• 제목/요약/키워드: Environment Function Development

검색결과 1,216건 처리시간 0.028초

경상도 지역 삼나무의 지위지수 곡선 개발 및 비교 검정 (Development of Site Index Curves and Comparison with National Scale for Cryptomeria japonica in Gyeongsang-do)

  • 박희정;최석원;고병준;이상현
    • 한국산림과학회지
    • /
    • 제110권4호
    • /
    • pp.658-664
    • /
    • 2021
  • 본 연구는 경상도 지역에 생육하는 삼나무의 지위지수 곡선을 개발하고, 국가수준 삼나무 지위지수 곡선, 전라도 지역 삼나무 지위지수 곡선과의 비교 검정을 통하여 경상도 지역의 지역적 특성을 반영한 정도 높은 지위지수 곡선을 개발함에 목적이 있다. 경상도 지역에 생육하는 삼나무 552본을 대상으로 Chapman-Richards 식, Schumacher 식, Gompertz 식으로 수고생장모델을 개발한 뒤 가장 적합한 모델인 Gompertz 식으로 지위지수 곡선을 개발하였으며, 비교 검정은 유의수준 5%에서 F 검정과 그래프를 이용하여 분석하였다. 검정 결과, 국가수준 삼나무, 기준임령 이전 전라도 지역 삼나무와의 비교는 p-value가 0.05 이상으로, 통계적으로 유의한 차이가 없는 것으로 분석되었으며, 기준임령 이후 전라도 지역 삼나무와의 비교는 p-value가 0.05 이상으로 통계적으로 유의한 차이가 있는 것으로 분석되었다. 따라서, 경상도 지역 삼나무를 국가수준 삼나무, 기준임령 이전 전라도 지역 삼나무 지위지수 곡선에 준용하는 것은 가능하며, 기준임령 이후 전라도 지역 삼나무 지위지수 곡선에 적용하는 것은 불가능한 것으로 분석되었다. 본 연구를 통해 개발한 경상도 지역 삼나무 지위지수를 활용하여, 경상도 지역의 삼나무 임분에 대한 산림경영체계의 기초자료 제공 및 지역적 특성을 반영한 정도 높은 현장 적용력을 통한 경영자의 목적에 맞는 체계적·합리적인 경영이 가능하다고 판단된다.

무인차량 원격주행제어 신뢰성 향상을 위한 통합 시뮬레이터 구축에 관한 연구 (A Study on the Development of Driving Simulator for Improvement of Unmanned Vehicle Remote Control)

  • 강태완;박기홍;김준원;김재관;박현철;강창근
    • 한국산학기술학회논문지
    • /
    • 제20권6호
    • /
    • pp.86-94
    • /
    • 2019
  • 본 논문은 보다 높은 실재감과 안전성을 확보하기 위한 무인차량 원격주행제어 환경 개발에 대한 내용을 설명한다. 주로 무인차량 원격주행제어를 위한 환경은 조이스틱 형태의 장치를 활용하여 조향과 가/감속이 가능하도록 개발되어 사용되었다. 그 외 일반 차량처럼 간이 조향-휠(steering-wheel)을 기반으로 개발된 시뮬레이터 환경도 있으나, 현재 주행 상황을 피드백하는 기술이 적용되어 있지 않거나 가/감속부를 포함하지 않는 것이 대부분이다. 피드백 기술이란 일반 차량을 직접 운전할 때 조향-휠과 가/감속 페달을 통해 느껴지는 현재 주행 상황을 시뮬레이터 환경에 구현하는 것을 의미한다. 이렇듯 무인차량 원격주행제어에 이질감을 감소시키는 피드백 기술 개발과 더불어 실재감을 높일 수 있는 시뮬레이터 환경 구축이 필수적이다. 따라서 본 연구에서는 선행 연구를 통해 개발된 힘반향 햅틱제어 기술을 적용할 수 있는 시뮬레이터 환경을 구축하고 시뮬레이터 하드웨어의 최소 요구사양을 도출하는 연구를 수행하였다. 하드웨어 구성은 일반 차량과 유사한 조향-휠 모듈과 가/감속 페달 모듈로 구성하였으며, 조향부와 가/감속부 모두 피드백 기술을 적용할 수 있도록 별도의 액추에이터를 설치하였다. 또한 제어부 PC를 통해 두 가지 조작부에 피드백 명령을 전달할 수 있도록 CAN(controller area network) 통신 환경을 구성하였다. 이렇게 구성한 시뮬레이터 환경의 성능을 검증하기 위하여 기 개발된 힘반향 햅틱제어 알고리즘을 직접 적용하여 각 상황 별 알고리즘 동작을 평가하였다.

