• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.2
• /
• pp.420-425
• /
• 2010

In the process of warm forging, billet is heated up to $800^{\circ}C$ and located in the upper part of die block impression. The scattered oxidized scale may cause workers burn and shortening of die life sticking to the die block impression. The separating materials sprayed in die block cause harmful dust, harmful mist, fume, and bad odor which contaminate workshop environment. The process is classified as one of the avoided jobs and make the planned output achievement difficult. Development of an elimination device to clear out the contaminating materials in the workshop and improvement of the unsatisfactory maintenance method to fix the abrasion of die block impression which delays the dead line, cost increases needs to be developed. In this research, I tried to solve the problems caused in warm forging of bronze pipe joint such as the billet heating process, die maintenance, and manufacturing cost through improvement of warming forging manufacturing method and die maintenance method and eliminating harmful gas which will make the workshop more environment friendly.

• Ceramist
• /
• v.22 no.2
• /
• pp.133-145
• /
• 2019

Thermoelectric energy conversion has attracted much attention because it can convert heat into electric power directly through solid state device and vice versa. Current research is aimed at increasing the thermoelectric figure of merit (ZT ) by improving the power factor and reducing the thermal conductivity. Although there have been significant progresses in increasing ZT of material systems composed of Bi, Te, Ge, Pb, and etc. over the last few decades, their relatively high cost, toxicity, and the scarcity have hindered further development of thermoelectrics to expand practical applications. In this paper, we review the current status of research in the fields of nanostructured thermoelectric materials with eco-friendly and low cost elements, such as skutterudites and oxides, for mid-high temperature applications, highlighting the strategies to improve thermoelectric performance.

• Journal of Korea Multimedia Society
• /
• v.22 no.10
• /
• pp.1142-1148
• /
• 2019

Reconstruction of the three-dimensional (3D) environment is a key aspect of augmented reality and augmented virtuality, which utilize and incorporate a user's surroundings. Such reconstruction can be easily realized by employing a Kinect device. However, multiple Kinect devices are required for enhancing the reconstruction density and for spatial expansion. While employing multiple Kinect devices, they must be calibrated with respect to each other in advance, and a marker is often used for this purpose. However, a marker needs to be placed at each calibration, and the result of marker detection significantly affects the calibration accuracy. Therefore, a user-friendly, efficient, accurate, and marker-less method for calibrating multiple Kinect devices is proposed in this study. The proposed method includes a joint tracking algorithm for approximate calibration, and the obtained result is further refined by applying the iterative closest point algorithm. Experimental results indicate that the proposed method is a convenient alternative to conventional marker-based methods for calibrating multiple Kinect devices. Hence, the proposed method can be incorporated in various applications of augmented reality and augmented virtuality that require 3D environment reconstruction by employing multiple Kinect devices.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.29 no.2
• /
• pp.1-13
• /
• 2011

The recent spotlight on electronic touch-screen display, a rapid breakthrough in the information society is evolving. Touch panel input device such as a keyboard or mouse without the use of, the on-screen character or a specific location or object on the person's hand touches a particular feature to identify the location of a panel is to be handled. The touch screen on the touch panel is used in the Ag paste is used mostly for low-curable paste. The thermal-curing paste according to the drying process of thermal energy consumption and improve the working environment of organic solvents have problems. In this study, Ag paste used in the non-thermal curing friendly and cost-effective UV curable paste was prepared. Current commercially available thermal-curable binder, was used instead of the flow characteristics of UV-curable oligomers and monomers with functional groups to give a single conductive Ag paste with the addition of a pattern could be formed. Ag paste as a result, thermal-curing adhesive, hardness, resistance and excellent reproduction of fine patterns and was available with screen printing environmentally friendly could see its potential as a patterning technology.

