• Journal of the Korean Society of Visualization
• /
• v.5 no.1
• /
• pp.37-42
• /
• 2007

Reverse flow occurs in a channel when there is an obstruction at the entry. However it has been shown recently that reverse flow can be realized without an obstruction, by staggering the sides of the channel and placing it at an angle of attack to the oncoming flow. In this study the latter flow is computationally investigated. Studies have been carried out for different widths (gap between the two walls forming the channel), and at an angle of attack of 30. The results have captured all the essential features of this complex phenomenon and show the time dependent pumping mechanism which leads to the occurrence of reverse flow.

• Fire Science and Engineering
• /
• v.5 no.2
• /
• pp.21-35
• /
• 1991

As a part of studies of drag reduction phenomenon, at the entrance flow region of abrupt contraction tube flowing water, dilute and concentrated drag reducing polymer solutions contraction losses are estimated experimentally. Futher more, entrance lengths are considered theoretically and are measured experimentally. In the present experiment, fluid temperature is fixed l$0^{\circ}C$ and flow rates are 3,000

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.6
• /
• pp.903-911
• /
• 2009

During the past three or four decades, the characteristics of turbulent swirling flow have been studied extensively because of their scientific and academic importance. This research deal with the periodic flow oscillation with and without swirling flow in a 180 degree circular tube using hot wire anemometry, microphone and accelerometer. The frequency regions are observed through the structured oscillation from spectrum. This work carried out to measure the sound level by using hot wire anemometry, microphone and accelerometer for each Reynolds number, $6{\times}10^4$, $8{\times}10^4$ and $1{\times}10^5$ respectively at the entry of the test tube with and without swirl flow.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.3
• /
• pp.76-83
• /
• 2001

An experimental investigation has been performed on the steady flow in exhaust system. When individual flow coming from exhaust manifold entered UCC, the inlet conditions at entry to the diffuser in UCC were affected by the upstream pipe and manifold works. But those effects of the inlet condition on flow through monolith are negligible because the flows are concentrated on the center of monolith regardless of inlet flow distribution. To improve the flow distribution, we installed the cone type circular ring in diffuser of UCC. This led to increasement of flow uniformity, but there was minor increment of pressure drop.

• 한국가시화정보학회:학술대회논문집
• /
• 2006.12a
• /
• pp.11-16
• /
• 2006

Reverse flow occurs in a channel when there is an obstruction at the entry, However it has been shown recently that reverse flow can be realized without an obstruction, by staggering the sides of the channel and placing it at an angle of attack to the oncoming flow. In this study the latter flow is computationally investigated. And the mechanism is investigated using PIV (Particle Image Velocimetry) method. The results have captured all the essential features of this complex phenomenon and show the time dependent pumping mechanism which leads to the occurrence of reverse flow.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.2 no.2
• /
• pp.42-48
• /
• 1994

Turbocharging is one of the best methods to improve the performance of diesel engines, because of its merits,-power ratio, fuel consumption and exhaust emissions. Most of them in small and medium diesel engines have adopted the pulse turbocharging method with twin entry vaneless radial turbines to maximize the energy utility of exhaust gas. This method requires the high performance of turbine under unsteady flow, and also the matching between turbine and diesel engine is most important. However, it is difficult to match properly between them. Because the steady flow data are usually used for it. Accordingly, it is necessary to catch the characteristics of turbine performance correctly over the wide range of the operation conditions under unsteady flow. In this paper, the characteristics of turbine performance under unsteady flow are represented at varying conditions, such as inlet pressure amplitude, turbine speed and frequence.

• Proceedings of the KSME Conference
• /
• 2000.11b
• /
• pp.467-472
• /
• 2000

Most of the past experimental or analytical studies were performed for the curved bend with a square cross-section. Velocity profiles and Reynolds stresses of the turbulence flow in the 270 degree bend with circular cross-section were measured by a hot-wire anemometer. The mean velocity of primary flowing direction effected by the downstream of bend in the entry region of the bend. The flow in the inner part of the bend slowed the distribution velocity relatively large and unsymmetric phenomenon. In the strong secondary flow occurred when the flow passed in the region of 45 degree to 90 degree. The secondary flow appeared very large value in the neighbor region of inner wall.

• Journal of Creative Information Culture
• /
• v.5 no.3
• /
• pp.307-317
• /
• 2019

This study is an example of the education of block coding and physical computing teaching tool for preservice teachers at the college of education. The students were familiar with coding and improved their coding skills in solving various problems through 'Entry' that support block coding. In addition, the students configured the computing system with various input / output devices of the physical computing teaching tool and controlled things through programming and produced the educational portfolio to experience the whole process of problem analysis, design, implementation, and testing in coding. We applied Flow based coding and Pair programming as the teaching methods, and the results of the survey to measure the effectiveness of the study show that students have a good understanding of the entry and physical computing teaching tool and using the combination of the entry and physical computing teaching tool were more effective in learning than the Entry-only coding. In addition, it was confirmed that the effect of Pair programming applied in the physical computing teaching tool.

• 한국전산유체공학회:학술대회논문집
• /
• 1995.10a
• /
• pp.188-193
• /
• 1995

Incompressible developing entry flows through square ducts with 90 degree bends are studied numerically by using an efficient implicit SMAC scheme with different boundary conditions. This study eventually aimed at passage flow analysis of turbomachinery elements with a strong curvature such as centrifugal impeller or draft tube. The generalized implicit scheme used in the present study has been developted to solve the three-dimensional Navier-Stokes equations by the author. Numerical results for some different numerical conditions are obtained and compared with each other

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.9
• /
• pp.891-896
• /
• 2011

In this study, experiments were carried out to investigate the convective heat transfer characteristics of rectangular microchannels. The sample used in the experiments contained 20 rectangular microchannels in parallel. The channels had a hydraulic diameter of 700 ${\mu}m$. Distilled water was used as the working fluid. In the experiments, the Reynolds number ranged from 400 to 800, heat flux ranged from 35 to 85 kW/$m^2$, and the inlet fluid temperature was $20^{\circ}C$. As a result, the convective heat transfer coefficient increased upon increasing the Reynolds number and ranged from 4.6 to 6.4 kW/$m^2/^{\circ}C$ in the thermally fully developed region. Moreover, the higher the Reynolds number, the longer the thermal entry length in the rectangular microchannels. However, it was observed that a variable heat flux did not affect the thermal entry length. In conclusion, a correlation was proposed to indicate the heat transfer characteristics in a thermally fully developed region.