• Journal of Environmental Science International
• /
• v.31 no.2
• /
• pp.131-139
• /
• 2022

This study aimed to evaluate the effects of four types of environmental enrichment on the improvement of companion dogs' behavioral problems due to separation anxiety. A total of 21 dogs of various breeds were included in the study. Data were collected to investigate the behaviors associated with anxiety in dogs, including vocalization, elimination, escape attempts, and destructiveness. A first stage, in which the dog and owner were together (P0), lasted 15 min, and a second stage, in which the dog and owner were separated (P1), lasted 15 min. After the dog and owner were separated (P1), the third stage (P2), during which the environment was enriched, lasted 20 min, and the fourth stage, following environment enrichment (P3), lasted 15 min. The results of the study indicated that compared to P0, the frequency of problematic behavior was highest during the 15 min following separation from the owner (P1). Following environmental enrichment, the average frequency of problematic behaviors in P2 decreased (P < 0.001) compared to P1. Environmental enrichment can also be used appropriately in the case of companion dogs, including shelter dogs or experimental dogs that use a limited kennel, and is a particularly effective means of improving the quality of life of dogs.

• Mass Spectrometry Letters
• /
• v.15 no.1
• /
• pp.1-25
• /
• 2024

Protein glycosylation, a highly significant and ubiquitous post-translational modification (PTM) in eukaryotic cells, has attracted considerable research interest due to its pivotal role in a wide array of essential biological processes. Conducting a comprehensive analysis of glycoproteins is imperative for understanding glycoprotein bio-functions and identifying glycosylated biomarkers. However, the complexity and heterogeneity of glycan structures, coupled with the low abundance and poor ionization efficiencies of glycopeptides have all contributed to making the analysis and subsequent identification of glycans and glycopeptides much more challenging than any other biopolymers. Nevertheless, the significant advancements in enrichment techniques, chromatographic separation, and mass spectrometric methodologies represent promising avenues for mitigating these challenges. Numerous substrates and multifunctional materials are being designed for glycopeptide enrichment, proving valuable in glycomics and glycoproteomics. Mass spectrometry (MS) is pivotal for probing protein glycosylation, offering sensitivity and structural insight into glycopeptides and glycans. Additionally, enhanced MS-based glycopeptide characterization employs various separation techniques like liquid chromatography, capillary electrophoresis, and ion mobility. In this review, we highlight recent advances in enrichment methods and MS-based separation techniques for analyzing different types of protein glycosylation. This review also discusses various approaches employed for glycan release that facilitate the investigation of the glycosylation sites of the identified glycoproteins. Furthermore, numerous bioinformatics tools aiding in accurately characterizing glycan and glycopeptides are covered.

• Nuclear Engineering and Technology
• /
• v.50 no.1
• /
• pp.126-131
• /
• 2018

As it is known, uranium enrichment is carried out on industrial scale by means of multistage separation facilities, i.e., separation cascades in which gas centrifuges (GCs) are connected in series and parallel. Design and construction of these facilities require significant investment. So, the problem of calculation and optimization of cascade working parameters is still relevant today. At the same time, in many cases, the minimum unit cost of a product is related to the cascade having the smallest possible number of separation elements/GCs. Also, in theoretical studies, it is often acceptable to apply as an efficiency criterion the minimum total flow to supply cascade stages instead of the abovementioned minimum unit cost or the number of separation elements. In this article, cascades with working parameter of a single GC changing from stage to stage are optimized by two of the abovementioned performance criteria and are compared. The results obtained allow us to make a conclusion about their differences.

• Korean Journal of Food Science and Technology
• /
• v.19 no.3
• /
• pp.225-230
• /
• 1987

The foam separation of bovine serum proteins was investigated and the protein fractionation by foam separation was analyzed by PAG electrophoresis. The protein concentration for the surface excess formation of bovine serum was in the range of $20-800\;{\mu}g/ml$. At pH 5, the foamate volume was maximum, but the enrichment ratio minimum. As the temperature was elevated, the foamate volume decreased and the enrichment ratio increase. As the gas flow rate increased from 25 to 100 ml/min, the foamate volume decreased and the enrichment ratio increased. The enrichment ration became maximum when the added ionic strength of serum solution was in the range of 1-3 by the addition of different types of salts, and this was related to the reduction of surface tension of the solution. In general, BSA, ${\alpha}_1$, and ${\alpha}_2-globulins$, which have relatively small molecular weight and high hydrophobicity, moved easily to the foam, and the separation of protein fractions in the serum varied with the changes in pH, temperature, gas flow rate and ionic strength of the solution.

• Journal of the Korean Society of Industry Convergence
• /
• v.4 no.1
• /
• pp.61-69
• /
• 2001

Polycarbonate(PC) membranes for oxygen enrichment from air were prepared by the wet phase inversion method. In order to improve oxygen separation performances of the PC membrane, the effect of the added ethanol(nonsolvent) and $CuCl_2$(metal salt) concentration in the casting solution on morphology, oxygen permeability ami $O_2/N_2$ separation factor of the membrane was studied. In addition, tensile strength and elongation at break of the membrane were investigated. An asymmetric membrane with a dense top layer and a porous sublayer was obtained. The thickness of the dense top layer decreased with increasing amount of nonsolvent additive. Compared with pure PC membrane without additive(metal salt), the oxygen permeability and $O_2/N_2$ separation factor of the $PC/CuCl_2$ membrane are significantly improved. The oxygen permeability and $O_2/N_2$ separation factor is $5.25{\times}10^{-9}cm^3(STP){\cdot}cm/cm^2{\cdot}sec{\cdot}cmHg$ and 4.5, respectively. This improvement might be due to good interaction between metal salt and oxygen.

