• Journal of Dairy Science and Biotechnology
• /
• v.32 no.2
• /
• pp.93-100
• /
• 2014

In general, whey obtained from various cheese batches is being reused, so as to improve the texture and to increase the yield and the nutrient value of the various final milk-based products. In fact, re-usage of whey proteins, including whey cream, is a common and routine procedure. Unfortunately, most bacteriophages can survive heat treatments such as pasteurization. Hence, there is a high risk of an increase in the bacteriophage population during the cheese-making process. Whey samples contaminated with bacteriophages can cause serious problems in the cheese industry. In particular, the process of whey separation frequently leads to aerosol-borne bacteriophages and thus to a contaminated environment in the dairy production plant. In addition, whey proteins and whey cream reused in a cheese matrix can be infected by bacteriophages with thermal resistance. Therefore, to completely abolish the various risks of fermentation failure during re-usage of whey, a whey treatment that effectively decreases the bacteriophage population is urgently needed and indispensable. Hence, the purpose of this review is to introduce various newly developed methods and state-of-the-art technologies for removing bacteriophages from contaminated whey and whey products.

• Journal of Korea Water Resources Association
• /
• v.53 no.8
• /
• pp.627-636
• /
• 2020

Debris flow disasters primarily occur in mountainous terrains far from cities. As such, they have been underestimated to cause relatively less damage compared with other natural disasters. However, owing to urbanization, several residential areas and major facilities have been built in mountainous regions, and the frequency of debris flow disasters is steadily increasing owing to the increase in rainfall with environmental and climate changes. Thus, the risk of debris flow is on the rise. However, only a few studies have explored the characteristics of flooding and reduction measures for debris flow in areas designated as steep slopes. In this regard, it is necessary to conduct research on securing independent disaster prevention technology, suitable for the environment in South Korea and reflective of the topographical characteristics thereof, and update and improve disaster prevention information. Accordingly, this study aimed to calculate the amount of debris flow, depending on disaster prevention performance targets for regions designated as steep slopes in South Korea, and develop an independent model to not only evaluate the impact of debris flow but also identify debris barriers that are optimal for mitigating damage. To validate the reliability of the two-dimensional debris flow model developed for the evaluation of debris barriers, the model's performance was compared with that of the hydraulic model. Furthermore, a 2-D debris model was constructed in consideration of the regional characteristics around the steep slopes to analyze the flow characteristics of the debris that directly reaches the damaged area. The flow characteristics of the debris delivered downstream were further analyzed, depending on the specifications (height) and installation locations of the debris barriers employed to reduce the damage. The experimental results showed that the reliability of the developed model is satisfactory; further, this study confirmed significant performance degradation of debris barriers in areas where the barriers were installed at a slope of 20° or more, which is the slope at which debris flows occur.

• The Korean Society of Law and Medicine
• /
• v.19 no.2
• /
• pp.41-72
• /
• 2018

In the division of labor (or teamwork) in medicine, the responsibility of medical and nursing staff should be separated or distributed to justify negligent criminal offenses. The present work refers to the standards by which the due diligence and responsibility of the individual persons are to be determined and delimited. In this context, it has been proven that objective theory as a measure of due diligence is appropriate. From a moral point of view, when assessing due diligence, it makes sense to impose greater individual or higher performance demands on the perpetrator, but law and order require that due diligence should result from socially relevant human behavior. To give objective measure of negligence and to provide the highest level of personal responsibility, so that man can not be burdened too much responsibility and it is accordingly with an equality theorem. Afterwards some points are presented, which should be considered in a concrete fact in the determination of the medical negligence. Medical action has specific characteristics such as professionalism, discretionary and exclusive, unbalance of information. These characteristics distinguish medical actions from general negligence. The general level of knowledge, the urgency, working condition and working environment of the medical facility, duration of the professional practice, assessment of the medical activity are crucial in this context. As a standard of delineation of due diligence, I have used the permitted risk and the principle of trust. In the horizontal division of labor, the principle of trust applies. The principle of trust applies in principle in cases of division of labor interaction, when doctors in the same hospital exercise their own specific occupational field or everyone works in another hospital. However, this is not true for every case. In the vertical division of labor, the principle of trust does not apply and the senior physician can not trust the assistant doctors. In this case, the principle of trust is converted into a duty of supervision for assistant doctors by the senior physician. This supervision requirement could be used as a random check.

