• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.3
• /
• pp.437-442
• /
• 2021

This study describes the design and implementation of power supply of dehop/rehop transponder of EQM(Engineering Qualification Model). We materialized the interface of the PLDIU and power supply of a satellite bus, and minimized the potential for the occurrence of such erroneous operation circuit ESD through the WCA of the space environment. We designed a reliable power supply through simulation for TID about space radiation and simulation of the vibration generated during it launched, and we confirmed that it satisfies the environmental test specification through the test space environment after production.

• Korean Journal of Soil Science and Fertilizer
• /
• v.46 no.6
• /
• pp.610-614
• /
• 2013

Massive intercalation of urea into montmorillonite (MUCH) was recently proposed to enhance urea use efficiency through smart suppression of emission of $NH_3$ and NOx. This study was to synthesize citrate-incorporated MUCH (Cit-MUCH) which can enhance suppression of $NH_3$ volatilization. The XRD pattern of Cit-MUCH was very similar to that of MUCH to indicate successful incorporation of citric acid into MUCH. Incorporation of citric acid was confirmed by the existence of $COO^-$ symmetric stretching vibration. During the initial 4 days after application, $NH_3$ volatilization from both bare and perilla-planted soils was much more suppressed by application of Cit-MUCH than MUCH. A peak volatilization rate decreased from 28.3 N mg $m^{-2}\;h^{-1}$ of MUCH-broadcasted soil to 22.2 N mg $m^{-2}\;h^{-1}$ of Cit-MUCH-broadcast soil. $NH_3$ volatilization was less in planted soil than bare soil for 72 hrs after application. These results showed that incorporation of citric acid led to increase in suppression of ammonia volatilization from urea-applied soils.

• Journal of the Society of Disaster Information
• /
• v.18 no.3
• /
• pp.478-486
• /
• 2022

Purpose: Although the working environment is measured at the construction site, only a few noise and vibration that are typically exposed for each process are performed without measuring the working environment by segmenting the exposed harmful factors. Therefore, it is intended to find the harmfulness of silicon oxide dust, which is most exposed at construction sites, and the complementary points of improvement measures currently being implemented at construction sites. Method: The status was analyzed using the actual condition survey report issued by the Korea Occupational Health Corporation and the Korea Occupational Health Association and data from the work environment measurement institution, and compared and analyzed with the rules on work environment measurement of the Occupational Safety and Health Act. Result: The harmfulness of silicon oxide dust was identified and improvement measures were derived. Conclusion: It is expected that occupational diseases against silicon dust can be reduced if the harmfulness of silicon oxide dust at construction sites is derived and improvement measures are actively applied at the site.

• Aerospace Engineering and Technology
• /
• v.4 no.2
• /
• pp.203-208
• /
• 2005

Electronic components for space launch vehicles are exposed to a severe vibrational environment at launch and flight. The structural reliability of each component can be verified using mathematical approaches. In order to verify the structural reliability, an important parameter is the natural frequency of PCB(Printed Circuit Board) assembly mounted electronic components on and housing mounted PCB assembly in. In this paper, in order to find natural frequencies of PCB assemblies and the housing of hydrazine TCU(Thruster Control Unit), FEM(Finite Element Method) is adapted. The analytical result of FEM is verified by experimental method.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.611-614
• /
• 2005

The introduction of the sound based on the soundscape concept has the effect to offer comfortable sound environments at the public spaces by masking undesired ones and to identify the spaces. Sound installation, sound sculptor and the soundscape are used for these purpose, but the most important factors to be considered therein are to determine what kind of sounds to offer and how to adjust them to the changing circumstances. But, installing, maintaining and adjusting the soundscape system directly in the field will ensue numerous problems as well as high costs. And, even if it was epochal and novel when the soundscape is first installed at a space, new different sound environment is necessary to continue the effectiveness as time goes. Thus, this study aims at devising the instrument system that has the artificial intelligence, enables to remote control, with a great ease, numerous variables, reproduce most agreeable sound sources, and can produce the proper sound fit to the space automatically and spontaneously.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.535-540
• /
• 2005

