• 제목/요약/키워드: Envelope analysis

검색결과 448건 처리시간 0.027초

Experimental investigation on flexural behaviour of HSS stud connected steel-concrete composite girders

  • Prakash, Amar;Anandavalli, N.;Madheswaran, C.K.;Lakshmanan, N.
    • Steel and Composite Structures
    • /
    • 제13권3호
    • /
    • pp.239-258
    • /
    • 2012
  • In this paper, experimental investigations on high strength steel (HSS) stud connected steel-concrete composite (SCC) girders to understand the effect of shear connector density on their flexural behaviour is presented. SCC girder specimens were designed for three different shear capacities (100%, 85%, and 70%), by varying the number of stud connectors in the shear span. Three SCC girder specimens were tested under monotonic/quasi-static loading, while three similar girder specimens were subjected to non-reversal cyclic loading under simply supported end conditions. Details of casting the specimens, experimental set-up, and method of testing, instrumentation for the measurement of deflection, interface-slip and strain are discussed. It is found that SCC girder specimen designed for full shear capacity exhibits interface slip for loads beyond 25% of the ultimate load capacity. Specimens with lesser degree of shear connection show lower values of load at initiation of slip. Very good ductility is exhibited by all the HSS stud connected SCC girder specimens. It is observed that the ultimate moment of resistance as well as ductility gets reduced for HSS stud connected SCC girder with reduction in stud shear connector density. Efficiency factor indicating the effectiveness of high strength stud connectors in resisting interface forces is estimated to be 0.8 from the analysis. Failure mode is primarily flexure with fracturing of stud connectors and characterised by flexural cracking and crushing of concrete at top in the pure bending region. Local buckling in the top flange of steel beam was also observed at the loads near to failure, which is influenced by spacing of studs and top flange thickness of rolled steel section. One of the recommendations is that the ultimate load capacity can be limited to 1.5 times the plastic moment capacity of the section such that the post peak load reduction is kept within limits. Load-deflection behaviour for monotonic tests compared well with the envelope of load-deflection curves for cyclic tests. It is concluded from the experimental investigations that use of HSS studs will reduce their numbers for given loading, which is advantageous in case of long spans. Buckling of top flange of rolled section is observed at failure stage. Provision of lips in the top flange is suggested to avoid this buckling. This is possible in case of longer spans, where normally built-up sections are used.

보철학적 교합 재구성을 위한 교합진단과 치료계획 (The Occlusal Evaluation and Treatment Planning for Prosthodontic Full Mouth Rehabilitation)

  • 이승규;이성복;최대균
    • 구강회복응용과학지
    • /
    • 제16권2호
    • /
    • pp.149-159
    • /
    • 2000
  • Occlusal disease is comparable to periodontitis in that it is generally not reversible. Occlusal disease, however, like periodontitis, often maintainable. It does itself to treatment and when restorative dentistry is utilized it becomes, in that sense, reversible. Moreover, a systematized and integrated approach will lead to a prognosis that is favorable and predictable. This approach facilitates development of optimum oral function, comfort, and esthetics, resulting in a satisfied patient. Such a systematized approach consists of four logical phase : (1) patient evaluation, (2) comprehensive analysis and treatment planning, (3) integrated and systematic reconstruction, and (4) postoperative maintenance. An integrated treatment plan is first developed on one set of diagnostic casts, properly mounted on a semiadjustable articulator using jaw relationship records. This is accomplished by using wax to make reconstructive modifications to the casts. These modified casts become the blueprint for planned occlusal changes and the fabrication of provisional restorations. The treatment goals are : (1) comfortably functioning temporomandibular joints and stomatognathic musculature, (2) adherence to the basic principle of occlusion advocated by Schuyler, (3) anterior guidance that is in harmony with the envelope of function, (4) restorations that will not violate the patient's neutral zone. This report shows the treatment procedures for a patient whose mandibular position has been altered due to posterior bite collapse. Migration of the maxillary anterior teeth had occurred, and the posterior occlusal contacts showed pathologic interference. Precise diagnosis using mounted casts was executed and prosthodontic reconstruction by the aid of an unconventional orthodontic correction on maxillary flaring was planned. An unconventional orthodontic correction can be accomplished by using preexisting natural teeth, which can be modified for use in active tooth movement or splinted together for orthodontic anchorage. This technique has an advantage over conventional fixed appliance orthodontic therapy because it can accomplish tooth movement concurrently with restorative and periodontal therapy. On occasion, minor tooth movement can be necessary to achieve the optimum occlusal scheme, crown form, and tooth position for the forces of occlusion to be displaced down the long axis of the periodontally compromised teeth. Once the occlusion, periodontal health, and crown contours for the provisional splinted restoration are acceptable, the final splinted restoration can be similarly fabricated, and it becomes an excellent orthodontic retainer.

