• Journal of environmental and Sanitary engineering
• /
• v.23 no.3
• /
• pp.31-38
• /
• 2008

This study was conducted to investigate the effects of environmental factor such as temperature, salinity, turbidity, pH and dissolved oxygen on the growth of Vibrio spp.. In this survey, total 56 seawater samples were obtained from 8 different sites of the Incheon coastal area during the periods from april 2008 to october 2008. Enumeration of Vibrio spp. was determined by using the most probable number(MPN) procedure. Isolation rates of V. parahaemolyticus, V. vulnificus, V. cholerae in all samples tested were 44.0%, 21.4% and 13.1%, respectively. The enumeration of Vibrio spp. was very low correlated with water temperature and pH and negatively correlated with salinity, dissolved oxygen and turbidity. We found salinity to be the parameter most highly correlated with the enumeration of Vibrio spp. The highest rate of antibiotic resistance of V.vulnificus and V.parahaemolyticus was Cefazolin(11.5%), Ampicillin(70.8%), respectively.

• The Journal of the Korea Contents Association
• /
• v.6 no.5
• /
• pp.42-55
• /
• 2006

In most multimedia systems, the environment is considered as a passive background. In virtual environment simulating real world, however, terrain affects many events such as wind, rain, cloud. Therefore, it is necessary to model terrain and meteorological phenomenon in order to simulate realistic virtual environment. In those modeling, not only height and location information but also environmental factors such as temperature and humidity are important. An event is composed of many activities and subevents based on causality and consists of precondition , procedure and effects. Each part of an event is formulated in terms of a number of parameter variables, which correspond to its associated factors on existence or states of entities and relation. This paper represents terrain and environmental factor using contour map. Moreover, we define various events and their procedures in terms of causality in virtual environment.

• Journal of Sensor Science and Technology
• /
• v.22 no.5
• /
• pp.364-368
• /
• 2013

Vibrational energy harvester based on piezoelectricity has been expected to be the dominant energy harvesting technology due to the advantages of high conversion efficiency, light weight and small size, night operation, etc. Its commercialization is just around the corner but the integration with power management electronics should be solved in advance. In this paper, therefore, fully-integrated design environment for piezoelectric energy harvesting systems is presented to assist co-design with the power management electronics. The proposed design environment is capable of analyzing the energy harvester including the package-induced damping effects and simulating the device and its power management electronics simultaneously. When the developed design environment was applied to the fabricated device, the simulated resonant frequency matched well with the experimental result with a difference of 2.97% only. Also, the complex transient response was completed in short simulation time of 3,001 seconds including the displacement distribution over the device geometry. Furthermore, a full-bridge power management circuit was modeled and simulated with the energy harvester simultaneously. Therefore the proposed, fully-integrated design environment is accurate and fast enough for the contribution on successful commercialization of piezoelectric energy harvester.

• International Journal of Control, Automation, and Systems
• /
• v.1 no.3
• /
• pp.289-300
• /
• 2003

In this paper, we introduce an identification method in Fuzzy Relation-based Fuzzy Neural Networks (FRFNN) through a hybrid identification algorithm. The proposed FRFNN modeling implement system structure and parameter identification in the efficient form of "If...., then... " statements, and exploit the theory of system optimization and fuzzy rules. The FRFNN modeling and identification environment realizes parameter identification through a synergistic usage of genetic optimization and complex search method. The hybrid identification algorithm is carried out by combining both genetic optimization and the improved complex method in order to guarantee both global optimization and local convergence. An aggregate objective function with a weighting factor is introduced to achieve a sound balance between approximation and generalization of the model. The proposed model is experimented with using two nonlinear data. The obtained experimental results reveal that the proposed networks exhibit high accuracy and generalization capabilities in comparison to other models.er models.

• Journal of KSNVE
• /
• v.7 no.4
• /
• pp.701-708
• /
• 1997

Up to now, numerical methods such as Finite Element Method(FEM) or Boundary Element Method(BEM) have been widely used to find the optimized resonator's position during designing a car intake system. However, these methods are not useful at the first stage of car design since it is not easy to change a numerical model consist of a large mesh size. A software has been developed to cover the defects using 4-pole parameter method. The software is running at Windows 95 environment for a user's convenience. To show its usefulness, it is applied to a real automobile intake system.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.12
• /
• pp.1261-1267
• /
• 2004

As the optical disk drives are designed for portable and hostile environment, they have a possibility to miss the track and not to read the data. The shock response of optical disk drives must be analyzed. This research shows the shock response analysis of the optical disk drive. The optical disk drive is modeled as the lumped parameter system in consideration of the pickup and the disk. The lumped parameter model is compared with finite element model in order to verify results. Finally, shock responses are compared with the change of the shock magnitude and the duration.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.2
• /
• pp.540-552
• /
• 1996

In this paper, a compensation method of disturbance using a disturbance observer is proposed for a force control of a pneumatic robot manipulator. The generated torque by a pneumatic actuator can be estimated based on the pressure signals. The inner torque control system is constructed by feeding back the generated torque to improve the dynamic characteristics of the actuator. In order to reduce the influence of disturbances comprising friction torque, parameter variations of plant and environment and so on, the reaction torque control system is constructed with a disturbance observer which estimates the disturbances based on the reference input to the inner torque control system and the reaction torque sensed with a forced sensor. From some simulations and experiments, it is confirmed that the proposed control system is effective to improve the robustness for the friction torque and the parameter change of object in the force control of a pneumatic robot manupulator.

• Advances in nano research
• /
• v.6 no.3
• /
• pp.201-217
• /
• 2018

In the present research, wave propagation characteristics of a rotating FG nanobeam undergoing rotation is studied based on nonlocal strain gradient theory. Material properties of nanobeam are assumed to change gradually across the thickness of nanobeam according to Mori-Tanaka distribution model. The governing partial differential equations are derived for the rotating FG nanobeam by applying the Hamilton's principle in the framework of Euler-Bernoulli beam model. An analytical solution is applied to obtain wave frequencies, phase velocities and escape frequencies. It is observed that wave dispersion characteristics of rotating FG nanobeams are extremely influenced by angular velocity, wave number, nonlocal parameter, length scale parameter, temperature change and material graduation.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.713-716
• /
• 2007

In this paper, we consider one of robust control system, fuzzy PI+fuzzy D controller dealing with noise, load, changed parameters of plant. We apply PI+D controller with a design for output of differential function and, we plan fuzzy controller with input for PID parameter of PI+D controller so We design control system meet with the change of environment with robust in relation to change of parameter. Fuzzy control is possessed of easy 4 rules and membership function and We design fuzzy PI+fuzzy D controller. Plant of this paper make a choice of 3 phase induction motor.

• Journal of Korea Multimedia Society
• /
• v.7 no.12
• /
• pp.1700-1707
• /
• 2004

Nowaday, market size of digital image in world around is looks to rapidly growth. For this, Texture mapping has traditionally been used to add realism to computer graphics images. Therefore to make our image realistic, we need to give the various kind of objects material parameter and environment lighting. To present the completed marble we use passing back algorithm and combination with channel of a material. In experimental result of this paper that application by passing back algorithm and varying the parameter such as scale, period, distortion, octaves of noise make showing the superiority of optimized rendering of spheres and perfect another marble effects.