• Journal of the Korean housing association
• /
• v.19 no.3
• /
• pp.21-29
• /
• 2008

To investigate the actual conditions on the living environment of group-homes for the elderly and their living environment, 4 group-homes were surveyed. As the results, conditions of location for the group-home of the elderly looked positive, on the other hand, safety for criminal prevention, accessability and convenient facilities were not on level satisfied. The average area of each space in the group-home indicated that the bed room was $11.21\;m^2$, the living room $28.13\;m^2$, the kitchen $23.59\;m^2$, and the bath room had an integrated type of bath room and toilet $7.63\;m^2$. The physical environments of each space in the group-home were investigated, In bed room, door, windows and illumination were relatively good but safety was extremely inferior. Living room mostly looked good except the doorsill which needs refurbishment. In kitchen, cooking table, windows, illumination, ventilator were somewhat satisfactory but gas-warning device should have been installed. In addition, in bath room and toilet, location, door, window, illumination and finished material were satisfactory. But the stepped difference between the bath room and other space, safety-bar, emergency bell and floor heating system were seriously deteriorated and must be improved for the safety of the elderly. Conclusively, living environment of group-home for the elderly is mainly satisfactory but it was necessary to take a consideration for their safety.

• Korean Institute of Interior Design Journal
• /
• v.13 no.6
• /
• pp.167-174
• /
• 2004

The purpose of this study is to examinethe present illumination conditions in office environment and to suggest an efficient illumination plan in office planning process. Illumination conditions in work environment were surveyed in 6 offices to investigate whether the present illumination conditions were appropriate to the work type. The results of this study are as follows: Most of the general Illuminance level in the area of work were all at an adequate level, except one. The average Illuminance level in the all meeting rooms were met for the standard. Illuminance in the all reception area were extremely over the standard, The illuminations of this area were rather designed according to the image of the company than the standard. As for the illumination method in the area of general work, four offices used a general lighting by a direct lighting type, while two offices used a general lighting and a task lighting at the same time. This survey suggested that first, each company should consider illumination plan in the building planning process, second, illumination plan considering the type of places is needed, and third, illumination environment may be differentiated according to the work type. In conclusion, efficient illumination environment should be considered in office building planning process, especially In terms of illumination materials and methods.

• Journal of Ecology and Environment
• /
• v.30 no.2
• /
• pp.171-177
• /
• 2007

Korean rivers and their surrounding environments have been used excessively for rice production in the past and more recently for construction of urban areas to accomodate the rapidly increasing population. Affected Korean rivers experience dramatic fluctuations in their water levels and have faster currents compared with those in other countries. In order to restore more natural conditions in rivers experiencing such conditions, we employed a partial restoration method, which is designed to achieve physical and biological stability simultaneously. Concrete blocks were introduced to increase the river's physical stability during floods, and terra cottem, a soil enhancer, was used to reduce water loss due to intense heat. These interventions increased the river's ability to hold water and thereby promoted plant growth. This restoration method increased vegetation coverage and species diversity in treated areas, and changed the species composition in treated areas to more closely approximate that of the control site. These results suggest that this method is effective in restoring damaged habitats to more natural conditions.

• Journal of Korean Society for Atmospheric Environment
• /
• v.15 no.5
• /
• pp.687-696
• /
• 1999

Characteristics of four publicly-available accidental release models, ALOHA, SLAB, HGSYSTEM, and DEGADIS, are compared. These models are world-widely used and recently recommended by the Chemical Dispersion and Consequence Assessment(CDCA) Working Group of the United States as models applicable to generally broad safety-basis documentation applicatons. Four release scenarios are assumed by referring to the usage and storage conditions of toxic substances in the field as well as the USEPA model guideline(1993). Sensitivity of impact radius by varying meteorological conditions is tested in typical and worst-case meteorological conditions. The results show that ALOHA generally gives conservative estimates and the results from HGSYSTEM are sensitive to variations in meteorological conditions.

• Health Policy and Management
• /
• v.32 no.4
• /
• pp.368-379
• /
• 2022

Background: This study aimed to establish a strategy to improve the poor working environment and working conditions among long-term healthcare workers in Korea. Methods: A total of 600 questionnaires with which long-term health care workers participated in the targeted base areas of each city and province nationwide were distributed directly and 525 responses were collected and 506 responses were analyzed. Surveys, on-site field visits, and in-depth interviews were also conducted to understand the working environment as well as conditions and establish a strategy for improving the working environment among long-term healthcare workers to understand the demands of working conditions and working conditions. Results: Korean long-term care workers firstly and mostly enumerated their risk factors for ill-health when lifting or moving elderly recipients directly by hand (69.9%), followed by increased physical workload with old beds, tools, and facilities (42.3%) in the workplaces, shortage of manpower (32%), and source of infection (30%). To improve the working environment as well as conditions, Korean long-term care workers considered improving low-wage structures, ergonomic improvements to solve excessive physical loads, and increasing various bonus payments as well as implementing the salary system, positive social awareness, and increasing resting time. Of 506 responses, 92.3% replied that the long-term care insurance system for the elderly should be developed to expand publicization at the national level. Conclusion: This study proposes to improve the low-wage structure of Korean long-term care workers, automation and improvement of facilities, equipment, and tools to eliminate excessive physical loads (beneficiary elderly lifting), and reduction of night labor.