• Journal of dental hygiene science
• /
• v.12 no.6
• /
• pp.558-565
• /
• 2012

The purpose of this study was to work related musculoskeletal disorders are a major. Occupational disease of the dental care profession is no exception. The survey was self-reported questionars of 300 dental hygienists that 268 dental hygienists reply to self-reported survey. This study results are as follows: Subjects of research analyzing the degree of physical musculoskeletal disorders pain, shoulder 90.3%, neck 89.2%, leg 83.6%, 81.7% back, hand/wrist/fingers 75.7%, arm/elbow, according to 52.8%. Therefore the work province of the research object people the musculoskeletal disorders appeared different. Generally characteristic was taller dental hygienists lower back pain and were out of less weight, study subjects had neck and arm pain. 29~33 year-old age the shoulder, over the age of 34 the arm/elbow to be high (p<0.05). Working environment to become a career, the more hand/wrist/fingers and the pain increased (p<0.05). The neck, shoulders (p<0.05), arm (p<0.01), waist high in the 3~4 years experience. And leg/foot was in the 1~2 years experience. This increase in working hours had increased pain in the neck but the hand/wrist/finger pain in the small hours of experience in the high pain(p<0.01). Conclusion of the musculoskeletal disorders of the dental hygienists often than the average for this risk is recognized. When it occurs early in treatment can be simple, but time is left to revert to normal when you do not already. Therefore, maintaining proper posture and dental hygienists, pain or fatigue appeared to accumulate immediately treated continued efforts are needed.

• International Area Studies Review
• /
• v.22 no.2
• /
• pp.163-186
• /
• 2018

The purpose of this study is to analyze the institutional conditions and problems for the transition to the North Korean economic system. As a research method, we first analyzed the legislative processes of 4th stage market reform policies (liberalization, privatization, privatization, and corporation) by major economic transition countries. And we found out the difference with North Korea. Based on this, it analyzed the process of institutionalization of North Korea's 4th stage economic reform policies (7.1 measures, comprehensive market policies, Currency reform, 6.28 policy). According to research, There are three important conditions that can not compare the changes of the North Korean market economy with those of the transition economies. First, the internal and external conditions and environment for the transition of the economic system and the role of the state and civil society are very different. Second, the means and objectives of the policy decision process and the implementation process are different. Third, it differs absolutely in terms of the nature and effectiveness of the nation's political and economic policies. Fourth, the priority, contents, and legislation process of economic policies for economic reform differ considerably from those of North Korea. Especially, when discussing the possibility of transition to the 'Chinese model', it is accompanied a considerable risk. It is because the purpose of market entry of control power in North Korea and their survival network are quite unique. In addition, China's domestic market size, population size, and type of control are quite different from North Korea. A necessary and sufficient condition for the transition of the North Korean economic system is the relaxation of physical control mechanisms and institutions in the market area. Next, it is necessary to make a legitimate institutionalization as well as an entire survey on the illegal ownership market. Based on this, it is necessary to gradually change the dependence of the domestic market on China to South Korea. In other words, this is a paradigm shift in the semi-controlled power exclusion, post-automation and domestic market.

• Korean Journal of Breeding Science
• /
• v.43 no.4
• /
• pp.233-240
• /
• 2011

Food security has been a main global issue due to climate changes and growing world population expected to 9 billion by 2050. While biodiversity is becoming more highlight, breeders are confronting shortage of various genetic materials needed for new variety to tackle food shortage challenge. Though biotechnology is still under debate on potential risk to human and environment, it is considered as one of alternative tools to address food supply issue for its potential to create a number of variations in genetic resource. The new technology, phenomics, is developing to improve efficiency of crop improvement. Phenomics is concerned with the measurement of phenomes which are the physical, morphological, physiological and/or biochemical traits of organisms as they change in response to genetic mutation and environmental influences. It can be served to provide better understanding of phenotypes at whole plant. For last decades, high-throughput screening (HTS) systems have been developed to measure phenomes, rapidly and quantitatively. Imaging technology such as thermal and chlorophyll fluorescence imaging systems is an area of HTS which has been used in agriculture. In this article, we review the current statues of high-throughput screening system in phenomics and its application for crop improvement.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.27 no.3
• /
• pp.81-89
• /
• 2019

