• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.9
• /
• pp.210-217
• /
• 2020

Since multiple generation technology can have various entry modes by adjusting performance, price, and entry timing, understanding of market entry mode of multiple generation technology is important. This study defined the concept of market entry mode based on multiple dimensions (technology, time, performance, or price) and developed a model for various types of market entry modes. Based on a literature review, the definition and types of market entry mode were provided, and the accuracy of the model was verified based on a case study on the semiconductor and smartphone market. Six market entry modes of multiple generation technology were modeled as moderate performance and early entry, high performance and early entry, low performance and early entry, moderate performance and late entry, high performance and late entry, and low performance and late entry. This study will be useful to understand the market entry mode of multiple generation technology by defining and developing a model for entry mode and can be applied to other markets in addition to multiple generation technology.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.11 no.1
• /
• pp.482-494
• /
• 2019

In this paper, the oblique water-entry impact of a vehicle with a disk cavitator is studied experimentally and numerically. The effectiveness and accuracy of the numerical simulation are verified quantitatively by the experiments in this paper and the data available in the literature. Then, the numerical model is used to simulate the hydrodynamic characteristics and flow patterns of the vehicle under different entry conditions, and the axial force is found to be an important parameter. The influences of entry angle, entry speed and cavitator area on the axial force are studied. The variation law of the force coefficient and the dimensionless penetration distance at the peak of the axial force are revealed. The research conclusions are beneficial to engineering calculations on the impact force of a vehicle with a disk cavitator over a wide range of water-entry parameters.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.11
• /
• pp.1719-1732
• /
• 2009

A firm seeking to enter a foreign market must make an important strategic decision of which market entry mode to use. Because entry modes involve resource commitments, the initial choice by a firm on a particular entry mode is difficult to change without a considerable loss of time and money. Substantial prior research has been undertaken to explain why firms select a particular entry mode into global markets. However, there exists limited research on this area in the field of foreign apparel brands in Korea, although some research has analyzed influential entry mode factors when Korean textile and clothing companies went overseas. This study reviews prior research on the entry mode choice and analyzes the factors that influence the entry mode choice for 510 foreign clothing brands in Korea. Price range, clothing types, distribution strategy, and cultural distance were considered as influential determinants for different entry mode choices. Crosstabs with a chi-square test and logistic regression are used for analysis. This study shows that high-priced brands and luxury brands are associated with the export orientated entry mode in the Korean market. Brands that pursued the strategy of multiple distribution channels showed a preference for a licensing mode or direct investment over other entry modes, and brands from higher-cultural-distance countries entered the Korean clothing market by licensing mode. The findings of this study are appropriate for the strategic planning of foreign apparel intent on entering the Korean market or for Korean apparel firms planning to enter the global market.

• International Journal of Advanced Culture Technology
• /
• v.11 no.2
• /
• pp.330-344
• /
• 2023

This research report cuts across management sciences (market strategy entry mode development) and innovative technology (Electric Vehicle (EV)) alongside measures to submerge global warming. The development of a successful entry mode for the electric Vehicle into the African continent is the main objective of the study. The study focuses on an analysis of how electric car manufacturers can enter the African market in other to achieve global sustainability and social responsibility. The methodology is based on identifying the factors that affect the choice of an entry mode into international markets by multinational companies desiring to leverage their revenue through a foreign market. It also offered a quantitative approach that can support the economic and sustainability entry mode model for EVs and a qualitative approach of Porter's five forces analysis as an entry mode coaching tool for EVs. These proxies are used in quite a wide range of multivariate statistical methods (trend analysis, ratio, and probability, comparative t-test technique, auto-regression, and ordinary least square technique). The result acknowledges joint venture and setting of the plant (physical presents) as the optimal entry mode in African EV market. It requires the EV manufacturers a tire-free emission innovation technology in order to optimize the global sustainability initiative.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.21 no.4
• /
• pp.71-76
• /
• 2013

This paper seeks to investigate the effect of technology readiness on the usage of smart entry service. The questionnaires were distributed to passengers who were experience with smart entry service and structural equation modeling was utilized to analyze the data. The results revealed that optimism had a positive impact on perceived usefulness and insecurity had a negative effect on perceived enjoyment. Perceived ease of use had a positive impact on perceived enjoyment, perceived usefulness and intention to use. In addition, perceived usefulness had a positive impact on intention to use. The results from this paper can be used as basic knowledge for developing the smart entry service activation plan.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.6
• /
• pp.1026-1033
• /
• 2010

The analysis of water-entry impact forces acting on the fin shaft of high speed water-entry body is described. During the entry of high speed body into water, the physical phenomenon and flow properties are analyzed. A proper analysis model is established and the method to estimate the flow force which causes impact torque at the fin shaft is described. It is assumed that the fin shaft is damaged by the force which is induced by contacting with cavity wall. The pressure distribution of fin and the maximum torque are estimated and compared with breaking force. Conclusively, it is hard to resist water-entry impact force in terms of the reinforcement of fin shaft. Additionally safe equipment is essentially required.