• Journal of Fashion Business
• /
• v.25 no.3
• /
• pp.108-125
• /
• 2021

The purpose of this study is to analyze the technical pattern and product characteristics of outdoor sportswear marketed in Northern Europe and North America. Based on the results of this study, we wanted to provide practical data on the characteristics of products with high functionality and fashionability for developing outdoor sportswear. Therefore, in this study, technical pattern, textiles, details, sewing, compatibility with wearable devices, and certification of 33 marketed outdoor sportswear were analyzed. After analyzing various technical patterns, the bent arm pattern using two-piece panel and a raised arm pattern connecting the side seam with the inner seam of the sleeve appeared on the top. Additionally, the patterns of bent legs with darts in the knee, cutting the posterior, and inserting the gusset in the crotch were mainly seen in the bottoms. By analyzing product characteristics, ergonomic pattern design for easy activity and functional materials was used for climate adaptation in extreme outdoor wear. On the other hand, for outdoor wear meant for trekking or hiking, details, such as portability and easy storage, were considered. Eco-friendly materials were used while ensuring light weight and comfort. Furthermore, for convenience of life, safety, and health, wearable devices were integrated into the outdoor sportswear. Eco-friendly green certification of outdoor products was obtained for the labor environment and production process, and relevant information was provided to consumers.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.2
• /
• pp.503-510
• /
• 2020

Eco-friendly mountain railways operate on concrete rack tracks embedded on existing sharp curved and steep roads to preserve the environment in mountainous areas. Owing to the narrow roads, single lines are inevitable, and many branches are required. In branches, previous switchers and heating devices cannot be applied, because of the limited spacing for the rack and the slow removal of thick ice. To solve these problems, a switch and a heating device have been developed. The switcher changes the line by moving the block of concrete track with hydraulic actuators. The lack of discontinuity reduces the derailment risk and makes locking simple. The heating device uses high frequency induction coils to increase the efficiency and melt the thick ice rapidly. The prototype switcher and heating device were produced and operated to prove their performance. The heating device yielded a 10 times greater efficiency than the previous one. The switcher and heating device are the essential core technologies for the operation of mountain trams in winter and contribute to the spread of mountain railways to domestic or foreign resort areas by enhancing safety and efficiency. In addition, they can provide transportation rights to local residents in poor winter traffic, and bring about tourism and local economic growth.

• Korean Journal of Organic Agriculture
• /
• v.26 no.3
• /
• pp.439-452
• /
• 2018

This study was carried out to establish of environment-friendly control system and to survey the occurrence status of Ricania shanthungensis in Jeonnam province from 2016 to 2017. R. shanthungensis occurred at 1,344 ha in 61 towns of 15 cities in Gwangju and Jeonnam province. At four sites in the stationary area, the densities of eggmass and pupae were lower in 2017 than in 2016, the hatching rate decreased, and the first hatching time, emergence of adults, and the start of spawning tended to be slower. Telenomus sp., an egg parasitoid of R. shanthungensis, was found in most areas. Sunchon had the highest rate of 46.1%, followed by Muan 40.6, Goksung 29.2, Gurye 25.8, and Gwangju 17, respectively. The optimum spraying time for the control of R. shanthungensis was early March. The spraying material and the dilution multiples are 10 times of the machine oil at environmental friendly cultivation and 500 times of the chlorpriphosphate wp. at normal cultivation. When sprayed these materials, 95% of egg prohibited to hatch. There was more than 80% of the insecticidal effects on the organic materials of the machine oil emulsion, the Sophora root extrect + microbial extract agent, and the castor emulsion. For adults, Sophora root extrect + microbial extract, neem extract, and machine oil were better. Four kinds of chemical pesticides such as dinotefuran wp were effective for nymph and adult control. We have developed an adult catching device using the most preferred daylight color and behavioral habits of R. shanthungensis. The capture device consisted of two daylight compact lamps (30W and 20W), a yellow plate, and a catcher using water, and caught about 700 individuals a day. Based on the above results, we have established a system for controlling and life cycle of R. shanthungensis in Jeonnam province.

