• Journal of the Korean Institute of Telematics and Electronics
• /
• v.21 no.6
• /
• pp.1-6
• /
• 1984

This paper describes that the compensation of frequency dependent attenuation (F.D.A.) and faithful envelope detection using the analytic signal magnitude (A.S.M.) improve the range resolut ion in an acoustic medium. It is shown that a mean of computing the magnitude of. analytic signal is better than that of conventional A-mode. In addition, this proposed method is much easier than the above methods to detect two closely spaced interfaces on the A-mode. As the result of experiment, we obtained range resolution of 0.5 mm with transducer of 3.5 MHz. This method can be applied to medical experiment, diagonostic and nondestructive testing.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.5 no.3
• /
• pp.22-35
• /
• 1994

To improve the bandwidth efficiency in the environment of digital mobile communications, a correlative coded FM system is designed. The signal of this system has continuous phase and high power efficiency due to the constant envelope. But this signal also has a little loss of the SNR and some degradation of the BER. In this paper, a modified MLSE method which uses correlative coded signal is adopted to improve the performance of the receiver. The MLSE method improved the BER performance in the used channel. Without the decision feedback, the receiver performance was improved by 2dB and with it, by 4dB Particularly, the MLSE method and the decision feedback showed better performance in bad channels than in a stable telephone channel.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.3
• /
• pp.501-507
• /
• 1999

At the mobile unit for adaptation the propagation environment, it is necessity to adapt very fast the weight coefficient vector of adaptive array antenna In this paper, for the BPSK and BFSK signals with S/I=2, S/N=10 subband adaptive array signal processing method to the linear array antenna using the LMS & the Kalman filter algorithm is proposed. For the 4 elements equidistance linear array antenna systems LMS and Kalman algorithms with subband adaptive instruction principles using the subband signal processing method are adopted and the computer simulation results to the constant amplitude envelope signals such as BPSK or BFSK can be seen that the convergence characteristics of directional patterns and the signal following characteristics are more fast and stable.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.20 no.4
• /
• pp.505-513
• /
• 2017

Cavitation is a phenomenon caused by vapour cavities that is produced in rapid pressure changes. When the cavitation happened, the sound pressure level of a underwater radiated noise is increased rapidly. As a result, it can increase the probability of the identification or classification of a our warship's acoustic signature by an enemy ship. However, there is a problem that it is hard to precisely detect the occurrence of a cavitation noise. Therefore, this paper presents recent improvements in terms of the cavitation noise measurement by using continuous wavelet transform and DEMON(Detection of Envelope Modulation on Noise) signal processing. Then, we present that the suggested scheme is more suitable for detecting the cavitation than existing algorithms.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.4
• /
• pp.489-499
• /
• 2011

RFID technologies, which allow collecting, storing, processing, and tracking information by wirelessly recognizing the inherent ID of object through an attached electronic tag, have a variety of application areas. This paper presents a novel carrier leakage suppression RF(CLS-RF) front-end for ultra-high-frequency RF identification reader. The proposed reader CLS-RF front-end structure generates the carrier leakage replica through the nonlinear path that contains limiter. The limiting function only preserves the frequency and phase information of the leakage signal and rejects the amplitude modulated tag signal in the envelope. The carrier leakage replica is then injected into the linear path that contains phase shifter. Therefore, the carrier leakage signal is effectively cancelled out, while not affecting the gain of the desired tag backscattering signal. We experimentally confirm that the prototype shows a significant improvement in the leakage to signal ratio by up to 36 dB in 910 MHz, which is consistent with our simulation results.

