하고, 이들 사이에 논리적인 연관성을 밝혀 이론 모형을 만드는데 있다. 이를 위해 근거 이론적 분석 방법을 적용하여 해석하였다. 첫째, 인과적 조건과 상황적 맥락이 순차적 영향에 의해 아웃도어 레크리에이션 참여자의 친환경행동이 형성되었다. 둘째, 중심현상인 친환경행동에 참여하는 아웃도어 레크리에이션 참여자는 친환경행동과 관련된 독특한 지속요인과 제약요인을 경험하면서도, 일반적인 지속요인 및 제약요인이 부분적으로 나타났다. 셋째, 결과의 친환경 여가활동으로 정착은 중재적 조건의 참여지속요인과 상호작용전략의 동호회에 부분적으로 환류 되는 것으로 분석되었다. 본 연구를 통해 도출된 결과는 아웃도어 레크리에이션 참여자의 여가참여 경험 및 여가제약을 폭넓게 이해하고, 관련 후속 연구들 간의 유기적 결합을 통한 연구진보에 도움을 줄 수 있을 것이다.

구전 제약요인 측정도구 개발에 대한 연구 - SNS 광고를 중심으로 - (A Study on Development of Measurement Tools for Word-of-Mouth Constraint Factors - Focusing on SNS Advertising -)

  • 윤대홍
    • 경영과정보연구
    • /
    • 제38권2호
    • /
    • pp.209-223
    • /
    • 2019
  • 본 연구는 소셜네트워크에서 SNS 광고에 대한 구전 제약요인의 개념과 측정도구 개발을 통하여 온라인 구전을 활성화하는데 그 목적이 있다. 이런 연구 목적을 달성하기 위해 3단계의 연구를 수행하였다. 첫째, 문헌고찰과 정성적 조사방법을 통하여 구전 제약에 대한 개념과 범위에 대하여 탐색적 조사(표적 집단 면접과 심층면접, 전문가 면접)를 실시하였다. 둘째, 개발된 측정항목은 정제작업을 위해 설문 조사를 실시하여 측정문항에 대한 신뢰성과 타당성 검증을 하였다. 셋째, 개발된 측정문항과 다른 주요 구성개념과 관계를 살펴봄으로써 측정항목의 예측타당성을 검증하였다. 연구결과 6개의 구성요인과 이에 대한 총 23개의 측정문항이 도출되었으며, 각각 내재적 및 대인적 제약(심리적 민감성, 보상적 민감성, 타인평가 민감성), 구조적 제약(신뢰성, 정보성, 오락성)으로 명명하였다. 정성적 연구와 정량적 연구를 통해 구전 제약의 측정문항을 개발하였으며, SNS 성과 및 평가 측면에서 SNS 광고 구전의 제약요인으로 작용하고 있는 사회적, 심리적, 환경적인 방해 요인들을 구전 제약의 관점에서 통합적으로 살펴보았다. 본 연구를 통해 온라인 구전 제약에 대한 체계적이고 실증적인 연구수행을 위한 기본 틀과 효과적인 SNS 구전을 이끌어 낼 수 있을 것이다.

Policy research and energy structure optimization under the constraint of low carbon emissions of Hebei Province in China

  • Sun, Wei;Ye, Minquan;Xu, Yanfeng
    • Environmental Engineering Research
    • /
    • 제21권4호
    • /
    • pp.409-419
    • /
    • 2016
  • As a major energy consumption province, the issue about the carbon emissions in Hebei Province, China has been concerned by the government. The carbon emissions can be effectively reduced due to a more rational energy consumption structure. Thus, in this paper the constraint of low carbon emissions is considered as a foundation and four energies--coal, petroleum, natural gas and electricity including wind power, nuclear power and hydro-power etc are selected as the main analysis objects of the adjustment of energy structure. This paper takes energy cost minimum and carbon trading cost minimum as the objective functions based on the economic growth, energy saving and emission reduction targets and constructs an optimization model of energy consumption structure. And empirical research about energy consumption structure optimization in 2015 and 2020 is carried out based on the energy consumption data in Hebei Province, China during the period 1995-2013, which indicates that the energy consumption in Hebei dominated by coal cannot be replaced in the next seven years, from 2014 to 2020, when the coal consumption proportion is still up to 85.93%. Finally, the corresponding policy suggestions are put forward, according to the results of the energy structure optimization in Hebei Province.