The major problem encountered during the storage of pig slurry (PS) is the release of huge amounts of greenhouse gases (GHGs), which are dominated by methane ($CH_4$). To reduce this, concentrated sulfuric acid has been used as an additive to control the pH of pig slurry to 5.0-6.0. However, other low-risk substitutes have been developed due to some limitations to its use, such as corrosiveness, and hazards to animal and human health. In this study, sugar addition was proposed as an eco-friendly approach for limiting $CH_4$ emission from PS during storage. The pH of PS has been reduced from $7.1{\pm}0.1$ (control) to $5.8{\pm}0.1$, $4.6{\pm}0.1$, $4.4{\pm}0.1$, $4.1{\pm}0.1$, and $4.0{\pm}0.1$, by the addition of 10, 20, 30, 40, and 50 g sugar/L, respectively. Lactate, acetate, and propionate were detected as the dominant organic acids and at sugar concentration above 20 g/L, lactate concentration represented 42-72% (COD basis) of total organic acids. For 40 d of storage, $20.6{\pm}2.3kg\;CO_2\;eq./ton\;PS$ was emitted in the control. Such emission, however, was found to be reduced to $8.7{\pm}0.4$ and $0.4{\pm}0.1kg\;CO_2\;eq./ton\;PS$ at 10 and 20 g/L, respectively. Small amount of $CH_4$ from PS at 10 g/L was emitted until 30 d of storage, while for rest of storage period, it has increased to $8.7{\pm}0.4kg\;CO_2\;eq./ton\;PS$ ( 40% of the control) when methanogens have recovered by increasing pH to 7.0. By the end of storage, VS and COD removal in the control reached 24% and 27%, while their ranges reached 15-4% and 12-17% in the sugar added experiments, respectively. It was found that more than 90% of COD removal was done by aerobic biological process.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.64 no.2
• /
• pp.127-136
• /
• 2019

Sweet sorghum (Sorghum bicolor L. Moench), compared to traditional crops, has been evaluated as a useful crop with high adaptability to the environment and various uses, but cultivation has not expanded owing to a lack of related research and information in Korea. This study was conducted to estimate heading date in 'Chorong' sweet sorghum based on climate data of the last 30 years (1989 - 2018) from six regions (Jeonju, Buan, Jeongup, Imsil, Namwon, and Jangsu) in Jellabuk Province. In addition, we compared the growth and quality factors by sowing date (April 10, April 25, May 10, May 25, June 10, June 25, and July 10) in 2018. Days from sowing to heading (DSH) increased to 107, 96, 83, 70, 59, 64, and 65 days in order of the sowing dates, respectively, and the average was 77.7 days. The effective accumulated temperature for heading date was $1,120.3^{\circ}C$. The mean annual temperature was the highest in Jeonju, followed in descending order by Jeongup, Buan, Namwon, Imsil, and Jangsu. The DSH based on effective accumulated temperature gradually decreased in all sowing date treatments in the six regions during the last 30 years. DSH of the six regions showed a negative relationship with mean temperature (sowing date to heading date) and predicted DSH ($R^2=0.9987**$) calculated by mean temperature was explained with a probability of 89% of observed DSH in 2017 and 2018. At harvest, fresh stem weight and soluble solids content were higher in the April and July sowings, but sugar content was higher in the May 10 ($3.4Mg{\cdot}ha^{-1}$) and May 25 ($3.1Mg{\cdot}ha^{-1}$) sowings. Overall, the April and July sowings were of low quality and yield, and there is a risk of frost damage; thus, we found May sowings to be the most effective. Additionally, sowing dates must be considered in terms of proper harvest stage, harvesting target (juice or grain), cultivation altitude, and microclimate.