  • PDF

완전 구강 회복술 (Full Mouth Rehabilitation)

  • 이승규;이성복;권긍록;최대균
    • 구강회복응용과학지
    • /
    • 제16권3호
    • /
    • pp.171-185
    • /
    • 2000
  • The treatment objectives of the complete oral rehabilitation are : (1) comfortably functioning temporomandibular joints and stomatognathic musculature, (2) adherence to the basic principle of occlusion advocated by Schuyler, (3) anterior guidance that is in harmony with the envelope of function, (4) restorations that will not violate the patient's neutral zone. There may be many roads to achieving these objectives, but they all convey varing degrees of stress and strain on the dentist and patient. There are no "easy" cases of oral rehabilitation. Time must be taken to think, time must be taken to plan, and time must be taken to perform, since time is the critical element in both success and failure. Moreover, a systematized and integrated approach will lead to a prognosis that is favorable and predictable. This approach facilitates development of optimum oral function, comfort, and esthetics, resulting in a satisfied patient. Such a systematized approach consists of four logical phase : (1) patient evaluation, (2) comprehensive analysis and treatment planning, (3) integrated and systematic reconstruction, and (4) postoperative maintenance. Firstly, we must evaluate the mandibular position. The results of a repetitive, unstrained, nondeflective, nonmanipulated mandibular closure into complete maxillomandibular intercuspation is not so much a "centric" occlusion as it is a stable occlusion. Accordingly, we ought to concern ourselves less with mandibular centricity and more with mandibular stability, which actually is the relationship we are trying to establish. The key to this stability is intercuspal precision. Once neuromuscular passivity has been achieved during an appropriate period of occlusal adjustment and provisionalization, subsequent intercuspal precision becomes the controlling factors in maintaining a stable mandibular position. Secondly, we must evaluate the planned vertical dimension of occlusion in relationship to what may now be an altered(generally diminished), and avoid the hazard of using such an abnormal position to indicate ultimate occlusal contacting points. There are no hard and fast rules to follow, no formulas, and no precise ratios between the vertical dimension of occlusion. Like centric relation, it is an area, not a point.

  • PDF

600°C에서 제지류 소각시 발생하는 휘발성 유기화합물 농도분석 연구 (Analysis of Volatile Organic Compounds Produced from Incineration of Papers at 600°C)