• Journal of Radiation Industry
• /
• v.6 no.1
• /
• pp.89-94
• /
• 2012

Three-dimensional network hydrogels were prepared by ${\gamma}$-irradiation of aqueous solutions of poly(vinyl alcohol) (PVA) and glycerol (Gly). Oven-drying was used to measure the gel fraction (G), hydration (H) or swelling behavior (S) of the prepared hydrogels. This study made a hypothesis that hydrogen bonds due to addition of glycerol and change of dry states such as freeze-drying (FD), room-drying (RD) and oven-drying (OD) acts on the G, H, and S. Interesting results on the hydrogen bonding effect in the prepared hydrogels are monitored at different drying conditions. The FD samples have a higher G values with increase in glycerol content as compared with the OD and RD samples. The formation of strong hydrogen bonding network among Gly molecules and hydrogel matrix was considered as the main driving force, resulting in the changes in the G, H, and S of the hydrogels under different drying conditions.

• Journal of Soil and Groundwater Environment
• /
• v.27 no.1
• /
• pp.25-30
• /
• 2022

Mackinawite (FeS), as a ubiquitous reduced iron mineral, is known as a key controller of redox reactions in anaerobic subsurface environment. The reaction of FeS with redox-sensitive toxic element such as arsenic is substantially affected by pH conditions of the given environments. In this study, the interaction of As(V) with FeS was studied under strict anaerobic conditions with various pH conditions. The pH-dependent arsenic removal tests were conducted under wide ranges of pH conditions and X-ray absorption spectroscopy (XAS) was applied to investigate the reaction mechanisms under pH 5, 7, and 9. The removal efficiency of FeS for As(V) showed the higher removal of As(V) under low pH conditions and its removal efficiency decreased with increasing pH, and no As(V) reduction was observed in 1 g/L FeS solution. However, XAS analysis indicated the reduction of As(V) to As(III) occurred during reaction between FeS and As(V). The reduced form of As(III) was particularly identified as an arsenic sulfide mineral (As₂S₃) in all pH conditions (pH 5, 7, and 9). As₂S₃ precipitation was more pronounced in pH 5 where the solubility of FeS is higher than in other pH conditions. The linear combination fitting results of XAS demonstrated that As(V) removal mechanism is concerted processes of As₂S₃ precipitation and surface complexation of both arsenic species.

• Journal of Korean Society for Atmospheric Environment
• /
• v.16 no.4
• /
• pp.351-362
• /
• 2000

To set the similarity conditions between a prototype usually in the field and its reduced-scale model is a crucial part in model tests. No technique is available to keep perfect similarity for this procedure so far. The experimental work using a wind tunnel is not exceptional. based on the field measurements, the effect of stack parameters and wind conditions on the dispersion of stack plume has been investigated in the laboratory. in this paper intensive methodology is focused on matching these similarities. Due to the limitations to keep perfect similarity conditions some simplifications are involved in common. In this study geometric conditions and kinematic conditions using Froude number and Reynolds number have been con-sidered to keep the similarity conditions required. From the tests it is found that the critical Reynolds number (Recrit) is 2,700 when the height of stack discharge is 50mm. The dispersion has a similar trend for the higher Reynolds number than the critical Reynolds number. It is also found that different Froude number does not make any significant influence for the normalized tracer gas concentrations at the recipient providing the same ratio of the wind speed to the discharge speed. No significant effect of stack diameter is observed in the normalized tracer gas concentrations with the same Frounde number. The similarity conditions therefore used in this study are reliable to simulate the conditions in prototype into the wind tunnel tests.

• Journal of Advanced Marine Engineering and Technology
• /
• v.28 no.6
• /
• pp.1000-1009
• /
• 2004

The environment friendly calcareous deposit films were formed on steel plates by electrodeposition technique in natural seawater and synthetic solutions such as dissolved $\textrm{Mg}^{2+}$ and $\textrm{Ca}^{2+}$ ions at various potential conditions. The influence of potential conditions on composition ratio, structure and morphology of the electrodeposited films were investigated by scanning electron microscopy(SEM), energy dispersive spectroscopy(EDS) and X-ray diffractor (XRD). Accordingly, this study was provided a better understanding of the composition between the growth of $\textrm{Mg(OH)}_2$ and that of $\textrm{CaCO}_3$ during the formation of calcareous deposit films on steel substrate under cathodically electrodeposition in synthetic and natural seawater. The results showed that the formation of good overall calcareous deposited film in seawater can be achieved by controlling the Ca/Mg ratio according to interfacial pH with the effective use of the electro deposition technique.

• International Journal of Concrete Structures and Materials
• /
• v.11 no.1
• /
• pp.69-84
• /
• 2017

This paper presents results of an experimental investigation on the behaviour of bond between external glass fibre reinforced polymer reinforcement and concrete exposed to three different environmental conditions, namely, temperature cycles, wet-dry cycles and outdoor environment separately for extended durations. Single shear tests (pull-out test) were conducted to investigate bond strengths (pull-out strengths) of control (unexposed) and exposed specimens. Effect of the exposure conditions on the compressive strength of concrete were also investigated separately to understand the effect of changing concrete compressive strength on the pull-out strength. Based on the comparison of experimental results of exposed specimens to control specimens in terms of bond strengths, failure modes and strain profiles, the most significant degradation of pull-out strength was observed in specimens exposed to outdoor environment, whereas temperature cycles did not cause any deterioration of strength.