• 한국해양공학회지
• /
• 제32권5호
• /
• pp.367-371
• /
• 2018

Plywood is one of the important materials in LNG cargo containment systems, and, due to the characteristics of the wood, its properties vary greatly depending on the humidity conditions in the storage facility. Due to the distribution environment of plywood, there is a high probability of long-term exposure to the domestic seasonal environment. Considering an environment in which the humidity changes greatly according to the seasons in Korea and the characteristics of the wood, it is necessary to acquire data on changes in the characteristics of the plywood for accurate quality control. In this study, the moisture content of plywood was determined experimentally to reflect the seasonal environmental conditions of shipyards in Korea. A noticeable change in the thermal conductivity was confirmed experimentally.

• 패션비즈니스
• /
• 제6권4호
• /
• pp.151-162
• /
• 2002

This study aims to reveal the effects of shoe size room on the inner environment of shoes by examining the changes of footskin temperature, temperature and humidity of the shoes, and psychological responses. The following conclusions were made: 1. Skin temperature had significant differences according to shoe sizes in the inner foot parts (right/left) and the outer foot part (left). As time went, skin temperature was distributed as follows: Type A > Type C > Type B. 2. Skin temperature appeared in the following order: instep > inner foot > outer foot. 3. The temperature within the shoes had significant differences: Type A > Type C > Type B. But no significance was recognized in the humidity within the shoes: Type B > Type C > Type A. 4. Some significance was noticed in the psychological responses of size fitness and comfortableness. In size fitness, Type B was responded to be fitting, Type A little small, and Type C rather big. Moisture had similar changes according to three shoe sizes, but humid was the response as time went. Comfortableness appeared in the order of Type C > Type B > Type A.

• 근관절건강학회지
• /
• 제30권3호
• /
• pp.263-272
• /
• 2023

Purpose: The aim of this study was to provide a scientific basis for shelf life and re-establish the shelf life in a hospital environment by investigating the validity periods of various packaging materials. Methods: We selected six departments to store sterilized items, prepared 482 sterilized items, and stored them for 12 months. Each sample was tested using a microbiological culture in the laboratory every two weeks. When the result was positive, the sample was considered contaminated. The temperature and relative humidity were measured using an automatic control system to investigate the storage environment during the study period. Results: Except for two samples, which were positive in the 22nd and 28th weeks, 480 samples were negative. The temperature and relative humidity of the sample storage area were measured every week. The annual average temperature was 23.6±1.6℃, and the mean relative humidity was 35.1±15.2%. The cabinets used in this study were the two-open and four-closed types. Conclusion: This study confirmed the validity of the expiration date in a hospital environment. Based on the results, the nonwoven fabric remained sterile for more than nine months. No case of contamination of the paper-plastic pouch packaging was observed, owing to the microbial culture for two months.

• 전기학회논문지P
• /
• 제55권1호
• /
• pp.26-30
• /
• 2006

For the purpose of developing capacitive humidity sensor having interdigital electrodes, interdigital electrode was modeled and simulated to obtain capacitance and sensitivity as a function of geometric parameters like the structural gap and thickness. For the development of ASIC, switched capacitor signal processing circuits for capacitive humidity sensor were designed and simulated by Cadence using $0.25{\mu}m$ CMOS process parameters. The signal processing circuits are composed of amplifier for voltage gain control, and clock generator for sensor driving and switch control. The characteristics of the fabricated sensors are; 1) sensitivity is 9fF/%R.H., 2) temperature coefficient of offset(TCO) is $0.4%R.H./^{\circ}C$, 3) nonlinearity is 1.2%FS, 4) hysteresis is 1.5%FS in humidity range of $3%R.H.{\sim}98%R.H.$. The response time is 50 seconds in adsorption and 70 seconds in desorption. Fabricated process used in this capacitive humidity sensor having interdigital electrode are just as similar as conventional IC process technology. Therefore this can be easily mass produced with low cost, simple circuit and utilized in many applications for both industrial and environmental measurement and control system, such as monitoring system of environment, automobile, displayer, IC process room, and laboratory etc.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제50권3호
• /
• pp.144-148
• /
• 2001

For the purpose of developing capacitive humidity sensor having interdigit electrodes, interdigit electrode was modeled and simulated to obtain capacitance and sensitivity as a function of geometric parameters like the structural gap and thichness. For the development of ASIC, switched capacitor signal conditioning circuits for capacitive humidity sensor were designed and simulated by cadence using 0.25um CMOS process parameters. The signal conditioning circuits are composed of amplifier for voltage gain control, and clock generator for sensor driving and switch control The characteristics of the fabricated sensors are; 1) sensitivity is 9fF/%R.H., 2) temperature coefficient of offset(TCO) is 0.4%R.H./$^{\circ}C$, 3) nonlinearity is 1.2%FS, 4) hysteresis is 1.5%FS in humidity range of 3%R.H. ${\sim}$ 98%R.H.. The response time is 50 seconds in adsorption and 70 seconds in desorption. Fabricated process used in this capacitive humidity sensor having interdigit electrode are just as similar as conventional IC process technology. Therefore this can be easily mass produced with low cost, simple circuit and utilized in many applications for both industrial and environmental measurement and control system, such as monitoring system of environment, automobile, displayer, IC process room, and laboratory etc..