• The Korean Journal of Air & Space Law and Policy
• /
• v.33 no.2
• /
• pp.169-197
• /
• 2018

The purpose of this study is to present a reasonable and concrete standard for the Korean aviation insurance compulsory subscription system. Through this, we aim to improve the current revision of laws and regulations, and ultimately create an environment in which the safety and property of the Korean people who use aircraft with appropriate aviation insurance can be secured. In particular, by reviewing the aviation business law and its new laws and regulations enacted in 2017, the legislative improvement direction of aviation insurance will be proposed. In order to maintain the continuous growth of the air transportation industry and to make amicable compensation for the victims, considering the characteristics of the total accident, instantness, and giganticness of air accidents in which a lot of people and property are lost in the event of an accident, adequate insurance coverage is essential. In this respect, the compulsory insurance to amend the principle of freedom of contract, which is the great principle of the modern judicial system, will be persuasive. However, in comparison with foreign legislation, the legal provisions on Korea's obligation to comply with aviation insurance need to be revised around the following issues: First, it is reasonable to enforce the regulation of the mandatory aviation insurance by legislation from the Congress not by administrative regulations. Because it will force the monetary obligations of the individual such as common air carriers. Second, our law regulations respond to various kinds of air damages by using the phrase "limit of liability stipulated in international conventions". However, as we have seen in the text, the range of compensation are various according to the use of legal instruments in international conventions such as the Montreal Convention, which governs the compensation of passengers for damages to passengers today. Third, in countries with narrow territories, such as Korea, there are big differences in flying time and insurable risk between domestic and international transportation. Therefore, it is necessary to divide domestic transportation and international transportation even in the obligation to join the insurance. This dual discipline has the advantage for rookies in air carrier market who mainly start their business from domestic service. Fourth, according to Korean law, the regulations of automobile loss insurance is applicable to the aviation mandatory insurance of unmanned aerial vehicle accident which is lack of persuasion. In the future, it will be appropriate to discipline insurance for unmanned aerial vehicles with unlimited potential for development from a long-term perspective.

• Management & Information Systems Review
• /
• v.38 no.1
• /
• pp.23-41
• /
• 2019

Smart Factory is different from existing factory automation in that it aims to produce personalized products with minimum time and cost through ICT. However, previous researches, not from consumers but from product suppliers, have focused on technology trends and technology application methods. In order for Smart Factory to be successful, it must go beyond supplier-focus to meet the needs of consumers. In this study, we surveyed the purchase intention of the personalized product manufactured by smart factory. Influencing factors of purchase intention were drawn as consumers' need for uniqueness, innovativeness, need for touch, and privacy concern, based on previous research. As results of data analysis, it was confirmed that respondents were willing to purchase personalized products, and that consumers' need for uniqueness, innovativeness, and need for touch had a significant impact on purchase intention of personalized products. Our findings can be summarized as follows. First, Consumers' need for uniqueness was found to have positive effects(${\beta}=0.168$) on purchase intention of personalized products. The desire to differentiate themselves from others will be reflected in their personalized products. Therefore, consumers with a higher desire for uniqueness tend to be more willing to purchase personalized products. Second, consumer innovativeness was found to have positive effects(${\beta}=0.233$) on purchase intention of personalized products. Personalized shoes suggested in this study is a new type of personalized product that is manufactured by the latest information and communication technologies such as multi-function robots and 3D printing. Therefore, consumers seeking innovative new experiences are more willing to purchase personalized products. Third, need for touch was found to have positive effects(${\beta}=0.299$) on purchase intention of personalized products. In a smart factory environment, prosuming participation is given to consumers. If consumers participate in the product development process and reflect their requirements on the product, they are expected to increase their purchase intention by virtually satisfying the need for touch. Fourth, privacy concern was found to have no significantly related to purchase intention of personalized products. This is interpreted as a willingness to tolerate the risk of exposing personal information such as home address, telephone number, body size, and preference for consumers who feel highly useful in personalized products.