• Journal of the Korean Applied Science and Technology
• /
• v.34 no.4
• /
• pp.874-882
• /
• 2017

As the interest on the air-pollution is gradually rising up at home and abroad, automotiv e and fuel researchers have been working on the exhaust emission reduction from vehicles through a lot of approaches, which consist of new engine design, innovative after-treatment systems, using clean (eco-friendly alternative) fuels and fuel quality improvement. This research has brought forward three main issues : evaporative, performance, air pollution. In addition, researcher studied the environment problems of the bio-ethanol, bio-butanol, bio-ETBE (Ethyl Tertiary Butyl Ether), MTBE (Methyl Tert iary Butyl Ether) fuel contained in the fuel as octane number improver. The researchers have many dat a about the health effects of ingestion of octane number improver. However, the data support the con clusion that octane number improver is a potential human carcinogen at high doses. Based on the bio-fuel and octane number improver types (bio-ethanol, bio-butanol, bio-ETBE, MTBE), this paper dis cussed the influence of gasoline fuel properties on the evaporative emission characteristics. Also, this p aper assessed the acceleration and power performance of gasoline vehicle for the bio-fuel property. As a result of the experiment, it was found that all the test fuels meet the domestic exhaust gas standards, and as a result of measurement of the vapor pressure of the test fuels, the bio - ethanol : 15 kPa and the biobutanol : 1.6 kPa. thus when manufacturing E3 fuel, Increasing the biobutanol content reduces evaporation gas and vapor pressure. In addition, Similar accelerating and powering performance was shown for the type of biofuel and when bio-butanol and bio-ethanol were compared accelerated perf ormance was improved by about 3.9% and vehicle power by 0.8%.

• Journal of Distribution Science
• /
• v.9 no.3
• /
• pp.5-14
• /
• 2011

One of the new roles of modern retail stores is to supply consumers with a memorable experience. In Korea, enhancing a store's environment so that customers remember a unique shopping experience is recognized as a sound strategy for strengthening the store's competitiveness. Motivated by this incentive, awareness of the experience-store concept is starting to increase in various categories of the retail industry. However, many experience stores, except in a few cases, have yet to derive a significant profit, explaining why Korean consumers are somewhat unfamiliar with, yet fascinated by, the experience stores that now exist in the country. Consumer satisfaction directly, and indirectly, affects a company's future profit and potential financial gain; customer satisfaction also affects loyalty. Therefore, knowing the significant factors that increase satisfaction and loyalty is essential for any company, in any field, to be able to effectively differentiate itself from the competition. Intrigued by increased competition opportunities, most Korean companies have adopted experience-store marketing strategies. When establishing the most effective processes for increasing sales and achieving a sustainable competitive advantage of a new concept, companies should consider certain factors that influence consumers' ability to accept new concepts and ideas. The Technology Acceptance Model (TAM) is a theory that models how people accept new concepts. TAM proposes the following two factors that influence a person's decisions about how, and when, he or she will use a new product: "perceived usefulness" and "perceived ease of use." Much of the existing research has suggested that a person's character also affects the process for accepting new ideas. Such personal character attributes as individual preferences, self-confidence, and a person's values, traits, and/or skills affect the process for willingly consenting to try something new. It will be meaningful to establish how the TAM theory's components, as well as personal character, affect individuals accepting the experience-store concept. To that end, as it pertains to an experience store, the first goal of the study is to examine the influence of innovative factors (perceived usefulness and perceived ease of use) on satisfaction and loyalty. The second objective is to define the moderate effect of consumers' personal characteristics on the model. The proposed model was tested on 149 respondents who were engaged in leisure sports activities and bought sports outdoor garments and equipment. According to the study's findings, the satisfaction and loyalty of an experience store can be explained by perceived usefulness and perceived ease of use, with the study's results demonstrating the stronger of the two factors being "perceived ease of use." The study failed to explain the effects of a person's character on the model. In conclusion, when the companies that operate the experience stores execute their marketing and promotion strategies, they should stress the stores' "ease of use" product components. Additionally, it can be extrapolated from the study data that since the experience-store idea is still relatively unfamiliar to Korean consumers, most customers are not yet able to evaluate, nor take a position regarding, their respective attitudes toward experience stores.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.6
• /
• pp.904-911
• /
• 2015