• Geomechanics and Engineering
• /
• v.22 no.6
• /
• pp.541-552
• /
• 2020

With the increasing tension of current coal resources and the increasing depth of coal mining, the gob-side entry retaining technology has become a preferred coal mining method in underground coal mines. Among them, the technology of the gob-side entry retaining with the high-water filling material can not only improve the recovery rate of coal resources, but also reduce the amount of roadway excavation. In this paper, based on the characteristics of the high-water filling material, the technological process of gob-side entry retaining with the high-water filling material is introduced. The early and late stress states of the filling body formed by the high-water filling materials are analyzed and studied. Taking the 8th floor No.3 working face of Xin'an coal mine as engineering background, the stress and displacement of surrounding rock of roadway with different filling body width are analyzed through the FLAC^3D numerical simulation software. As the filling body width increases, the supporting ability of the filling body increases and the deformation of the surrounding rock decreases. According to the theoretical calculation and numerical simulation of the filling body width, the filling body width is finally determined to be 3.5m. Through the field observation, the deformation of the surrounding rock of the roadway is within the reasonable range. It is concluded that the gob-side entry retaining with the high-water filling material can control the deformation of the surrounding rock, which provides a reference for gob-side entry retaining technology with similar geological conditions.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.18 no.2
• /
• pp.146-153
• /
• 2015

An unmanned aerial photography method by using an unmanned helicopter is useful method for measuring of the water-entry traces of small falling objects into the sea. Pixel sizes on the aerial photograph may be too large due to a limit of camcorder resolution and a wide shooting area. If the pixel size is too large, identification of water-entry trace is impossible. Thus an accurate prediction of water-entry trace size is required. The traces of water-entry could be classified into three types such as splash, water column, and bubble. Diameters of each trace are predicted by water-entry impact pressure theories, cavity theories, and trial test results. The results are verified by drop tests using an unmanned helicopter at two water-entry speeds. As a result, prediction and test results showed sufficient similarity to evaluate the identifiability of water-entry trace.

• Geomechanics and Engineering
• /
• v.18 no.4
• /
• pp.439-448
• /
• 2019

The bearing capacity of roadside support is the key problem in gob-side entry retaining technology. To study the cooperative bearing characteristics of the roof-roadside support-floor along the gob-side entry retaining, a mechanical model of the composite structure of the roof-roadside support-floor was first established. A method for determining the structural parameters of gob-side entry retaining was then proposed. Based on this model, adaptability analysis of roadside support was carried out. The results showed that the reasonable width of the gob-side entry roadway was inversely proportional to the mining height, and directly proportional to the bearing strength of the roof and floor. And the reasonable width of the "flexible-hard" roadside support was directly proportional to its own strength, and inversely proportional to the width of the gob-side entry retaining. When determining the position and size of the roadside support along the gob-side entry retaining, the surrounding rock environment should be fully considered. Measured results from case study also show the rationality of the model and calculation method.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.11 no.1
• /
• pp.495-509
• /
• 2019

The objective of this study is to analyze the compressibility effects of multiphase cavitating flow during the water-entry process. For this purpose, the water-entry of a projectile at transonic speed is investigated computationally. A temperature-adjusted Tait equation is used to describe the compressibility effects in water, and air and vapor are treated as ideal gases. First, the computational methodology is validated by comparing the simulation results with the experimental measurements of drag coefficient and the theoretical results of cavity shape. Second, based on the computational methodology, the hydrodynamic characteristics of flow are investigated. After analyzing the cavitating flow in compressible and incompressible fluids, the characteristics under compressible conditions are focused upon. The results show that the compressibility effects play a significant role in the development of cavitation and the pressure inside the cavity. More specifically, the drag coefficient and cavity size tend to be larger in the compressible case than those in the incompressible case. Furthermore, the influence of entry velocities on the hydrodynamic characteristics is investigated to provide an insight into the compressibility effects on cavitating flow. The results show that the drag coefficient and the impact pressure vary with the entry velocity, and the prediction formulas for drag coefficient and impact pressure are established respectively in the present study.