• 한국정보통신학회논문지
• /
• 제13권12호
• /
• pp.2671-2676
• /
• 2009

EMD(Empirical mode decomposition) 방법은 시간-주파수 분석의 새로운 방법으로 적응적이며 효율적으로 신호를 분해한다. EMD는 신호 그 자체에 의해 정의된 IMFs(Intrinsic mode functions)로 명명되는 함수의 집합으로 분해되며, 분해된 IMFs는 원신호의 고유한 속성을 보존하므로 기저함수 및 필터로 사용될 수 있다. EMD 방법에 의한 분해는 신호의 지역적인 시간 스케일 특성에 기반을 두고 있으므로 비선형(non-linear) 비정상(non-stationary) 신호처리에 적합하며 ECG와 같은 생체 신호처리에 유용하다. 본 논문은 EMD 방법을 이용하여 ECG 신호를 분해하고 분해된 신호의 특성을 이용하여 잡음 제거 필터를 구현하였다. 전통적인 저주파 필터가 퓨리에 변환을 이용하여 주파수 영역에서 신호를 해석하는 것과 달리 EMD 방법은 시간 영역에서 필터링하여 신호의 속성을 유지한다. 영상 향상의 정도를 측정하기 위한 PRMD와 SSR 평가지수를 사용하여 제안된 기법과 전통적인 저주파 필터의 결과를 비교 제시하였다.

• 태양에너지
• /
• 제4권2호
• /
• pp.43-49
• /
• 1984

Experiments were performed to study freezing on a finned vertical tube when either conduction in the solid or natural convection in a liquid controls the heat transfer. Conduction is the controlling mode when the liquid is at its fusion temperature, whereas natural convection controls when the liquid temperature is above the fusion value. The liquid was housed in a cylinderical containment vessel whose surface was maintained at a uniform, time-invariment temperature during a data run, and the freezing occurred on a finned vertical tube positioned along the axis of the vessel. The phase change medium was n-octacosan, a paraffin which freezes at about $61^{\circ}C$. For conduction-controlled freezing, the enhancement of the frozen mass due to finning is greatest when the frozen layer is thin and decrease as the layer grows thicker. The degree of enhancement is generally less than the surface area ratio of the finned and unfinned tube.

• Journal of Power Electronics
• /
• 제15권4호
• /
• pp.1054-1065
• /
• 2015

Multi-functional voltage source inverters (VSIs) have attracted increasing attention in recent years for their advantageous auxiliary services for power quality enhancement in autonomous microgrids. These types of VSIs can not only achieve a proper control scheme in autonomous mode but also cope with the prescribed power quality and stability requirements. These functionalities are integrated within the same device, thereby significantly improving the cost-effectiveness of microgrids while decreasing the investment and bulk compared with those of multiple devices with independent functionalities. Control strategies for power quality enhancement in autonomous microgrids using multi-functional VSIs are comprehensively reviewed in this paper. In addition, such VSIs are discussed in detail, and comparisons of which are also provided. Lastly, a number of future research directions for multi-functional VSIs are recommended.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.519-524
• /
• 2008

A numerical study is conducted to investigate propulsion performance enhancement based on S225 experiment case of ISL(French-German Research Institute of Saint-Louis)'s superdetonative ram accelerator. For govern equation, multi-species Navier-Stokes equation coupled with Baldwin-Lomax turbulence modeling is used. Govern equation is discretized by Roe's FDS and integrated by LU-SGS time integration. Detailed chemical reaction about $H_2/O_2/CO_2$ for high pressure is considered. $2H_2+O_2+2.5CO_2$ mixture was used for propellant gas. For the same over-driven factor, the launching speed of computation was faster than one of S225. Another configuration and condition of S225 was applied. A flame structure is very different from S225. For strong mixture case, it shows ignition by viscous effect. Acceleration and speed increment is higher than S225 computation and experiment. By using more strong mixture, propulsion performance was enhanced.

• 한국자기공명학회논문지
• /
• 제22권4호
• /
• pp.76-81
• /
• 2018

Investigation of the protein-protein interaction mode at atomic resolution is essential for understanding on the underlying functional mechanisms of proteins as well as for discovering druggable compounds blocking deleteriou interprotein interactions. Solution NMR spectroscopy provides accurate and precise information on intermolecular interactions even for weak and transient interactions, and it is also markedly useful for examining the change in the conformation and dynamics of target proteins upon binding events. In this mini-review, we comprehensively describe three unique and powerful methods of solution NMR spectroscopy, paramagnetic relaxation enhancement (PRE), pseudo-contact shift (PCS), and residual dipolar coupling (RDC), for the study on protein-protein interactions.

