• The Journal of Korean Society of Virology
• /
• v.26 no.2
• /
• pp.141-150
• /
• 1996

본 연구에서는 $CD4^+$ T 세포를 일회성으로 감염시킬 수 있고 $CD4^+$ T 세포에 HIV-1 envelope 유전자를 전달할 수 있는 바이러스 입자를 생산하는 HIV-1 complementation system을 개발하였고 이 system을 이용하여 $CD4^+$ T 세포에 선택적으로 HIV-1 envelope 당단백질을 발현시켰다. 이 system은 Gag/Gag-Pol expressor와 Env expressor로 구성되어있다. Gag/Gag-Pol expressor는 바이러스 입자 생산에 필요한 구조단백질과 기능단백질을 발현시키지만 packaging signal이 결핍되어 바이러스 입자로 유전자가 들어가지 못하도록 제조되었다. Env expressor는 Tat, Rev와 envelope 당단백질을 발현시키고 packaging signal을 갖고 있어 바이러스 입자로 envelope 유전자가 들어가도록 제조되었다. Gag/Gag-Pol expressor로부터 Gag와 Gag-Pol의 발현은 Rev 단백질을 요구하였고 Env expressor로부터 Rev 단백질 이 제공될 때 Gag와 Gag-Pol 단백질은 효율적으로 발현되었다. Gag/Gag-Pol과 Env expressor로 cotransfection된 COS-1 세포에서 $CD4^+$ T 세포를 일회성으로 감염시킬 수 있는 바이러스 입자가 생산되었다. 생산된 바이러스 입자는 $CD4^+$ T 세포에 HIV-1 envelope 유전자를 전달하여 envelope 당단백질을 발현시켰고 복제 가능한 자손 바이러스의 생성을 유도하지 못하였다. 본 연구에서 개발된 방법은 $CD4^+$ T 세포에서 envelope 당단백질의 기능을 분석하고 관심 있는 유전자를 $CD4^+$ T 세포에 전달하는 바이러스 입자의 생산에 이용할 수 있다.

• Journal of Ocean Engineering and Technology
• /
• v.30 no.2
• /
• pp.134-140
• /
• 2016

An envelope protection system is a control system that allows a submarine to operate freely using its own operational envelope without exceeding the structural limit, dynamic limit, and control input limit. In this paper, an envelope protection system for the pitch angle of a submarine is designed using a dynamic trim algorithm. A linear quadratic regulator and artificial neural network are used for the true dynamics approximation. A submarine maneuvering simulation program developed using experimental data is used to validate the designed envelope protection system. Simulation results show the effectiveness of the designed envelope protection system.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.8
• /
• pp.137-147
• /
• 1994

In this paper,we propose a knowledge-based system for locating Destination Address Block(DAB) by analyzing the structure of Korean envelope images. In the proposed system the preprocessing steps such as adaptive binarization connected component extraction and deskewing are carried out first for the effective structure analysis of the envelope image. Then DAB containing address name and zipcode parts of the input envelope image is extracted by an iterative procedure based on the knowledge acquired from the statistical feature analysis of the various envelope images. Most of the system for slocating address blocks on envelopes have extracted DAB by segmenting an envelope image into several candidate blocks followed by selecting one among the candidate blocks. Because it is very difficult to segment a Korean envelope image into several blocks due to the specific writing habits that the addresses on the envelope are written in close proximity to each other the proposed iterative procedure determines DAB by splitting or merging the connected components and verifies the determined DAB without segmentation and selection. Experiments with a great number of the live envelopes provided from Seoul Mail Center in Koorea were carried out. The results reveal that the proposed system is very effective for address block location on Korean envelopes.

• Journal of Power Electronics
• /
• v.13 no.2
• /
• pp.197-205
• /
• 2013

In energy injection resonant AC-AC converters, due to the low frequency effect of the AC input envelope and the low energy injection losses requirement, the constant and steady control of the high frequency AC output envelope is still a problem that has not been solved very well. With the aid of system modeling, this paper analyzes the mechanism of the envelope pit on the resonant AC current. The computing methods for the critical damping point, the falling time and the bottom value of the envelope pit are presented as well. Furthermore, this paper concludes the stability precondition of the system AC output. Accordingly, an optimal control method for the AC output envelope is put forward based on the envelope prediction model. This control method can predict system responses dynamically under different series of control decisions. In addition, this control method can select best series of control decisions to make the AC output envelope stable and constant. Simulation and experimental results for a contactless power transfer system verify the control method.

