• Tunnel and Underground Space
• /
• v.22 no.5
• /
• pp.297-309
• /
• 2012

The stability assessment of abandoned gangway for the purpose of services was performed. Among the many factors that affect the stability of openings, the span of the opening in a given rock mass condition provides an important element of design. In this paper, the stability of gangway was assessed by the critical span curves proposed by Lang, the modified Mathews'stability graph method and using support measures of the Q system. In the evaluation of stability as a whole the gangway is considered as stable. But the rockfalls of wedge-shaped blocks were expected in the area in which the horizontal joints of low angle appear. The support measures such as local rock bolts are required to use for commercial purposes of the abandoned gangway. And entrance section may require the particular attention as unstable section. Since there are so many spalling due to bad blasting in the roof and sidewall of gangway, the scaling operations should be followed primarily.

• Journal of architectural history
• /
• v.26 no.4
• /
• pp.35-44
• /
• 2017

The purpose of this study is to classify three-Kan hipped and gable-roofed Buddhist temples with the construction of their eave curve of part chunyeo and examine the characteristics and causes. The conclusions have been drawn as follows: First, there are largely three ways to secure symmetry in eave curve of part chunyeo. One is to obtain symmetry in eave curve of part chunyeo by making the size of eaves curves on well sides the same and forming symmetric curves in the front section along with the side roof and then forming the straight line in the central part (hereinafter referred to as the long straight line section method). The second is a method to enlarge eaves curves in the front and form eaves curves on the roof section to be symmetric (hereinafter referred to as the front is larger than side eaves curves method). The third is the method to make eaves curves in the roof section to be symmetric by adjusting the roof length and making difference between the front and side roof's length minimum (hereinafter referred to as the roof length-controlling method). Second, there are 16 cases applying two or more methods, and they are the mainstream. Third, there are 12 cases applying the front is larger than side eaves curve method and roof length-controlling method both, which seems to be the most universal. To sum up, they secured symmetry in roof edges considering the construction of seonjayeon and pyeongyeon according to the size of the structure, recognition on the directions of entrance into the area of the building, forms of planes, harmony with structures around, recognition on roof curves in accordance with the size, and also structural faults in the chunyeo part.

• Journal of the Society of Disaster Information
• /
• v.2 no.1
• /
• pp.91-111
• /
• 2006

Technology development of modern society reduces times, costs and labor costs but demands work forces requiring expert knowledge on technology. Consequently knowledge worker becomes important. Not changing into a specialist acquired expert knowledge, people can't survive in competitive society. Therefore, the purpose of this study is to grasp the actual condition of private security industry and to examine problems. The final goal is to find the way to improve the professionalism of workers in private security industry. First. Now we must make up for the subject for examination actually and be in a triangular position and complement a professional materials for teaching. At the same time it must strengthen the education using advanced instruments seek to Total Security System. Moreover it is demanded 'institutional supplement of security guard instructors' which means job training for security guard instructor Second. On the job training which can deal with a state of emergency through 'security guard training' with a theory and an actual training must be strengthen. Also, most security guards have low understandings and interests because their ages are from 50's to 60's. Accordingly proper education must be offered to security guard. Third. Certification system of the private security guards are needed to fix the problems on an indiscreet issue and an abuse of license through deliberation on the security license. Fourth. Universities must find a new market to minimize the squandering of human resources because of oversupply and reduce the personnel. Also with enhancing the employment rate through specialized education, universities must offer an education which keeps pace with the times for not an entrance strategy but a long-term development. Effort for education of specialist will produce an improvement in business quality and improved services produce a customer satisfaction. A customer satisfaction will produce a fame of a successful company and positive images in market area. Finally the private industry will be developed by productivity improvement.