In environmental impact assessment, noise impact assessment usually consists of three stages surveying the existing noise levels by measurements, predicting noise levels induced by construction works and predicting noise levels after the completion of project. When predicting noise level in urban area, this method does not consider acoustic phenomena like multi reflection, diffraction and absorption due to complex topographic configuration of building and terrains. For the purpose, a noise mapping tool is utilized to produce a series of noise maps, which are those for the present, for the works of construction and for the future. For accurate noise mapping, acoustical and topographic information is essential. Standard sound power levels and directivities of various construction equipments are required and scheduling of construction processes and locations of the equipments should be provided. In the case of exceeding legal limit, mitigation measures are applied to satisfy the legal limits and subsequent noise map is obtained and checked.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.962-965
• /
• 2005

A high intensity progressive wave tube is installed at Korea Aerospace Research Institute (KARI) for acoustic environmental tests. The test facility has 700 mm x 800 mm cross-sectional area, and provides acoustic environment of 165 dB over the frequency range of $25Hz{\sim}10,000Hz$. The facility consists of a 6 m long acoustic wave tube, acoustic power generation systems, gases nitrogen supply systems, and acoustic control systems. This paper describes how the basic parameters of the facility and power generation systems are controlled to meet the requirement of the test. The shape and length of the tube has been designed by using the size of test objects and the wave propagation characteristics of the tube. The capacity of acoustic power generation systems is determined by the energy conversion of acoustic wave and the efficiency of acoustic modulators. Moreover, the paper introduces test run results of the tube. Overall of 163dB has been generated by using the test facility.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.488-492
• /
• 2007

Since Equipment-Noises occurring in machine room penetrate wall-body and travel to the adjacent room in the form of air-borne sound and structure-borne sound, it is appearing as the main factor that injures a peaceful residential environment, and due to this, such noise-damage is currently increasing rapidly. Consequently, despite the measures for sound-insulation and soundproof against the equipment-noise penetrated wall-body is urgently required, but as the subjective evaluation considered for psychological response about the equipment-noise was not practiced, many dissatisfactions are still raising even after some measure was taken. On such point of view, this Research, at the spot, has actually measured the equipment-noise that had permeated various wall-bodies, and examined its physical characteristics, thence based upon this, has conducted Psycho-Acoustics Experiment and investigated the interrelation between the physical evaluation value and psychological reaction value. It is considered that such study result could be utilized as the useful material at the time of establishment of the Grading Standard for the insulation performance against the Architectural Plumbing Noise, in the future.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.231-235
• /
• 2007

Stone Industry in our country is classified mainly in view of supply of raw materials ingredients, as follows: Stone-Quarrying Industry who develops the natural resources, Stone Processing Industry who processes the quarried raw ore into construction materials and stone-products, Stony Mountain-Aggregate Industry who supplies the elementary raw materials ingredients to construction section, respectively. Among them, while Stone Processing Industry sells its turnover around billion-Won level per annum per a company, most of other job sites are paltry, adopting less than 10 employees, and it is real state that their working environments are also very coarse. The Noise originated from processing-instrument which generates at such Stone Processing Industry is as so repeatedly reiterating Loud Noise that most of the spot workers are forcedly imposing such dangers as the severe unpleasant feeling and hearing impairments. On this viewpoint, this Research is now analyzing on the frequency characteristics with regard to the Noise that generated from various processing-instruments, and then based on this, in order to grasp the influence of the Loud Noise generating when process the stone materials, this study has ever evaluated it with PSIL and NR. It is considered that such data could be used as the valuable material for establishment of a comfortable working environment hereafter.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.28-32
• /
• 2007

While various methods for sound source localization have been developed, most of them utilize on the time difference of arrival (TDOA) between microphones or the measured head related transfer functions (HRTF). In case of a real robot implementation, the former has a merit of light computation load to estimate the sound direction but can not consider the effect of platform on TDOAs, while the latter can, because characteristics of robot platform are included in HRTF. However, the latter needs large resources for the HRTF database of a specific robot platform. We propose the compensation method which has the light computation load while the effect of platform on TDOA can be taken into account. The proposed method is used with spherical head related transfer function (SHRTF) on the assumption that robot platform, for example a robot head, installed microphones can be modeled to a sphere. We verify that the proposed method decreases the estimation error caused by the robot platform through the simulation and experiment in real environment.