• 한국통신학회논문지
• /
• 제29권11C호
• /
• pp.1573-1580
• /
• 2004

본 논문은 실제 환경에서 고품질 음성 신호 취득을 위해, 적응 마이크로폰 어레이 시스템을 위한 적응 모드 컨트롤러를 제안한다. 적응 어레이 알고리즘의 올바른 동작을 위하여, 제안된 적응 모드 컨트롤러는 시간 축의 정보뿐만 아니라 공간 축의 정보를 함께 사용한다. 제안된 적응 모드 컨트롤러는 초기화 단계와 수행 단계의 두 단계로 나뉘어 동작되는데, 초기화 단계에서는 음원 위치 추정 기술이 사용되며, 수행 단계는 신호의 상관 관계 특성에 의해 동작한다. 적응 어레이 알고리즘으로는 적응 차단 행렬을 이용한 Generalized Sidelobe Canceller가 사용되었다. 제안한 적응 모드 컨트롤러는 적응 차단 행렬이 수렴되지 않은 경우에도 사용 가능하며, 기존의 전력비 방법에 비해 안정적인 성능을 나타낸다. 본 논문은 제안한 시스템을 실제 환경에서 평가하였으며, 2m 거리에 위치한 화자에 대해 13dB SINR 향상을 얻었다.

• Smart Structures and Systems
• /
• 제32권4호
• /
• pp.253-266
• /
• 2023

The time-reversal method is employed to improve the ability of pipeline defect detection, and a new approach of identifying the pipeline defect depth is proposed in this research. When the L(0,2) mode ultrasonic guided wave excited through a lead zirconate titinate (PZT) transduce array propagates along the pipeline with a defect, it will interact with the defect and be partially converted to flexural F(n, m) modes and longitudinal L(0,1) mode. Using a receiving PZT array attached axisymmetrically around the pipeline, the L(0,2) reflection signal as well as the mode conversion signals at the defect are obtained. An appropriate rectangle window is used to intercept the L(0,2) reflection signal and the mode conversion signals from the obtained direct detection signals. The intercepted signals are time reversed and re-excited in the pipeline again, result in the guided wave energy focusing on the pipeline defect, the L(0,2) reflection and the L(0,1) mode conversion signals being enhanced to a higher level, especially for the small defect in the early crack stage. Besides the L(0,2) reflection signal, the L(0,1) mode conversion signal also contains useful pipeline defect information. It is possible to identify the pipeline defect depth by monitoring the variation trend of L(0,2) and L(0,1) reflection coefficients. The finite element method (FEM) simulation and experiment results are given in the paper, the enhancement of pipeline defect reflection signals by time-reversal method is obvious, and the way to identify pipeline defect depth is demonstrated to be effective.

• ETRI Journal
• /
• 제26권3호
• /
• pp.189-194
• /
• 2004

We demonstrate a high-speed recording based on field-induced manipulation in combination with an optical reading of recorded bits on Au cluster films using the atomic force microscope (AFM) and the near-field scanning optical microscope (NSOM). We reproduced 50 nm-sized mounds by applying short electrical pulses to conducting tips in a non-contact mode as a writing process. The recorded marks were then optically read using bent fiber probes in a transmission mode. A strong enhancement of light transmission is attributed to the local surface plasmon excitation on the protruded dots.

• 제어로봇시스템학회논문지
• /
• 제20권8호
• /
• pp.828-834
• /
• 2014

This paper presents a comparison among three types of approaches to an ARC (Active Roll Control) with an AARB(Active Anti-Roll Bar) for a vehicle system. Lateral acceleration and road profile are considered as disturbance. The ARC is designed with an LQ SOF (Linear Quadratic Static Output Feedback) control, $H_{\infty}$ control and SMC (Sliding Mode Control). These approaches are compared in terms of rollover prevention and ride comfort. For comparison, Bode plot analysis based on linear model and frequency response analysis based on CarSim simulation are performed.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.1652-1655
• /
• 2008

A new high contrast LCD structure for TN mode TFT-LCD, of which the contrast ratio is 1.2 times hi gher than that of the conventional one, has been developed. The contrast ratio of TFT-LCD display can be improved by some modified materials, which like as polarizer, liquid crystal, color filter and light enhancement film. In order to know which condition can get the major contribution for the upgrade of the contrast ratio, we used Taguchi method and analyzed the contribution ratio for each composition and succeed to build up the formula of contrast ratio. From this study, we could achieve the highest CR value as 1200:1 of TN mod e TFT-LCD nowadays.