• 제목/요약/키워드: Entrance section

검색결과 127건 처리시간 0.024초

300km/h급 고속철도의 터널 미기압파 저감을 위한 슬릿후드의 실험적 연구 (Experimental study on the alleviation of micro-pressure waves radiated from the tunnel exit with the slit hoods on the high-speed train operations of 300km/h)

  • 김동현;민동호
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2000년도 춘계학술대회논문집B
    • /
    • pp.619-624
    • /
    • 2000
  • The purpose of present study is to investigate for reducing micro pressure waves generated according to train speeds $(240km/h{\sim}380km/h)$ through tunnels with countermeasures as followings; the hood configuration in tunnel entrance. We developed hoods for tunnel of 0.5 km length in the condition of tunnel cross-section area of $107m^2$ on the slab track. According to the results the maximum micro-pressure wave is reduced by 41.2% for the slit hood installed at the entrance of the tunnel and reduced by 47.7% for the slit hood installed at the entrance of the tunnel and the $45^{\circ}$ slanted portal at the exit of the tunnel

  • PDF

NURBS곡선을 이용한 수중운동체의 선형정의 (Hull Form Definition of Underwater Vehicle using NURBS Curve)

  • 김현철;표선식;김수영
    • 대한조선학회논문집
    • /
    • 제32권2호
    • /
    • pp.1-9
    • /
    • 1995
  • 본 연구는 수중운동체의 선형을 수치적으로 표현하고 변형하는 기법을 내용으로 한다. 즉, 주요치수-전체길이, 중앙평행부의 길이, entrance 및 run부분을 정의하는 계수(이하 entrance 및 run계수라 한다.)등-를 주어진 설계조건으로 하여 실린더형 수중운동체를 생성하고, 이것을 NURBS(Nonuniform rational B-spline)곡선으로 표현한다. 또한 선형의 각 단면은 사용자 Interface를 통해 변화되고, 얻어진 수중운동체의 Offset과 횡단면적 곡선(Sectional Area Curve:SAC)을 도출한다.

  • PDF

점탄성 특성을 가진 폴리머용액의 난류유동 열적입구길이에 관한 실험적 연구 (An experimental study on the thermal entrance lengths for viscoelastic polymer solutions in turbulent tube flow)

  • 유상신;황태성;엄정섭
    • 대한기계학회논문집
    • /
    • 제12권5호
    • /
    • pp.1189-1196
    • /
    • 1988
  • 본 연구에서는 내경이 각각 8.5mm와 10.3mm이며 무차원길이가 각각 710과 1158인 두 개의 시험관을 사용하는 유동장치를 제작하여 시험관 입구에서부터 유체역 학적 경계층(hydrodynamic boundary layer)과 열적 경계층(thermal boundary layer)이 동시에 발달하기 시작하는 경계조건을 형성하고 관벽에서 일정한 열 플럭스(constant heat flux)를 발생하는 조건을 부여하였다. 퇴화현상(degradation)에 대하여 비교적 안정성을 가진 폴리아크라마이드(polyacrylamide) Separan Ap273을 수도물에 용해하여 제조한 폴리머용액으로 유동특성과 열전달특성을 실험하여 열적입구길이와 열전달특성 을 규명하고자 한다.

조선대학교 병원 전문진료센타 설계 (Architectural and Interior Design of Chosun University Hospital Medical Center)

  • 박영호
    • 한국실내디자인학회:학술대회논문집
    • /
    • 한국실내디자인학회 2005년도 추계학술발표대회 논문집
    • /
    • pp.191-192
    • /
    • 2005
  • This project is to establish an annex clinic center under 5 floors with gross floor area of 3,000 Pyeong behind existing Chosun university Hospital main building with 600 beds. The goal of the design is connecting the new clinic center with the existing main building and completing a combined hospital that has synergy effects. Given the old condition of the hospital and characteristics of the ground, I tried to embody the image of Medical Pulse, which is very alive with strong pulse, and suggest vision of 21st century hospital. First, one main entrance as a combined hospital. For optimum access and functions, I used the entrance of existing building as the only main entrance of new combined hospital, rearrange the road in front of the main building and improve traffic system, and upgrade the image and function of combined main entrance by planning new atrium united robby that makes link to the main building easier. Second, section planning considering the optimum functions and convenience. I established 4 floors linking functionally with the existing building, minimized vertical traffic line, and enhanced convenience through barrier free environment, which is a horizontal traffic line without barriers, crucial to hospital. Third, combined zoning generating synergy effects. I linked sterilizing room with logistics center by operating room and service bridge, and arranged central treatment department horizontally, Also, by horizontally arranging cancer center and department of nuclear medicine close with PET and cyclotron center, I established identity of specialized departments.