The objective of this study was to investigate the quality characteristics of traditional wine using an radio-frequency identification (RFID) system annexed to a fermenter. In this study, we proposed an RFID-based data transmission scheme for monitoring fermentation of traditional alcoholic beverages. The pH, total acidity, total sugar, soluble sugar, free sugar, alcohol content, and organic acids of were investigated and subjected to fermentation of traditional alcoholic beverages three times. The pH ranged from 7.98, 7.95, and 7.68 at day 0, decreased drastically to 3.31~2.96 at day 2, and then slowly increased to the end point, finally reaching 3.34 at day 20. Acidity tended to increase quickly with time, especially for all samples after day 2. The fermentation environment induced a sudden increase acidity in reactants and indicated a low pH. The total sugars during fermentation quickly decreased to the range of 20.3, 22.43, and 19.2% at day 2, and the slope of reduction steadily decreased to 5.1, 6.1, and 4.8% at day 10. On the other hand, the alcohol content showed the reverse trend as total sugars. The alcohol content also showed the same pattern as total acids, showing the highest alcohol content of 17.3% (v/v) on day 20. In this study on traditional wine fermentation using an RFID system, we showed that pH, soluble sugar, and alcohol content can be adopted as key indicators for quality control and standardization of traditional wine manufacturing.

• Journal of the Korean Society of Child Welfare
• /
• no.56
• /
• pp.133-164
• /
• 2016

This study investigated the effect of housing poverty in childhood on adolescents' subjective well-being. Specifically, this study examined whether the major factors that have been known to affect adolescents' well-being (i.e., family relationships, peer relationships, school adjustment etc.) mediated the relationship between housing poverty and adolescents' well-being. And then this study aimed to present an empirical evidence for establishing policies against housing poverty in order to enhance adolescent's subjective happiness. Data were derived from the $1^{st}$, $4^{th}$, and $7^{th}$ surveys of the Korea Welfare Panel Study(KOWEPS), and the sample included. 512 high school children in the $7^{th}$ survey. This study utilized structural equation modeling. Housing poverty was measured by the sub-minimum standard housing condition and the household's burden of housing expenditure. Family relationship, as a mediator, was measured by parental involvement in education, parental monitoring, and family conflicts. Another mediator, school adjustment was measured by school environment and school bonding, and the last mediator, peer relationship was measured by friend attachment and peer attachment. The results showed that housing poverty had significant negative effects on the adolescents' subjective well-being. The sub-minimum standard housing condition with inadequate size and facilities negatively affected adolescents' relationships with family directly and subjective well-being indirectly. In addition, the negative family relationships due to the sub-minimum standard housing condition negatively affected adolescents' subjective well-being through school adjustment and peer relationships. The greater the proportion of income a household spends on housing expenditure, the less likely for adolescents to report positive well-being. The sub-minimum standard housing condition had indirect effects through family relationships, whereas the household's housing expenditure directly affected adolescents' subjective well-being. This study suggested the necessity of interventions to alleviate housing poverty for adolescents' families and lays the groundwork for housing poverty policies in Korea.

• Geophysics and Geophysical Exploration
• /
• v.8 no.1
• /
• pp.7-17
• /
• 2005

The determination of seismic velocities in refractors for near-surface seismic refraction investigations is an ill-posed problem. Small variations in the computed time parameters can result in quite large lateral variations in the derived velocities, which are often artefacts of the inversion algorithms. Such artefacts are usually not recognized or corrected with forward modelling. Therefore, if detailed refractor models are sought with model based inversion, then detailed starting models are required. The usual source of artefacts in seismic velocities is irregular refractors. Under most circumstances, the variable migration of the generalized reciprocal method (GRM) is able to accommodate irregular interfaces and generate detailed starting models of the refractor. However, where the very-near-surface environment of the Earth is also irregular, the efficacy of the GRM is reduced, and weathering corrections can be necessary. Standard methods for correcting for surface irregularities are usually not practical where the very-near-surface irregularities are of limited lateral extent. In such circumstances, the GRM smoothing statics method (SSM) is a simple and robust approach, which can facilitate more-accurate estimates of refractor velocities. The GRM SSM generates a smoothing 'statics' correction by subtracting an average of the time-depths computed with a range of XY values from the time-depths computed with a zero XY value (where the XY value is the separation between the receivers used to compute the time-depth). The time-depths to the deeper target refractors do not vary greatly with varying XY values, and therefore an average is much the same as the optimum value. However, the time-depths for the very-near-surface irregularities migrate laterally with increasing XY values and they are substantially reduced with the averaging process. As a result, the time-depth profile averaged over a range of XY values is effectively corrected for the near-surface irregularities. In addition, the time-depths computed with a Bero XY value are the sum of both the near-surface effects and the time-depths to the target refractor. Therefore, their subtraction generates an approximate 'statics' correction, which in turn, is subtracted from the traveltimes The GRM SSM is essentially a smoothing procedure, rather than a deterministic weathering correction approach, and it is most effective with near-surface irregularities of quite limited lateral extent. Model and case studies demonstrate that the GRM SSM substantially improves the reliability in determining detailed seismic velocities in irregular refractors.