• Journal of radiological science and technology
• /
• v.18 no.2
• /
• pp.49-59
• /
• 1995

Recently, general radiography became to variety because of the continuous development of Inverter type generator and ortho chromatic system. Therefore, we must re-evaluate about patient exposure dose and image quality. I studied about chest radiography which has frequency among general radiography being used during FEB. to AUG., 1994 over 151 medical facilities from medical facilities that are located in Seoul area. The result obtained were as follows ; 1) The rectification method of the generator were employing mainly single phase full wave in 82.8 %, three phase full wave in 11.26 % and Inverter type in 4.64 % and condenser type is 1.32 %. 2) Exposure kV was used below 80 kV in most medical facilities and 21.8 % of the medical facilities was using high tube voltage higher than 120 kV. 3) The exposure time was used below the 0.05 sec in 28.4 %, in 29.8 % of the medical facilities used above 0.1 sec. 4) The usage frequency of the added filter is 15.3 %, and among them compound filter was used only 4 %. 5) Rare earth screen was used in 37.7 %. 6) The average skin entrance dose was 0.25 mSv, the range of dose is $0.05{\sim}0.79\;mSv$ in each medical facilities. 7) The average density of the lung field is 1.76, 0.49 in lung side, 0.30 in mediastinum and 0.37 in heart shadow. Therefore it is required to improve all of these for increasing image quality and reducing patient exposure dose as soon as possible.

• Journal of Korean Society on Water Environment
• /
• v.33 no.6
• /
• pp.617-625
• /
• 2017

Both domestic and overseas urban drainage systems have been actively researched to solve the problems of urban flash floods and the flood damage that is caused by local downpours. Recent urban planning has been designed to better manage the floods of decentralized rainfall-management systems, and the installation of green infrastructure and low-impact development (LID) facilities at national ministries has been recommended. In this study, we use the EPA SWMM model to construct a decentralized rainfall-management network for each small watershed, and we analyze the effect of the drainage-capacity improvement from the installation of the LID technologies in vulnerable areas that replaces the network-expansion process. In the design of the existing urban piping systems, it is common to increase the pipe size due to the increment of the impervious area, the steep terrain, and the sensitive entrance-ramp junction; however, the installation of green infrastructure and LID facilities will be sufficient for the construction of a safe urban drainage system. The applications of LID facilities and green infrastructure in urban areas can positively affect the recovery of the corresponding water cycles to a healthy standard, and it is expected that further research will occur in the future.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.53-53
• /
• 2011

As the dimension of Cu interconnects has continued to reduce, its resistivity is expected to increase at the nanoscale due to increased surface and grain boundary scattering of electrons. To suppress increase of the resistivity in nanoscale interconnects, alloying Cu with other metal elements such as Al, Mn, and Ag is being considered to increase the mean free path of the drifting electrons. The formation of Al alloy with a slight amount of Cu broadly studied in the past. The study of Cu alloy including a very small Al fraction, by contrast, recently began. The formation of Cu-Al alloy is limited in wet chemical bath and was mainly conducted for fundamental studies by sputtering or evaporation system. However, these deposition methods have a limitation in production environment due to poor step coverage in nanoscale Cu metallization. In this work, gap-filling of Cu-Al alloy was conducted by cyclic MOCVD (metal organic chemical vapor deposition), followed by thermal annealing for alloying, which prevented an unwanted chemical reaction between Cu and Al precursors. To achieve filling the Cu-Al alloy into sub-100nm trench without overhang and void formation, furthermore, hydrogen plasma pretreatment of the trench pattern with Ru barrier layer was conducted in order to suppress of Cu nucleation and growth near the entrance area of the nano-scale trench by minimizing adsorption of metal precursors. As a result, superconformal gap-fill of Cu-Al alloy could be achieved successfully in the high aspect ration nanoscale trenches. Examined morphology, microstructure, chemical composition, and electrical properties of superfilled Cu-Al alloy will be discussed in detail.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.4
• /
• pp.2385-2390
• /
• 2015

In the beginning run, urban railway had been required as transportation. But now days urban railway have stayed in the platform for long time, the platform is faced the problem that is improvement of environment as one of the living space. Thus, sliding automatic door on the basis of screen door have used in huge distribution market, hospital, restaurant and public office because it is comfortable that customer's convenience and entrance are controled. So screen door not only requires customer's convenience and safe, clean area and energy conservation but demands optimal design technology development of screen door system that is confirmed by element parts of design and confidence. In this paper, For secure confidence of screen door, after as modeling roller and frame's system, confirming the result for qualification of driving stiffness. And then it suggests that it is possible to increase performance and declines fraction defective of element's part.