  • PDF

서울 도시철도 환승역의 통행구간별 서비스만족도 평가 (Service Satisfaction Evaluation of Each Travel Section in Seoul's Subway Junctions)

  • 오미영;김장욱;박동주;손의영;이수범
    • 대한교통학회지
    • /
    • 제28권4호
    • /
    • pp.85-93
    • /
    • 2010
  • 기존 대중교통 서비스평가 시스템이 이용자의 의견을 충분히 반영하지 못하고 있다는 관점에서 도시철도 환승역을 대상으로 통행구간별 서비스 지표를 선정하고 평가하였다. 통행구간은 (1) 역사접근, (2) 역입구에서 승강장, (3) 승강장, (4) 환승통로로 구분하여 각 구간별 서비스 평가지표를 선정한 후, 교통전문가를 대상으로 한 계층화기법(AHP)을 통해 통행구간 및 서비스 평가지표간 가중치를 산정하였다. 그리고 나서 26개 환승역을 중심으로 2000명의 이용자에게 서비스 만족도에 대한 조사를 실시하였다. 분석결과, 역사접근과 환승통로가 가중치 면에서 상대적으로 높게 나타났으며, 동일한 서비스이더라도 통행구간에 따라 서비스의 가중치는 다르게 나타났다. 만족도는 승강장에서의 안락도, 환승통로에서의 혼잡도, 역입구-승강장의 타수단의 환승정보 제공정도 순으로 낮게 나타났다. 한편 IPA분석결과, 환승통로에서 제공하는 모든 서비스가 가중치는 상대적으로 높으나 만족도는 낮아서 우선적으로 개선할 필요가 있었다.

교통안전을 고려한 고속도로 휴게소 설계기준 개발 (Developing Design Guidelines for Rest Area Based on the Traffic Safety)

  • 이현석;이의은;서임기;박제진
    • 한국도로학회논문집
    • /
    • 제14권3호
    • /
    • pp.173-182
    • /
    • 2012
  • 휴게소 진 출입부는 설계속도 등이 급변하는 구간으로 교통안전 취약구간이며 특히, 휴게소 진입부는 감속과 주차공간 검색 두 가지 작업이 동시에 수행되므로 이용차량의 안전성을 확보할 수 있는 설계기준이 필요하다. 국내의 경우 영업소나 나들목, 분기점 같은 출입시설에 대한 기하구조 기준은 수립되어 있는 반면, 도로의 부속시설인 휴게소에 대한 상세한 기하구조 기준은 없는 실정이다. 이에 본 연구에서는 일반형 휴게소 135개소를 대상으로 한 현장조사 및 사고조사 자료를 활용하여 휴게소진 출입부 기하구조에 대한 문제점을 도출하였다. 휴게소 진 출입부의 설계구간을 분류하고 각 구간에 대한 설계요소를 도출한 후, 휴게소 진 출입부를 대상으로 속도조사 및 차량주행행태 조사를 수행하고 분석을 통해 설계요소별 최소 기준을 도출하였다. 진입 연결로의 시/종점 속도에 따라 감속거리 산정식을 이용하여 진입 연결로의 최소길이는 40m를 제안하였고, 주행행태를 기반으로 선형 안전성 평가를 통해 접속 설치각은 12~$17^{\circ}$를 제안하였다. 개발된 휴게소 진입부 설계기준은 신설되는 휴게소 뿐만 아니라 기존 휴게소에 대해 현실적으로 적용 가능한 개선방안을 제시할 수 있을 것으로 판단된다.