• Journal of Digital Contents Society
• /
• v.18 no.8
• /
• pp.1585-1591
• /
• 2017

In this study, we propose the application of exhibition contents using virtual environment technology in exhibition space. Research on the virtual environment is continuing. Particularly, research on virtual reality technology is one of the most active research fields. As researches and developments of augmented reality technologies have been carried out with the spread of smart phones, researches on virtual reality technologies have also made a lot of progress with emphasis on games and interactivity. Especially, development of hardware, software, and content is accelerating this year, including the development of various types of physical reality devices, especially HMD (Head Mounted Device) equipment and new product announcements. We want to study and apply the environment in which the system based on this virtual reality technology can approach and experience more user friendly in the exhibition space.

• Journal of Intelligence and Information Systems
• /
• v.17 no.2
• /
• pp.119-128
• /
• 2011

The Sensor technology and portable device capability able to collect recent user information and the information about the surrounding environment haven been highly developed. A user can be made use of various contents and the option is also extending with this technology development. In particular, the initial portable device had simply a call function, but now that has evolved into 'the 4th screen' which including movie, television, PC ability. also, in the past, a portable device to provided only the services of a SMS, in recent years, it provided to interactive video service, and it include technology which providing various contents. Also, it is rising as media which leading the consumption of contents, because it can be used anytime, anywhere. However, the contents available for the nature of user's handheld devices are limited. because it is very difficult for making the contents separately according to various device specification. To find a solution to this problem, the study on one contents from several device has been progressing. The contents conversion technology making use of the profile of device out of this study comes to the force and profile study has been progressing for this. Furthermore, Demand for a user is also increased and the study on the technology collecting, analyzing demands has been making active progress. And what is more, Grasping user's demands by making use of this technology and the study on the technology analyzing, providing contents has been making active progress as well. First of all, there is a method making good use of ZigBee, Bluetooth technology about the sensor for gathering user's information. ZigBee uses low-power digital radio for wireless headphone, wireless communication network, and being utilized for smart energy, automatic home system, wireless communication application and wireless sensor application. Bluetooth, as industry standards of PAN(Personal Area Networks), is being made of use of low power wireless device for the technology supporting data transmission such as drawing file, video file among Bluetooth device. With analyzing the collected information making use of this technology, it utilizes personalized service based on network knowledge developed by ETRI to service contents tailor-made for a user. Now that personalized service builds up network knowledge about user's various environments, the technology provides context friendly service constructed dynamically on the basis of this. The contents to service dynamically like this offer the contents that it converses with utilizing device profile to working well. Therefore, this paper suggests the system as follow. It collects the information, for example of user's sensitivity, context and location by using sensor technology, and generates the profile as a means of collected information as sensor. It collects the user's propensity to the information by user's input and event and generates profile in the same way besides the gathered information by sensor. Device transmits a generated profile and the profile about a device specification to proxy server. And proxy server transmits a profile to each profile management server. It analyzes profile in proxy server so that it selects the contents user demand and requests in contents server. Contents server receives a profile of user portable device from device profile server and converses the contents by using this. Original source code of contents convert into XML code using the device profile and XML code convert into source code available in user portable device. Thus, contents conversion process is terminated and user friendly system is completed as the user transmits optimal contents for user portable device.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2007.11a
• /
• pp.5-9
• /
• 2007

The construction method for Foamed-Concrete has not been important due to following process of construction work. However, according to the code about enhance of energy saving design policy and impact noise, noised isolation has been used in construction site so that the resistance for cracking and capability for insulating of Foamed-Concrete has been required. Therefore, new alternatives are demanded. Optimum mixing design, which can get the improvement of insulation and resistance of crack for Foamed-Concrete adding EVA chip, was derived and also the device, applying to construction site, was invented to equalize quality. This device can measure quantity of all input and placement, and show up the sum of placement and mixing design on a touch screen. This valuable construction method is friendly environment and recycling method because of using EVA chip, by-product of an EVA insole scrap burned or embedded, as a light-weight aggregate.