• Journal of IKEEE
• /
• v.22 no.4
• /
• pp.1019-1024
• /
• 2018

In this paper, we suggest a combined cost function to find out the optimal operation of an envelope tracking system, and evaluated its performance with Quadrature Amplitude Modulation (QAM) waveform, with which envelope tracking coefficients for the peak drain efficiency and the bandwidth of power amplifiers are determined. Based on the classical envelope tracking theory, the operation of the supply modulator, which is a key part of the envelope tracking process, is modeled and analyzed mathematically. Then characteristics of the modulator by setting envelope shaping function as a cubic polynomial and sweeping the coefficients of this function was analyzed. By sweeping the coefficients, efficiency and bandwidth at each condition with 64-QAM signal was used to obtain optimal point of the supply modulator. Compared to the conventional shaping functions, the optimized function showed the bandwidth reduction by 12.7 percent point while the efficiency was maintained.

• Architectural research
• /
• v.7 no.2
• /
• pp.47-54
• /
• 2005

A photoelectric dimming control system for a small private office space with a double skin envelope system was analyzed for the purpose of examining optimum control performances under a variety of daylight conditions. Computer simulations were performed for the three different photosensor types positioned at the center of ceiling in the space. They were applied in both a south and north-facing room. Daylight conditions were a fixed horizontal venetian blind on an external envelope and a retractable shading device on an internal envelope under a clear, intermediate and overcast sky at different times of a day and year. Partially-shielded photosensors provided good control performances providing the required electric light output under clear and intermediate sky conditions. Unshielded photosensors failed to provide necessary illuminance levels producing less electric output and fully-shielded photosensors generally provided excessive light output. Reasonable electric lighting energy savings were achieved except under overcast sky conditions where the control system did not contribute to energy savings due to the less daylight through envelopes. The retractable shading device covering 50% of the internal envelope reduced energy savings up to 19.62%, but the workplane illuminance levels were maintained within recommended ranges. The coefficients of determination between workplane illuminance and photosensor illuminance due to daylight ranged from 0.74 to 0.98. Partially-shielded conditions provided best correlations and the north-facing room yielded stronger correlation than the south-facing room.

• KIEAE Journal
• /
• v.16 no.5
• /
• pp.73-79
• /
• 2016

Purpose: In order to improve the energy performance of existing buildings, so actively promoted green remodeling business. Also, improvement of the performance of envelope system of apartment housing is an absolute. The purpose of implementation of the data base and application plan of the envelope system for green remodeling of apartment housing. Method: For this study, It proposed a classification system of green remodeling envelope system constructed actual to select the applicable representative method and input material of apartment housing for green remodeling. In this study, divided into construction waste processing stage and production phase of the material for the boundary of the system, and implementation the classification system of the envelope system for applicable green remodeling. For this, established 6 environmental impact categories database. Result: As a result of various suggestions were available for case study research, alternative combinations of existing combinations than six kinds of environmental impact insulation system with superior input materials combining 96 kinds, window system, 12 kinds for determining the applicability of the established database. Depending on the account for a large proportion if compared to the detailed analysis of the environmental impact resulting from the production phase and disposal phase was analyzed that the operating management of the necessary input materials. Is considered that the economic performance and integrated energy performance required by the applicable public housing green remodeling evaluation techniques considered for future improvements insulation sheath.

• International Journal of Aerospace System Engineering
• /
• v.2 no.2
• /
• pp.73-78
• /
• 2015

According to the characteristic of carrier-based aircraft, the method of solving safe set during arresting landing is discussed in this paper based on optimal control and invariant set theory. The safe sets of carrier aircraft are evaluated in different states on the characteristic of longitudinal augmented system by using the level set method. Then, the influence on the boundary of safe set under various factors is analyzed. At last, the maneuverability envelope protection is established based on the corresponding theory, and the validity of the system is verified through simulation. The results demonstrate preliminarily that: compared with mass and thrust, the elevator is the greatest influence factor for the boundary of safe set; the dynamic trajectory of carrier-based aircraft can be located at the interior of safe set effectively with the maneuverability envelope protection.

• Journal of Welding and Joining
• /
• v.27 no.6
• /
• pp.55-61
• /
• 2009

This study aims for determination of cutting work envelope of an articular robot for H-beam cutting. The robot has its own work envelope. The cutting of piece with groove requires the specific position of the torch which contracts the work envelope. This study suggested the new method to determine the cutting work envelope for this case. The method simplified the problem by use of the combination of inverse kinematics and forward kinematics. The method was used for cutting the H-beam with groove. The cutting work envelope was determined easily. The result was verified by 3D simulation system which implements the articular robot with 6 axes and the H-beam in the virtual shop.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.2
• /
• pp.981-988
• /
• 2018

In order to acquire an accurate TOF, this paper proposes a method that produces TOF by using a mathematical model for the envelope of the received signal obtained from a system dynamic model of ultrasonic transducer. The proposed method estimates the arrival time of the received signal retrospectively by comparing its wave form obtained after triggering point with its mathematical envelope model. Experimental result shows that the error due to variation of triggering point can be dramatically decreased by implementing the proposed method.