드라이빙 시뮬레이터 주행과 현장주행시 운전자 반응 비교 연구 (Comparative Study on Difference in Driver's Workload between Driving Simulator and Field Driving in Tunnel, Highway)

  • 김현진;김주영;최경임;주재홍;오철
    • 한국도로학회논문집
    • /
    • 제19권6호
    • /
    • pp.139-145
    • /
    • 2017
  • PURPOSES : This study analyzed the difference in a driver's workload between using a driving simulator and field driving in tunnel, highway. METHODS : Based on the literature review, it was found that a driver's workload could be quantified using biosignals. This study analyzed the biosignal data of 30 participants using data collected while they were using a driving simulator and during a field test involving tunnel driving. Relative energy parameter was used for biosignal analysis. RESULTS : The driver's workload was different between the driving simulator and field driving in tunnels, highway. Compared with the driving simulator test, the driver's workload exhibited high value in field driving. This result was significant at the 0.05 level. The same result was observed before the tunnel entrance section and 200 m after the entrance section. CONCLUSIONS : This study demonstrates the driving simulator effect that drivers feel safer and more comfortable using a driving simulator than during a field test. Future studies should be designed considering the result of this study, age, type of simulator, study site and so on.

대형 서점 내 서적 종류 및 가구배치에 따른 포름알데히드 발생 특성 (Formaldehyde Concentration Characteristics according to Type of Books and Furniture Arrangement in Bookstores)

  • 강동희;정찬권;김석환;이상진;김수민
    • 한국가구학회지
    • /
    • 제23권4호
    • /
    • pp.381-387
    • /
    • 2012
  • Utilization of underground floor is becoming the main issue of our society to maximize and diversify the potential of recent urban space. It has brought about the changes of underground floor. Recently there are lots of huge bookstores in these underground floor. Bleach, adhesive and ink used for manufacturing books pollute indoor air in bookstore. Therefore, the purpose of this study is to analyze indoor air quality in these large bookstores. Concentrations of carbon dioxide and formaldehyde in three large bookstores in Seoul were measured by presence and type of books and distance of main entrance which is well-ventilated. According to the data, space that places lots of volumes measured higher concentration of formaldehyde than that of non-existence books. Children's book section was measured more concentration of formaldehyde than other book section. Closer main entrance near outside, lower concentration of formaldehyde was measured. Concentration of carbon dioxide was affected by the number of people in bookstore.

  • PDF

난류현상을 이용한 고속도로 합류부의 영향권 세분화 연구 (Analysis on Propagation of Highway Traffic Flow Turbulence at Entrance-Ramp Junctions)

  • 김태헌;노창균;김원길;손봉수
    • 한국도로학회논문집
    • /
    • 제14권2호
    • /
    • pp.109-116
    • /
    • 2012
  • 본 연구의 목적은 도시고속도로 합류부의 특성 및 실제 교통상황을 고려하여 각 차로별, 구간별로 영향권을 분석하는 것을 목적으로 하였다. 향후에는 본 연구결과를 바탕으로 차로제어시스템(Lane Control System, LCS) 등 운전자 정보제공서비스 및 첨단기술에 적용하여 효율적인 도로이용을 통한 원활한 운행상태유지가 가능할 것이다. 본 연구에서는 속도의 표준편차를 기준으로 고속도로 합류부의 난류현상을 분석한 기존연구를 기반으로, 난류현상 발생정도를 기준으로 한 세분화된 합류부 영향권을 도출하였다. 난류현상을 기준으로 도출한 합류부 영향권은 합류지점을 중심으로 합류지점과 유사한 교통류 특성을 보이는 구간을 합류의 직접영향권으로 도출하였으며, 도출된 결과는 상류부 300m에서 500m구간의 1, 2, 3차로, 합류지점에서 300m지점까지의 전차로 및 하류부 100m지점까지의 전차로, 하류부 100m에서 300m구간의 2, 3차로로 분석되었다.

회전하는 정사각단면 $90^{\circ}$ 곡덕트 내 내향 난류유동 측정 (Measurement of Inward Turbulent Flows in a Rotating with Square Cross-Section $90^{\circ}$ Duct)

  • 김동철;전건호;최영돈
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2000년도 추계학술대회논문집B
    • /
    • pp.627-632
    • /
    • 2000
  • Developing turbulent flows in a rotating 90 degree bend with square cross-section were measured by a hot-wire anemometer. The six orientation hot-wire technique was applied to measured the distributions of 3 mean velocities and 6 Reynolds stress components. Effects of Coriolis and centrifugal forces caused by the curvature and rotation of bend on the mean motion and turbulence structures were experimentally investigated Productive addition of Coriolis and centrifugal forces to the outward radial direction in the entrance region of bend increases the secondary flow intensity according to the rotational speeds. However, after 45 degree of bend, centrifugal force due to the rotation of bend may promote the break down of counter rotating vortex pair into multi-cellular pattern, thereby decreasing the production rate of turbulence energy and Reynolds stresses.

  • PDF