• The Journal of the Acoustical Society of Korea
• /
• v.31 no.8
• /
• pp.532-541
• /
• 2012

An underwater transient signal is distinguished from an ambient noise. Database for the underwater transient signal is required since the underwater transient signal shows various characteristics depending on acoustic features. In the paper, hence, sound mask-filter was applied to extract the transient signals which exist temporally and locally in the ocean. The standard signal was chosen and cross-correlated with the raw signal. A mask-filter for a transient signal was obtained using the threshold which was decided by the maximum likelihood method in the envelope of the cross-correlated signal. Using the sound mask-filter, the transient signal of a sea catfish {Galeichthys felis (Linnaeus)} was extracted from the underwater ambient noise. Similarly, the man-made signal was added into the noise and it was extracted by the same method. We also have demonstrated the significance of the transient signal through comparing the extracted signals depending on the standard signal. In the results, the proposed method, sound mask-filtering, could be utilized as a database construction of the transient signals in underwater noise. Particularly, this study would be useful to extract the wanted signal from arbitrary signals.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.11
• /
• pp.5427-5433
• /
• 2012

In this paper a ultrasonic level meter for accurately and simply measuring oil levels of vehicle transmission is developed and its effectiveness is shown by experiments. By using a FPGA, all digital signal processes for the oil level calculation is fulfilled, and the programming on a FPGA project IDE enables very short developing time. And besides, analog circuits including a transmit/receive switch, multi-stage active filters and an envelope detect circuit are designed to process low-level ultrasonic echo signal. Under experiments, the designed level meter has proven to have the accuracy of about within 1[mm] scale.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.11a
• /
• pp.687-692
• /
• 2008

In a nuclear power plant, loose part monitoring and its diagnostic technique is one of the major issues for ensuring the structural integrity of the reactor system. Typically, accelerometers are mounted on the surface of a reactor vessel to localize impact location caused by the impact of metallic substances on the reactor system. However, in some cases, the number of the accelerometers is not enough to estimate the impact location precisely. In such a case, one of alternative plan is to utilize another type sensors that can measure the vibration of the reactor structure even though the measuring frequency ranges are different from each others. The AE sensors installed on the reactor structure can be utilized as additional sensors for loose part monitoring. In this paper, we proposed a new method to estimate impact location by using both accelerometer signal and AE signal, simultaneously. The feasibility of the proposed method is verified by an experiment. The experimental results demonstrate that we can enhance the reliability and precision of the loose part monitoring.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.21 no.1
• /
• pp.31-40
• /
• 2011

This paper examines the dynamic characteristics of a human carpal muscle through theoretical analysis and experiment. The carpal muscle was modeled as a 1-DOF vibration system and vibration response due to a ramp function force was calculated. The electromyogram signal corresponding to the muscle excitation force was measured, and the excitation force function of an envelope curve from the electromyogram signal was extracted. The ramp input function of electrical stimulation to the carpal muscle was applied by using a device for functional electrical stimulation, and the angular displacements corresponding to steady state response were measured. Theoretical calculations of the vibration response displacements were compared with the experimental results of the angular displacements, and have shown a good agreement with the result that is linearly proportional to the excitation force magnitude. As a result, the relationship between the input current of the electrical stimulation and the excitation force magnitude was inferred. The result was shown that it can be applied to develop rehabilitation training devices.

• International Journal of Aeronautical and Space Sciences
• /
• v.18 no.4
• /
• pp.688-696
• /
• 2017

This paper presents an integrated roll-pitch-yaw autopilot using an equivalent based sliding mode control for skid-to-turn nonlinear time-varying missile system with lumped disturbances in its six-equations of motion. The considered missile model are developed to integrate the model uncertainties, external disturbances, and parameters perturbation as lumped disturbances. Moreover, it considers the coupling effect between channels, the variation of missile velocity and parameters, and the aerodynamics nonlinearity. The presented approach is employed to achieve a good tracking performance with robustness in all missile channels simultaneously during the entire flight envelope without demand of accurate modeling or output derivative to avoid the noise existence in the real missile system. The proposed autopilot consisting of a two-loop structure, controls pitch and yaw accelerations, and stabilizes the roll angle simultaneously. The Closed loop stability is studied. Numerical simulation is provided to evaluate performance of the suggested autopilot and to compare it with an existing autopilot in the literature concerning the robustness against the lumped disturbances, and the aforesaid considerations. Finally, the proposed autopilot is integrated in a six degree of freedom flight simulation model to evaluate it with several target scenarios, and the results are shown.