스마트 관광 활성화를 위한 트립어드바이저 애플리케이션 리뷰 분석 : 토픽 모델링을 중심으로 (Analyzing TripAdvisor application reviews to enable smart tourism : focusing on topic modeling)

  • 이유나;한무명초;유선영;소미기;노미진
    • 스마트미디어저널
    • /
    • 제12권8호
    • /
    • pp.9-17
    • /
    • 2023
  • 정보통신의 발달과 스마트 기기의 발전 및 보급 향상은 관광 형태의 변화를 야기하였고, 이후 스마트 관광이라는 개념이 등장하였다. 이에 스마트 관광 정책 및 설문에 관한 연구가 진행되고 있으나 애플리케이션 리뷰에 관한 연구는 미비한 편이다. 본 연구는 구글 플레이 스토어 내 스마트 관광 분야의 대표적인 애플리케이션인 트립어드바이저 애플리케이션 리뷰 데이터를 수집하여 LDA(Latent Dirichlet Allocation) 토픽 모델링을 통해 사용 용도와 사용자 만족을 파악하고자 한다. 분석 결과 4개의 토픽이 도출되었으며 2개의 토픽에서는 긍정적인 평가를 나머지 2개의 토픽에서는 부정적인 평가를 하고 있었다. 사용자들은 해당 애플리케이션의 숙박 및 관광 명소 추천 시스템에 만족하고 있음을 알 수 있었으며 검색 시 설정한 필터가 적용되지 않거나 업데이트 후 리뷰가 게시되지 않음에 불편을 겪고 있음을 알 수 있었다. 이에 다양한 추천 카테고리를 애플리케이션에 추가하여 사용자에게 다양한 경험을 제공하는 것이 만족도 향상에 도움이 될 것으로 기대된다. 또한 필터 기능을 포함한 애플리케이션 문제를 파악하여 애플리케이션 환경 점검과 해당 기능 오류 개선을 한다면 사용자 만족도를 향상시킬 수 있을 것으로 기대된다.

國土管理의 方向定立을 위한 國土診斷 -專門家 集團의 問題意識을 中心으로- (Spatial problems of Korea -A delphi survey-)

  • 김인;류우익;허우긍;박영한;박삼옥;류근배;최병선
    • 대한지리학회지
    • /
    • 제29권1호
    • /
    • pp.16-38
    • /
    • 1994
  • 본 연구는 국토관리의 기본방향을 정립하기 위한 기초 연구로서 국토 전반에 걸쳐 문제의 현 상황을 파악하고자 하였다. 이를 위해 국토문제에 관심을 가지는 전문가 집단을 대상으로 국토정책, 취락계층별 문제, 정책 및 전략평가, 당면 지역문제, 국토환경, 북한에 대한 평가 등에 대한 델파이 조사를 행하였으며, 문헌조사도 병행하였다. 국토의 전체적인 수준은 소비, 주거, 노동 환등을 영위하는데 대체로 만족하나, 교육, 휴양, 공동 생활 등의 부문에서는 상대적으로 미흡하다고 평가되었다. 국토구조의 핵심문제로 공간적 집중과 격차 를 생각하고 있었으며, 토지이용의 기본방향에 대해서는 개발과 보전을 적절히 절충하자는 의견이 제시되었다. 국토 환경 수준에 대해서는 대체로 낮게 평가하고, 정부의 환경관리 정 책에 대해서도 비판적이었다. 한편 취락계층별로 상이한 공간문제를 갖고 있는 것으로 조사 되었다. 북한지역은 국토기반시설이 취약하지만 환경의 질은 양호한 것으로 인식되었다. 국 토의 바람직한 미래상으로는 "건강한 국토"를 제안하며, 그 기본원리로는 미래지향적 국토 관리, 국토의 일체성 회복, 국토구조의 진취적 개편, 국토이용에 있어서의 공공성 확보, 국토 관리 패러다임의 친환경적 전환 등이 요구된다.