  • 이병규;조정범
    • 한국환경과학회지
    • /
    • 제11권10호
    • /
    • pp.1109-1116
    • /
    • 2002
  • 본 연구는 제지류를 소각 처리할 때 발생하는 각종 휘발성 유기화합물에 대한 배출농도를 분석하였다. 실험대상으로는 일상생활에서 다양한 용도로 사용되는 제지류를 A4용지류 (A4 새종이, A4 잉크젯, A4레이져), 신문용지류 (콩기름 신문, 일반 신문), 포장용 Box지, 서류봉투류, 일회용 종이컵류, 화장지류로 분류하였고, 분류된 제지류의 수분함량과 소각시 발생하는 휘발성 유기화합물농도와 소각 재 함량을 분석하였다. 제지류 소각시 발생되는 휘발성 유기화합물을 Furan계, Aldehyde계, Aromatic계, Aliphatic Alkene계, Aliphatic Alkane계, Chlorine계, Ketone계로 분류할 때 가장 많이 발생하는 VOCs로는 Furan계로서 전체 배출농도의 57.4%였고, 그 다음으로 Aromatic계 (22.8%), Aliphatic Alkene계 (14.9%)의 순으로 놀은 평균농도를 나타냈다. 발생되는 휘발성 유기화합물 중 이중 결합을 포함하는 화합물 (Aromatic계, Aliphatic Alkene계, Ketone 및 Aldehyde계)틀의 상대적인 배출비중은 전체 배출농도에 대해 약 40.8%로써, 제지류의 소각에서 발생되는 휘발성 유기화합물의 40% 이상이 대기 중의 오존, 광화적 산화물 및 스모그의 전구체로써 작용할 수도 있을 것이다. 연구 사용된 전체 혼합 제지류 소각시 휘발성 유기화합물중 대표적인 발암성 물질인 Benzene, dichlorornethane, chloroform도 각각 60.5 ug/g, 0.8 ug/g 및 0.1 ug/g 정도 발생될 수 있음을 볼 수 있었다. 따라서, 소형 소각로에서의 제지류의 소각시 상당량의 발암성물질도 배출되므로, 소형 소각로에서도 적절한 VOCs의 제어장치가 꼭 필요한 것으로 판단된다. 본 연구에서 사용된 10가지의 제지류가 가지고 있는 평균 수분함량은 7.2% 정도로써 일반적인 도시폐기물의 제지류 수분함량 (4.5~10%)에 속하는 결과를 보였으며, 평균 9.0 %의 소각잔재 (BottomAsh) 함유량을 보였다. 이러한 결과는 제지류를 소형 소각로에서 소각시 유해 휘발성유기화합물의 발생에도 불구하고, 적절한 대기오염 방지시설을 설치한다면 소각처리가 폐기물 부피감소 측면으로는 상당한 경제적 타당성을 가지고 있음을 암시한다.

The Effects of Pilates Exercise on Static and Dynamic Balance in the Elderly

  • Park, Ji-Hye;Lee, Joong-Sook;Yang, Jeong-Ok;Lee, Bom-Jin;Bae, Kang-Ho;Shin, Jin-Hyung
    • 한국운동역학회지
    • /
    • 제26권4호
    • /
    • pp.397-405
    • /
    • 2016
  • Objective: Pilates is a low/mid-intensity exercise that can be easily performed by elderly individuals as it is an individual body-oriented exercise. It is also a cardio workout that can be performed anywhere to develop strength and flexibility. Therefore, we investigated the effects of 8 week Pilates program on the balancing ability of elderly individuals. Method: The research participants were selected from elderly residents in B city. Ten individuals voluntarily signed an agreement to undergo free measurements as well as to participate in the workout program. (Height: $157.1{\pm}11.9cm$, Weight: $61.7{\pm}8.0kg$). The Pilates exercise was performed 60 minutes a day, three times a week for a total of eight weeks. The measurement variables used to test balance were the vestibular test, 5 m habitual and maximum walk test and 3 m tandem walk test. A series of paired t-test were conducted using IBM SPSS Statistics 23.0 to analyze all the research data collected in order to determine the balance ability of the participants before and after the Pilates program. Additionally, the statistically significant level for all analysis was set to ${\alpha}=.05$. Results: In the vestibular test, some meaningful changes were observed in the length envelope area (ENV) while standing on one foot, but there were no significant differences in the ENV, rectangle(REC), root mean square, and total length. Results also revealed that statistically significant differences existed in the 5 m habitual and maximum walk test, as well as the 3 m tandem walk test. Conclusion: To summarize the findings, the 8 week Pilates program employed in this study significantly improved the dynamic balance of the elderly participants. Thus, elderly individuals that frequent perform Pilates are expected to enjoy positive benefits such as increased balance and fewer falling accidents.