• Korean Journal of Soil Science and Fertilizer
• /
• v.22 no.4
• /
• pp.301-306
• /
• 1989

For the agricultural utilization of Korean forest land resources, which constitutes most of country, the distribution of environment and soil physico-chemical properties of establishable grass lands were clarified. The surveyed data were analized for the reasonable utilization and management of establishable grass land. The results were as follows ; 1. About 50.2% of the grass lands to be established were located under the 200m in altitude. The higher the altitude was, the more the organic matter content. 2. Tall type grass species such as Miscanthus purpurascens, Purple eulalia, and Themeda Japonica covered 71.3% of the natural vegetation in the soils of grass land to be established. 3. The extent of sandy and clayey soils which might be limited in the establishment of grassland was only 3.3%, meanwhile majority of the soils were in the favourable condition for grassland that is about 94% have more than 20cm in available soil depth and about 60.5% of the soils have less than 10% of gravels and stones in the soil profiles. 4. The chemical properties of the prearranged grassland soils were worse than the established grasslands, especially in the content of available $P_2O_5$. 5. The amount of fertilizer recommended for meadow were 286kg of nitrogen per hectare, 271kg of phosphorus, 224kg of potassium and 2040kg of calcium per hectare, but for grazing land were 201, 204, 136 and 1920kg/ha respectively.

• Korean Journal of Soil Science and Fertilizer
• /
• v.40 no.1
• /
• pp.51-56
• /
• 2007

The toxicities of contaminated soils with 8 consecutive year applications of three levels (12.5, 25.0, and $50.0t\;dry\;matter\;ha^{-1}yr^{-1}$) of four organic sludge [municipal sewage sludge (MSS), industrial sewage sludge (ISS), alcohol fermentation processing sludge (AFPS) and leather processing sludge (LPS)] on earthworm (Eisenia fetida) were examined by using microcosm container in the laboratory. Results were compared with those of pig manure compost (PMC) treated soil. In tests with three treatment levels (12.5, 25.0, and 50.0 t per plot), ISS treated soil showed higher contents of Cu (18.9~26.2 fold), Cr (7.7~34.7 fold), and Ni (14.8~18.8 fold) at 8 years post treatment, than PMC treated soil. LPS treated soil showed higher contents of Cr (35.7~268.0 fold) and Ni (4.5~7.6 fold) than PMC treated soil. There were no great differences in heavy metal contents among MSS, AFPS, and PMC treated soils. In these contaminated soils, earthworm mortalities of MSS and AFPS treated soils at 8 weeks post-exposure were similar to those of PMC treated soil regardless of each treatment level. Toxic effect (26.7~96.7 mortality) on the ISS and LPS treated soils was significantly higher than one of PMC treated soil, with an exception of LPS soil treated with 25.0 t per plot. At 16 weeks post-exposure, earthworm mortalities of AFPS' 12.5 and 25.0 t treated soils were similar to those of PMC treated soil. Toxic effect (53.3~100 mortality) on the 12.5, 25.0, and 50.0 t treated soils of MSS, ISS and LPS, and AFPS' 50.0 t treated soils was significantly higher than those of PMC treated soil. The data suggested that the 12.5, 25.0, and 50.0 t of MSS, ISS and LPS, and AFPS' 50.0 t treated soils were evaluated to have toxicity on earthworm.