  • PDF

인터넷을 이용한 수업에서 패킷캡쳐를 통한 사이트 접속 제한 (Access Restriction by Packet Capturing during the Internet based Class)

  • 이중철;이용진
    • 대한공업교육학회지
    • /
    • 제32권1호
    • /
    • pp.134-152
    • /
    • 2007
  • 본 연구는 인터넷을 이용한 수업에서 학생들이 수업과 관련되지 않은 웹 사이트에 접속하는 것을 교사용 컴퓨터에서 발견하여 차단함으로써 수업의 효율성을 높이고, 교사가 의도하는 방향으로 수업을 진행할 수 있는 프로그램의 개발에 목적이 있다. 본 연구의 결과를 이용하면 수업과 관련되지 않은 웹 사이트에 접속하는 것을 방지하기 위하여 랜(LAN) 전원을 차단하고 수업하는 기존의 방법 대신 교수 매체로서 인터넷을 효과적이고 안전하게 사용할 수 있다. 관련 연구는 한 개의 호스트(host)만 감시하고 접속을 차단하는 반면에 본 연구에서 개발한 프로그램은 접속해 있는 모든 호스트들을 감시하고 차단할 수 있다. 본 연구에서 제안한 프로그램은 소규모 네트워크 환경에 설치된 리눅스(linux) 운영체제에서 개발되었다. 개발된 프로그램은 5가지 기능을 포함하고 있다. 도메인 네임(domain name)에서 IP(internet protocol) 주소로 변환하여 파일로 저장하는 변환 기능, 인터넷을 사용할 준비가 되어 있는 학생 컴퓨터를 탐색하여 파일로 저장하는 탐색기능, 패킷(packet)을 캡쳐(capture)하여 패킷의 정보를 표현해주는 패킷 캡쳐 기능, 캡쳐된 패킷 정보와 차단 목록 데이터를 비교하는 비교기능, 그리고 차단 목록과 캡쳐된 패킷 정보가 일치할 경우 네트워크 접속을 차단하는 기능으로 구성되어 있다. 개발된 프로그램을 사용하면 네트워크를 통과하는 모든 패킷(packet)을 실시간에 정확하게 캡쳐 할 수 있고, 불량 사이트에 학생이 접근하는 경우 교사의 컴퓨터 화면에 관련 내용이 표시된다. 따라서 교사는 관련 내용을 실시간으로 확인하고, 불량 사이트에 대한 접속을 차단할 수 있다. 본 연구에서 개발된 프로그램은 초 중등학교와 같은 소규모 네트워크에 적용가능하며, 교사와 학생, 학교차원의 수업 관리와 컴퓨터 실습실 관리의 효율성을 향상시킬 것이다.

발달장애의 수예공작 프로그램 필요성에 관한 고찰 (A Look at the Need for a Crafts program of Developmental Disabilities)

  • 김남순;김동현;김희정
    • 대한지역사회작업치료학회지
    • /
    • 제1권1호
    • /
    • pp.79-89
    • /
    • 2011
  • 환경적 오염 및 산업화 등으로 인한 직 간접적인 문제는 장애인, 급 만성질환자 등의 수를 증가시키는 요인이 된다. 이로 인해 발생하는 장애아동의 수도 성인과 비슷한 비율로 매년 증가하고 있다 특히, 발달장애는 전체 아동의 약 5~10%정도에서 발생되는 높은 유병률을 보이고 있다. 발달장애 아동에게 적용하는 치료로는 작업치료, 물리치료, 언어치료, 심리치료, 미술치료 등이 있다. 시지각이란 시각 기관을 통해 외부환경을 인지하는 기능으로 일상생활에서 일어나는 대부분의 행동들이 시지각과 연관된다. 그러나 발달장애 아동은 충분한 시지각의 발달이 이루어지지 않기 때문에 일상과제 수행 면에 많은 영향을 초래하게 된다. 이러한 이유로 아동 작업치료 영역에서 시지각에 대한 평가와 치료에 관한 이해는 매우 중요하다고 할 수 있다. 시지각 기능을 향상시키기 위한 다양한 치료 방법 중에는 감각통합 훈련, 시지각 훈련 프로그램, 수예공작 프로그램 등이 있다. 특히, 수예공작은 주로 손을 사용하여 무엇인가를 만드는 대표적인 활동으로 누구에게나 적용할 수 있다. 뇌에 관한 연구가 활발해지면서 수예공작 활동을 통해 뇌기능을 사용하고 그 기능에 도움을 줄 수 있음이 증명되었으며, 소근육운동 또는 세밀하고 정확한 움직임을 필요로 하는 활동을 수행할 때 시지각 기술이 기반이 되기 때문에 수예공작을 통한 손 기능의 반복적인 사용은 두뇌기능을 발달시켜 시지각 기능 향상에 기여할 것임을 기대 할 수 있다. 이것은 수예공작이 분명한 치료적 가치가 있음을 시사한다. 또한 작업치료 영역에서 시지각의 발달과 시지각의 장애에 대한 중재가 큰 영역을 차지함에도 불구하고 그에 대한 연구가 매우 부족하다. 따라서 본 연구에서는 학위논문의 타당성 검증을 위한 사전연구로서 발달장애 아동의 수예공작 프로그램 수행의 필요성을 소고하고자 한다.