• 설비공학논문집
• /
• 제21권4호
• /
• pp.236-242
• /
• 2009

In finishing work, defects are often taken place by many factors. One of them is the thermo-humidity condition on the work surface as coating and anointing adhesives. Thus, the condition of thermo-humidity on work surface should be checked prior to the finishing work. However, many construction companies show a tendency to overlook it because not only are measurement tools so expensive but they don't have skilled hands about those tools. Therefore, we propose the measurement method that makes it easy to recognize surface thermo-humidity condition so as to reduce constructional flaws. And then we test this product. The test progresses to four stages with various conditions. We evaluate its usefulness and application possibility of this product in the field.

• 대한건축학회논문집:구조계
• /
• 제34권3호
• /
• pp.43-52
• /
• 2018

This study is conducted to evaluate the performance of ceramic panels and painting materials for humidity control which are developed in non-plastic room temperature hardening structure as part of a project to improve a residential environment for the low-income class, rather than the performance of high-priced humidity control materials that are produced with the existing plasticity processing. The testing methods included the measurements of absorption & desoprtion of humidity per material; Mock-up Testing; an evaluation method of comparing the absorption & desoprtion performances of Ecocarat, ceramic panels and painting materials through Living Lab. According to the measurements of absorption & desoprtion per material, ceramic panels, E panel, and ceramic painting material showed 73.3g/m2, 96.6g/m2, and 111.1g/m2, respectively. That is, the performance of humidity control of each material was found to be good in the order of: Ceramic Paint > E panel > Ceramic Panel. According to performance evaluation testing with Mock-up test and Living Lab, Ceramic Paint, Ecocarat, and Ceramic Panels showed better absorption & desoprtion performances in the order.

• 생물환경조절학회지
• /
• 제9권2호
• /
• pp.115-119
• /
• 2000

표고버섯은 담자균류 송이과에 속하는 식용 버섯으로, 영양 성분 및 약리적 효능이 높기 때문에 동양인에게 중요한 버섯이며, 점차로 생산량과 소비량이 증가하고 있다. 본 연구에서는, 고품질 표고버섯 생산시기의 기상자료를 분석하여 표고버섯의 품질에 영향을 주는 생육 환경요인을 분석하였다. 이를 위하여 1997~1998년 국내 고품질 표고버섯이 생산되는 지역중 3지역(부여, 원주, 장흥)을 선정하였다. 표고버섯의 다량 발생시기 20일 기준으로 기상분석시기 15일을 선정하였다. 환경요인으로는 발생시기의 일 온도차, 일습도차, 일평균온도, 일 평균습도 및 풍속을 분석하였다. 발생기간중의 일 평균온도는 버섯 발생 온도 하한치인 $7^{\circ}C$ 이하에서 적정온도 $20^{\circ}C$까지의 변화를 보였고, 일 온도차는 주간에는 $7~20^{\circ}C$, 야간에 $0~-2^{\circ}C$의 범위를 나타냈다. 일평균습도 50~70%으로 강우에 따라서 변화 폭이 컸으며, 일습도차는 40~60%의 차를 나타냈다. 풍속은 1~4m.$s^{-1}$이었다 .따라서 화고, 동고의 생육환경은 일반적인 표고버섯의 적정 생육 조건과는 큰 차이를 보였다. 생육기간동안의 일 온도차, 일습도차, 저 습도, 풍속 등의 환경 조건은 고품질 표고버섯 발생의 요인의 하나라고 추정된다. 이 연구결과는 버섯의 시설재배시 고품질 표고버섯 생산을 위한 환경조절기술로 적용될 수 있을 것으로 판단된다.

• 한국생물환경조절학회:학술대회논문집
• /
• 한국생물환경조절학회 2000년도 학술발표논문집 Proceeding of Bio-Environment control
• /
• pp.51-54
• /
• 2000

• 한국생물환경조절학회:학술대회논문집
• /
• 한국생물환경조절학회 2000년도 학술발표논문집 ProceedingofBio-Environment control
• /
• pp.38-41
• /
• 2000