• Archives of design research
• /
• v.20 no.2 s.70
• /
• pp.89-102
• /
• 2007

Seoul suffers from over congestion of outdoor signage. Signage is on everywhere including on windows, on entrance way, on every available space on the building wall. The excessiveness is up to the point that decorating surface of a building is almost meaningless and most signage is lost in each other's profuse presence. The competition to attract more attention is resulting in bigger, brighter, and more stimulating signage. As the result, outdoor signage of Seoul have lost its intended function to provide useful information and befallen to be viewed as visual pollution. As it is an important visual element of city view, the outdoor signage also serves important role of delivering needed information in proper way to enhance convenience of city life. At the same time, it is a very important marketing tool that is essential to economic activity. Outdoor signage also holds enormous potential to act as a visual and structural element to improve city view just as a beautiful architecture does. However, outdoor signage that does not consider the harmony with its surrounding environment can only be treated as visual pollution. The effort of Seoul to better the city view by improving the outdoor signage started at Jong-ro area. By reforming outdoor signage, the streets of Jong-ro achieved much more harmonious and aesthetically pleasing city view. The study went through analysis of current status and characteristics of outdoor signage of Cheonho-dong Rodeo Street, Gangdong district to suggest detailed design solution to reform the roadside view and to revitalize the street.

• Journal of the Korean housing association
• /
• v.20 no.2
• /
• pp.59-68
• /
• 2009

Community centers have been public facilities for the welfare and conveniences for the residents since 1999. Currently, the numbers of community centers meet the demands in quantity, but they do not satisfy the quality service needs for the improved life style of residents and the activation of local community. Therefore, the purposes of this research are to find out the current status, types and characters of facilities for the quality improvement of community centers. As the research methods, 'home pages of community centers', 'gujung backseo' were used, and '40 case studies' were completed. Case studies were done by observation and research on the actual conditions. The case works were done between July- September in 2008. Followings are the results of the study; 1. Area measurements of the community centers are being increased since 2000. 2. Complex facility types of community centers are mainly public administrative facilities (community center)+public administrative facilities of mixed type. 3. There are three architectural types of community centers: horizontal type, vertical type, mixed type. 4. There are three classified entrance types for the community centers. 5. There are twelve classified facility types for the community centers. Community centers are usually mixed with diverse facilities, especially welfare facilities and cultural facilities. Proper community center types which contain the functional characters and varieties of facilities should be developed, and these active centers should be used conveniently by residents, thus, further study is required in this regard.

• Journal of the Korean Society for Railway
• /
• v.16 no.6
• /
• pp.454-459
• /
• 2013

Pressure waves are generated and propagate in a tunnel when train enters tunnel high speed. A compression wave due to the entry of train head propagates along the tunnel and is reflected at tunnel exit as an expansion wave. An expansion wave due to the entry of the train tail propagates along the tunnel and is reflected at tunnel exit as a compression wave. These pressure waves are repeatedly propagated and reflected at the tunnel entrance and exit. Severe pressure changes causes ear-discomfort for passengers in the cabin and micro pressure waves around the tunnel exit. It is necessary to analyze the transient pressure phenomena in tunnels qualitatively and quantitatively, because pressure change rate is considered as one of the major design parameters for optimal tunnel cross sectional area and repeated fatigue force on car body. In this study, we developed a characteristics method based on a fixed mesh system and boundary conditions for crossing trains and analyzed this system using an X-t diagram. The results of the simulation show that offsetting of pressure waves occurs for special entry conditions of a crossing train.