  • PDF

미세먼지 저감을 위한 그린인프라 계획요소 도출 - 텍스트 마이닝을 활용하여 - (Derivation of Green Infrastructure Planning Factors for Reducing Particulate Matter - Using Text Mining -)

  • 석영선;송기환;한효주;이정아
    • 한국조경학회지
    • /
    • 제49권5호
    • /
    • pp.79-96
    • /
    • 2021
  • 그린인프라 계획은 미세먼지 저감을 위한 대표적인 조경 계획 방안 중 하나이다. 이에, 본 연구에서는 미세먼지 저감을 위한 그린인프라 계획 시 활용될 수 있는 요소를 텍스트 마이닝 기법을 활용하여 도출하고자 하였다. 미세먼지 저감계획, 그린인프라 계획 요소 등의 키워드를 중심으로 관련 선행연구, 정책보고서 및 법률 등을 수집하여 텍스트 마이닝을 통해 단어 빈도-역 문서 빈도(Term Frequency-Inverse Document Frequency, 이하 TF-IDF) 분석, 중심성 분석, 연관어 분석, 토픽 모델링 분석을 실시하였다. 연구결과, 첫째, TF-IDF 분석을 통해 미세먼지 및 그린인프라와 관련된 주요 주제어는 크게 환경문제(미세먼지, 환경, 탄소, 대기 등), 대상 공간(도시, 공원, 지역, 녹지 등), 그리고 적용 방법(분석, 계획, 평가, 개발, 생태적 측면, 정책적 관리, 기술, 리질리언스 등)으로 구분할 수 있었다. 둘째, 중심성 분석 결과, TF-IDF와 유사한 결과가 도출되었으며, 주요 키워드들을 연결하는 중심단어는 '그린뉴딜', '유휴부지'임을 확인할 수 있었다. 셋째, 연관어 분석 결과, 미세먼지 저감을 위한 그린인프라 계획 시, 숲과 바람길의 계획이 필요하며, 미기후 조절의 측면에서 수분에 대한 고려가 반드시 필요한 것으로 확인되었다. 또한, 유휴공간의 활용 및 혼효림의 조성, 미세먼지 저감 기술의 도입과 시스템의 이해가 그린인프라 계획 시 중요한 요소가 될 수 있음을 확인할 수 있었다. 넷째, 토픽 모델링 분석을 통해 그린인프라의 계획요소를 생태적·기술적·사회적 기능을 중심으로 분류하였다. 생태적 기능의 계획요소는 그린인프라의 형태적 부분(도시림, 녹지, 벽면녹화 등)과 기능적 부분(기후 조절, 탄소저장 및 흡수, 야생동물의 서식처와 생물 다양성 제공 등), 기술적 기능의 계획요소는 그린인프라의 방재 기능, 완충 효과, 우수관리 및 수질정화, 에너지 저감 등, 사회적 기능의 계획요소는 지역사회 커뮤니티 기능, 이용객의 건강성 회복, 경관 향상 등의 기능으로 분류되었다. 이와 같은 결과는 미세먼지 저감을 위한 그린인프라 계획 시 리질리언스 및 지속가능성과 같은 개념적 키워드 중심의 접근이 필요하며, 특히, 미세먼지 노출 저감의 측면에서 그린인프라 계획요소의 적용이 필요함을 시사한다고 볼 수 있다.