단일형 거동함수에 의한 얕은 기초의 신뢰도 해석 -임해퇴적층의 토성자료를 중심으로- (A Reliability Analysis of Shallow Foundations using a Single-Mode Performance Function)

  • 김용필;임병조
    • 한국지반공학회지:지반
    • /
    • 제2권1호
    • /
    • pp.27-44
    • /
    • 1986
  • 기초 구조물 설계에 있어서 지지력 및 압밀 침하량 산정식을 각각 단일 모우드 거동함수(perfor trance function)로 설정하여 실측된 토성자초를 확률변수로 취해서 기술류계학적 분석을 기행했다. 이 분석결과로서 얕은 기초가 파괴상태에 이르렀을 때의 신뢰도와 그 때에 거동되고 있는 설계변수치(check points)를 "Advanced first-order second moment method"로 구했다. 설계변수들 사이의 관계를 무연관-정규분포, 무상관-비정규분포, 유상관-정규분포 및 유상관-비정규분포 등의 유형 으로 분류하여 신뢰도 및 설계변수치를 비교 검토하여 얻은 주요한 결론은 다음과 같다. 1. 지지력 모우드 1) CU test 의한 점착력과 tans사이에는 약한 음상관치 있으며, 각각 대규분포 및 대수정륜 분포를 한다. 2) 신뢰지수를 2.34로 제한했을 경우, 유상관-대수정규분포 유형의 지지력은 18.6t/m2으로서 가장 낮게 되므로, 이 이외의 유형은 지반조건을 과대평가할 우려가 있다. 2. 압밀 침하량 모우드 1) 압축비(compression ratio) 및 선행 압밀응력은 각각 정규분포 및 대수정규분포를 이루며, 이들의 상관성은 연계적 독립변수로 취급해도 좋을 만큼 매우 낮다. 2) 압밀 침하량을 확정론적 방법으로 산출한 16cm보다 더 낮게 취하면, 유상관일대수정규분포류 형의 신뇌맥가 가장 낮게 평가된다. 따라서, 얕은 기초 구조물을 신뇌도나 파괴확률을 해석하는 데 있어서, 정확한 확률밀도함수로서 복잡한 수치적분에 의한 엄밀해보다는 개략적인 확률분포형태와 비교적 쉽게 얻어지는 공분산까지를 고려하면, 기초의 지반조건이 과소평가될 우려가 없다.가될 우려가 없다.의 뽕밭에 발생한 발아불량현상의 원인은 주인이 저온에 의한 동해라고 볼 수 있으며 지역적으로는 붕소결핍에 의한 발아불량현상도 적지 않았고 특히 붕소결핍이 동해피해를 가속화시켰다고 볼 수 있다.dard deviation)were estimated, and diagram which shows the relationship between mean annual maximum rainfall($$) and frequency factor for each durations were drawn. PMP was estimated by statistical method using the PMP frequency factor obtained from the diagram and statistics($$, Sn). The PMP-Duration Equation was derived from the envelope curve in order to obtain the PMP for an arbitrary duration. The isohyetal map of 24 hours PMP and PMP. DAD curve for the whole of Korea were drawn in accordance with the point PMP values.el size는 거의 차이가 없었는데, 특히 수당영화수 및 sink용량에 대한 주연효과정도는 계통에 따라 상당한 차이를 보였다. 계통의 자체경쟁정도는 출수후보다는 출수전 생식생장기간에 더욱 심하고 계통간차이도 큰 것 같았다. 일반적으로 수당sink용량이 클수록 출수전 자체경쟁정도가 심한 경향이었으나 계통에 따라서는 수당 sink용량이 작으면서 자체경쟁도가 심한 것(수원264호 등)이

  • PDF

바지락 (Ruditapes philippinarum) 의 중금속 축적에 관한 연구 (Bioaccumulation of Heavy Metals in Ruditapes philippinarum)