• Journal of Electrochemical Science and Technology
• /
• v.10 no.1
• /
• pp.14-21
• /
• 2019

Supported liquid membrane process usually is used for recovering or enrichment of valuable metals in the industrial wastewater. But, even if the metals in the wastewater was separated with high chemical selectivity, it cannot be enough concentrated since separation performance of supported liquid membrane (SLM) process is limited by concentration gradient between feed solution and stripping solution. If metal concentration in the stripping solution to be enough low, transport of metal through membrane can be accomplishment constantly. Therefore, Electrodialysis (ED) has been placed after SLM process and the stripping solution of SLM was used as the feed solution for the ED process. Transport of ions in the solutions is successfully performed by ED process. Thus, the metal concentration in the stripping solution does not rise as to stop ion transport. Besides, valuable metals easily are concentrated by ED process for re-use. In this study, effects of operation parameters like initial Cd(II) concentration, HCl concentration in the feed solution of SLM and applied voltage are investigated on separation efficiency, flux and permeability of the both processes. As the feed solution concentration increased, all performance values has increased. When initial concentration of 100 mg/L is used, separation performances (SP) are 55% and 70%, for SLM and consecutive process, respectively. The best HCl concentration in the feed solution of SLM has determined as 2 M, in this conditions SP are 64% and 72%, for SLM and consecutive process, respectively. With increased of applied voltage on ED process, SP of the consecutive process has been raised from 72% to 83%. According to the obtained experimental data, consecutive process has better separation performance than SLM. When the separation performances of both processes were compared for the same operating conditions, it was determined higher the separation efficiency, permeability and flux values of the consecutive process, 8%, 9% and %10.6, respectively. Consequently, the use of the consecutive process increases the performance efficiency of both processes. The consecutive process studied has quite a good chemical separation efficiency, and enrichment capability. Moreover, this process requires few water and energy.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.10
• /
• pp.3298-3302
• /
• 2012

Although offline enrichment of phosphorylated peptides is widely used, enrichment for phosphopeptides using $TiO_2$ is often performed manually, which is labor-intensive and can lead to irreproducible results. To address the problems associated with offline enrichment and to improve the effectiveness of phosphopeptide detection, we developed an automated online enrichment system for phosphopeptide analysis. A standard protein mixture comprising BSA, fetuin, crystalline, ${\alpha}$-casein and ${\beta}$-casein, and ovalbumin was assessed using our new system. Our multidimensional system has four main parts: a sample pump, a 20-mm $TiO_2$-based column, a weak anion-exchange, and a strong cation-exchange (2:1 WAX:SCX) separation column with LC/MS. Phosphorylated peptides were successfully detected using the $TiO_2$-based online system with little interference from nonphosphorylated peptides. Our results confirmed that our online enrichment system is a simple and efficient method for detecting phosphorylated peptides.

• Bulletin of the Korean Chemical Society
• /
• v.22 no.5
• /
• pp.503-506
• /
• 2001

Separation of lithium isotopes was investigated by chemical ion exchange with a hydrous manganese(IV) oxide ion exchanger using an elution chromatography. The capacity of manganese(IV) oxide ion exchanger was 0.5 meq/g. One molar CH3COO Na solution was used as an eluent. The heavier isotope of lithium was enriched in the solution phase, while the lighter isotope was enriched in the ion exchanger phase. The separation factor was calculated according to the method of Glueckauf from the elution curve and isotopic assays. The single stage separation factor of lithium isotope pair fractionation was 1.021.

• Mass Spectrometry Letters
• /
• v.6 no.2
• /
• pp.31-37
• /
• 2015

Phosphorylation upon protein is well known to a key regulator that implicates in modulating many cellular processes like growth, migration, and differentiation. Up to date, grafting of multidimensional separation techniques onto advanced mass spectrometry (MS) has emerged as a promising tool for figuring out the biological functions of phosphorylation in a cell. However, advanced MS-based phosphoproteomics is still challenging, due to its intrinsic issues, i.e., low stoichiometry, less susceptibility in positive ion mode, and low abundance in biological sample. To overcome these bottlenecks, diverse techniques (e.g., SCX, HILIC, ERLIC, IMAC, TiO₂, etc.) are continuously developed for on-/off-line enrichment of phosphorylated protein (or peptide) from biological samples, thereby helping qualitative/quantitative determination of phosphorylated protein and its phosphorylated sites. In this review, we introduce to the overall views of enrichment tools that are universally used to selectively isolate targeted phosphorylated protein (or peptide) from ordinary ones before MS-based phospoproteomic analysis.

• Applied Chemistry for Engineering
• /
• v.9 no.1
• /
• pp.121-128
• /
• 1998

In fields of operating or handling a hydrogen isotope facility, and of the technology for nuclear fusion source management, gas chromatography has been used as one of the practical techniques lot separation and enrichment of hydrogen isotopic gases including tritium. Chromatographic separation experiments of the hydrogen isotope mixture (hydrogen, deuterium and tritium) were carried out by use of a commercially available gas chromatograph. An aliquot of gas sample was injected by a specially designed vacuum sampler into the stream of inert carrier gas which went through the separation column under liquid nitrogen temperature. The complete separation of hydrogen isotopic molecules was observed with an alumina adsorbent partially deactivated by coating with 10% manganese chlorine. In addition, fairly good separation conditions were obtained without any appearance of nuclear spin isomers with shorter retention time, which would be available for the practical applications of the hydrogen isotope separation and enrichment.