Perspective of breaking stagnation of soybean yield under monsoon climate

  • Shiraiwa, Tatsuhiko
    • 한국작물학회:학술대회논문집
    • /
    • 한국작물학회 2017년도 9th Asian Crop Science Association conference
    • /
    • pp.8-9
    • /
    • 2017
  • Soybean yield has been low and unstable in Japan and other areas in East Asia, despite long history of cultivation. This is contrasting with consistent increase of yield in North and South America. This presentation tries to describe perspective of breaking stagnation of soybean yield in East Asia, considering the factors of the different yields between regions. Large amount of rainfall with occasional dry-spell in the summer is a nature of monsoon climate and as frequently stated excess water is the factor of low and unstable soybean yield. For example, there exists a great deal of field-to-field variation in yield of 'Tanbaguro' soybean, which is reputed for high market value and thus cultivated intensively and this results in low average yield. According to our field survey, a major portion of yield variation occurs in early growth period. Soybean production on drained paddy fields is also vulnerable to drought stress after flowering. An analysis at the above study site demonstrated a substantial field-to-field variation of canopy transpiration activity in the mid-summer, but the variation of pod-set was not as large as that of early growth. As frequently mentioned by the contest winners of good practice farming, avoidance of excess water problem in the early growth period is of greatest importance. A series of technological development took place in Japan in crop management for stable crop establishment and growth, that includes seed-bed preparation with ridge and/or chisel ploughing, adjustment of seed moisture content, seed treatment with mancozeb+metalaxyl and the water table control system, FOEAS. A unique success is seen in the tidal swamp area in South Sumatra with the Saturated Soil Culture (SSC), which is for managing acidity problem of pyrite soils. In 2016, an average yield of $2.4tha^{-1}$ was recorded for a 450 ha area with SSC (Ghulamahdi 2017, personal communication). This is a sort of raised bed culture and thus the moisture condition is kept markedly stable during growth period. For genetic control, too, many attempts are on-going for better emergence and plant growth after emergence under excess water. There seems to exist two aspects of excess water resistance, one related to phytophthora resistance and the other with better growth under excess water. The improvement for the latter is particularly challenging and genomic approach is expected to be effectively utilized. The crop model simulation would estimate/evaluate the impact of environmental and genetic factors. But comprehensive crop models for soybean are mainly for cultivations on upland fields and crop response to excess water is not fully accounted for. A soybean model for production on drained paddy fields under monsoon climate is demanded to coordinate technological development under changing climate. We recently recognized that the yield potential of recent US cultivars is greater than that of Japanese cultivars and this also may be responsible for different yield trends. Cultivar comparisons proved that higher yields are associated with greater biomass production specifically during early seed filling, in which high and well sustained activity of leaf gas exchange is related. In fact, the leaf stomatal conductance is considered to have been improved during last a couple of decades in the USA through selections for high yield in several crop species. It is suspected that priority to product quality of soybean as food crop, especially large seed size in Japan, did not allow efficient improvement of productivity. We also recently found a substantial variation of yielding performance under an environment of Indonesia among divergent cultivars from tropical and temperate regions through in a part biomass productivity. Gas exchange activity again seems to be involved. Unlike in North America where transpiration adjustment is considered necessary to avoid terminal drought, under the monsoon climate with wet summer plants with higher activity of gas exchange than current level might be advantageous. In order to explore higher or better-adjusted canopy function, the methodological development is demanded for canopy-level evaluation of transpiration activity. The stagnation of soybean yield would be broken through controlling variable water environment and breeding efforts to improve the quality-oriented cultivars for stable and high yield.

  • PDF

정식 후 초기 생장기 배추의 생장, 광합성 속도 및 기공전도도에 미치는 토양수분의 영향 (Effect of Soil Water Content on Growth, Photosynthetic Rate, and Stomatal Conductance of Kimchi Cabbage at the Early Growth Stage after Transplanting)