  • 이용석;조용훈;변인선;강세원;조은미;한연수;최상행;박홍석;고원규;안인영;정계헌
    • 한국패류학회지
    • /
    • 제22권2호
    • /
    • pp.157-165
    • /
    • 2006
  • 바지락의 중금속의 농축 방식 및 해독기작을 연구하기 위해 소화선, 소화관 및 아가미등 세 기관을 선택하여 면역조직화학적 방법, 미세구조적 연구 그리고 SEM-EDS를 사용한 MT와 중금속의 분포 양상을 지역별로 채집한 샘플과 Cd-Cu에 시간별로 노출시킨 샘플에서 각각 살펴보았다. 중금속에 의해 유도된 MT 단백질이 면역조직화학적인 방법에 의해 붉은 색으로 표지되었다. 노출시간이 길어질수록 간췌장에서는 diverticula의 외곽으로 강한 반응을 보였으며, 아가미에서는 중금속의 노출시간이 길어질수록 노출되지 않은 조직에 비해 전반적으로 더 넓은 지역에서 강하게 반응을 보였다. 간췌장과 아가미를 투과전자현미경으로 관찰한 결과 중금속(Cd) 에 더 오래 노출될수록 세포질에서 inclusion body와 중금속으로 추정되는 과립들을 다수 관찰할 수 있었으며, 핵막이 swelling 되는 현상을 관찰할 수 있었다. 또한 발달된 조면 소포체와 미토콘드리아가 관찰되었다. SEM-EDS 결과 중금속의 분포 양상이 지역별로 상당히 상이한 결과를 나타났는데, 이는 지역별로 중금속의 오염정도와 오염원이 되는 중금속의 종류가 다르기 때문으로 추측된다. 그리고 지역별로 채집한 바지락을 이용한 실험과 S와 Zn의 수치가 높게 나타나는 것으로 보아 MT가 관여하고 있음을 간접적으로 확인할 수 있었다.

  • PDF

국내 코로나바이러스감염증-19 유행 제3-4기 소아청소년 환자의 임상적 특성: 단일기관 후향적 연구 (Clinical Characteristics of Pediatric Patients With the Coronavirus Disease 2019 During the Third and Fourth Waves of the Epidemic in Korea: A Single Center Retrospective Study)

  • 문가원 ;신동현;최수한
    • Pediatric Infection and Vaccine
    • /
    • 제29권3호
    • /
    • pp.131-140
    • /
    • 2022
  • 목적: 코로나바이러스감염증-19 (coronavirus disease 2019, 코로나19) 대유행이 시작된 이후 새로운 변이 바이러스들이 지속적 출현으로 반복되는 코로나19 유행이 장기간 지속되고 있다. 본 연구는 국내 코로나19 유행 제3기와 제4기 중반까지 소아 청소년 환자의 임상적, 역학적 특성을 파악하고자 하였다. 방법: 코로나19 확진으로 입원한 18세 이하 환자의 의무기록을 후향적으로 분석하였다. 연구기간은 제3기 유행(2020년 11월 13일-2021년 7월 6일)과 제4기 유행(2021년 7월 7일-10월 31일)로 구분하였다. 결과: 총 93명이 분석에 포함되었다(제3기 33명, 제4기 60명). 제3기에 비해 제4기 환자군의 중간 연령이 유의하게 높았다(6.7세 vs. 2.8세, P=0.014). 가정 내 전파가 전체 환자의 60.2%에서 보고되었고 두 시기에서 유사하였다(69.7% vs. 55.0%, P=0.190). 전체 환자 중 87.1% (81명)가 유증상 확인자였다. 이중 12.3%는 호흡기 증상이 없었다. 후각/미각 소실은 제4기 유행 환자군에 더 많이 관찰되었다(10.7% vs. 34.0%, P=0.032). 대부분의 호흡기 감염은 상기도 감염(94.4%, 67/71)이었고 4명 환자에서 폐렴이 동반되었다. 두 유행기 동안 진단 시 바이러스 수치의 유의한 차이는 없었다. 결론: 단일기관 후향적 연구의 제한점이 있으나 국내 코로나19 유행 제3기와 제4기 중반 동안 소아청소년 환자는 대체로 경증이었고 두 시기에서 임상적 특성 차이가 관찰되었다.