• Korean Journal of Remote Sensing
• /
• v.37 no.6_1
• /
• pp.1559-1572
• /
• 2021

The response of vegetation under the crop stress condition was evaluated using structural, biochemical, and physiological vegetation indices based on unmanned aerial vehicle (UAV) images and field-spectrometer data. A high concentration of herbicide was sprayed at the different growth stages of garlic to process crop stress, the above ground dry matter of garlic at experimental area (EA) decreased about 46.2~84.5% compared to that at control area. The structural vegetation indices clearly responded to these crop damages. Spectral reflectance at near-infrared wavelength consistently decreased at EA. Most biochemical vegetation indices reflected the crop stress conditions, but the meaning of physiological vegetation indices is not clear due to the effect of vinyl mulching. The difference of the decreasing ratio of vegetation indices after the herbicide spray was 2.3% averagely in the case of structural vegetation indices and 1.3~4.1% in the case of normalization-based vegetation indices. These results meant that appropriate vegetation indices should be utilized depending on the types of crop stress and the cultivation environment and the normalization-based vegetation indices measured from the different spatial scale has the minimized difference.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.16 no.4
• /
• pp.85-99
• /
• 2021

Due to the continuous unemployment problem, the number of jobs is gradually decreasing, and entrepreneurship is emerging as an alternative. This is because, despite the government operating various start-up support programs to build a start-up-friendly culture, young entrepreneurs cannot endure the valley of death and disappear. Therefore, through this study, we intend to provide implications by analyzing the impact on Entrepreneurial satisfaction, which is essential for continuously running a business, and life satisfaction, which can act as a social awareness. This study was conducted with 573 non-wage workers who belonged to the founders among the participants of the 'College Graduation Occupational Migration Path Survey(GOMS)' survey provided by the Korea Employment Information Service. In order to analyze the relationship between entrepreneurial competency and job fit, Entrepreneurial satisfaction, and life satisfaction, the analysis was conducted using the SPSS 23.0 program. The main research results are summarized as follows. First, entrepreneurial competency has a positive effect on Entrepreneurial satisfaction and life satisfaction. Second, job fit indicates a moderating role in the relationship between entrepreneurial competency and Entrepreneurial satisfaction. Third, start-up satisfaction appears to have a partial mediating role in the relationship between entrepreneurial competency and life satisfaction. Fourth, as a result of analyzing the difference between groups according to the type of start-up(single/partnership), the group that worked together showed higher Entrepreneurial satisfaction and life satisfaction. The main implications of this study are: First, in order to increase the Entrepreneurial satisfaction and life satisfaction of university graduates who are the subject of the study, it will be necessary to design a program that can diagnose and enhance the entrepreneurial competency of students at the university level. Second, entrepreneurial competency is a basic intrinsic factor that founders must have, and it should act as an important evaluation factor when selecting founders for support programs from start-up support organizations as well as founders. Third, it is necessary to maintain mutual trust by documenting problems (positions, wages, management rights, distribution of profits, etc.) that may occur in joint ventures with objective data. Fourth, it is necessary to establish an environment in which the MZ generation, armed with the challenging spirit and creativity, can continue to take on challenges even if they fail.

• Journal of Wetlands Research
• /
• v.23 no.4
• /
• pp.317-326
• /
• 2021

The present study was carried out with a view to understand the distribution and ecology of Clihton retropictus (Martens, 1879), a class II endangered wildlife designated and protected by the Ministry of Environment, Republic of Korea, and to suggest the effective conservation and management measures for this species and its habit. First, the distribution of Clihton retropictus was investigated nationwide, and environmental factors such as salinity and substratum were analyzed in consideration of the ecological characteristics of this species. In addition, the individual size, density, and movement of Clihton retropictus per each district surveyed were analyzed. Due to its nature of inhabiting in the brackish water zone, the analysis showed that the salinity of this species was 0.7 ~ 16.6‰ at low tide and 1.0 ~ 17.3% at high tide. It was learned from the analysis of substratum that its composition in each river under investigation was slightly different, but most of substratum had a higher composition ratio than gravel (pebble, 16 ~ 64 mm). On the other hand, the size of each individual was checked by measuring the length of its diameter, and there was almost no change in the individual when the inhabited range of Clihton retropictus was short. However, there was tendency that the longer the habitat range, the bigger the individual size. From surveying the population density by season, it was made clear that, during the summer (July to August) and fall (September to October), the density was relatively higher while the number of individuals decreased significantly during winter (November to December) when the water temperature was lowered. In an effort to effectively establish conservation and management measures, the moving distance was measured, and it became known that, during the surveys in summer and fall when the individuals were active, the individuals moved in more distances than during the winter survey. The results of this study are expected to be utilized as basic data for establishing effective management plans such as creation of habitats for Clihton retropictus, its migration projects and selection of migration destinations which get unavoidable due to development projects.