  • 김성겸;이희주;이희수;문보흠;이상규
    • 생물환경조절학회지
    • /
    • 제26권3호
    • /
    • pp.151-157
    • /
    • 2017
  • 본 연구는 정식 후 토양의 수분 함량에 따른 배추의 생장과 토양 수분에 따른 배추의 생리 반응 모델 개발을 위한 유효 매개변수를 알아보고자 수행되었다. 처리는 5개 수준으로 각각 0, 200, 300, 400 및 500mL/d/plant로 매일 1회 관수하여 토양 수분 함량 차이로 구분하였다. 토양수분과 기공전도도를 정식 후 10일부터 6일 간격으로 총 5회 측정하였으며(단, 0과 200mL/d/plant 처리구는 총 3회 측정), 광합성기구 활성을 알아보고자 정식 후 25일에 충분히 관수된 처리구(500mL/d/plant)와 결핍 처리구(0mL/d/plant)에서 이산화탄소 포화 곡선을 작성하였고, 정식 후 38일에 생장을 조사하였다(단, 관수량 처리구 0과 200mL/d/plant는 위조되어 정식 후 29일에 생장 조사함). 토양수분과 배추의 기공전도도는 밀접한 관계가 있었으며($r^2=0.999$), 직선의 정의 상관관계로 y = 6097.4x - 4.2984였다. 충분히 관수된 배추의 이산화탄소 포화곡선은 정상적인 포화 곡선을 보였으나, 토양수분이 극도로 결핍된 배추는 체내로 이산화탄소가 확산되어 들어가지 않으며, 광합성 속도도 약 $6.5{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ 미만으로 급격히 감소하였다. 충분히 관수된 처리구(500mL/d/plant)에 비하여 토양 수분 결핍구(0mL/d/plant 처리)에서는 약 6.8배 이상 건물생산량이 감소하였다. 그리고 토양의 수분 함량에 따라 엽면적 지수가 로그함수적(y = 16.573 + 3.398 ln x)으로 증가하였고, 결정 계수 $r^2=0.913$로 높은 상관 관계가 있었다. 결과적으로, 정식초기의 토양 수분 함량이 결핍되면 배추의 생장이 지연되며, 광합성 속도와 기공전도도가 낮아지는 것으로 밝혀졌다. 또한, 토양수분 함량과 배추 생장 반응 모델을 기공전도도와 엽면적 지수를 변수로 활용하면 정확도가 우수한 모델을 개발할 수 있을 것으로 기대된다.

Progress of Composite Fabrication Technologies with the Use of Machinery

  • Choi, Byung-Keun;Kim, Yun-Hae;Ha, Jin-Cheol;Lee, Jin-Woo;Park, Jun-Mu;Park, Soo-Jeong;Moon, Kyung-Man;Chung, Won-Jee;Kim, Man-Soo
    • International Journal of Ocean System Engineering
    • /
    • 제2권3호
    • /
    • pp.185-194
    • /
    • 2012
  • A Macroscopic combination of two or more distinct materials is commonly referred to as a "Composite Material", having been designed mechanically and chemically superior in function and characteristic than its individual constituent materials. Composite materials are used not only for aerospace and military, but also heavily used in boat/ship building and general composite industries which we are seeing increasingly more. Regardless of the various applications for composite materials, the industry is still limited and requires better fabrication technology and methodology in order to expand and grow. An example of this is that the majority of fabrication facilities nearby still use an antiquated wet lay-up process where fabrication still requires manual hand labor in a 3D environment impeding productivity of composite product design advancement. As an expert in the advanced composites field, I have developed fabrication skills with the use of machinery based on my past composite experience. In autumn 2011, the Korea government confirmed to fund my project. It is the development of a composite sanding machine. I began development of this semi-robotic prototype beginning in 2009. It has possibilities of replacing or augmenting the exhaustive and difficult jobs performed by human hands, such as sanding, grinding, blasting, and polishing in most often, very awkward conditions, and is also will boost productivity, improve surface quality, cut abrasive costs, eliminate vibration injuries, and protect workers from exposure to dust and airborne contamination. Ease of control and operation of the equipment in or outside of the sanding room is a key benefit to end-users. It will prove to be much more economical than normal robotics and minimize errors that commonly occur in factories. The key components and their technologies are a 360 degree rotational shoulder and a wrist that is controlled under PLC controller and joystick manual mode. Development on both of the key modules is complete and are now operational. The Korean government fund boosted my development and I expect to complete full scale development no later than 3rd quarter 2012. Even with the advantages of composite materials, there is still the need to repair or to maintain composite products with a higher level of technology. I have learned many composite repair skills on composite airframe since many composite fabrication skills including repair, requires training for non aerospace applications. The wind energy market is now requiring much larger blades in order to generate more electrical energy for wind farms. One single blade is commonly 50 meters or longer now. When a wind blade becomes damaged from external forces, on-site repair is required on the columns even under strong wind and freezing temperature conditions. In order to correctly obtain polymerization, the repair must be performed on the damaged area within a very limited time. The use of pre-impregnated glass fabric and heating silicone pad and a hot bonder acting precise heating control are surely required.