• Ocean Systems Engineering
• /
• 제4권3호
• /
• pp.185-200
• /
• 2014

The objective of the present simulations is to evaluate the applicability of the standard $k-{\varepsilon}$ turbulence model in engineering practice in the subcritical to supercritical flow regimes. Two-dimensional numerical simulations of flow around a circular cylinder at $Re=1{\times}10^5$, $5{\times}10^5$ and $1{\times}10^6$, had been performed using Unsteady Reynolds-Averaged Navier Stokes (URANS) equations with the standard $k-{\varepsilon}$ turbulence model. Solution verification had been studied by evaluating grid and time step size convergence. For each Reynolds number, several meshes with different grid and time step size resolutions were chosen to calculate the hydrodynamic quantities such as the time-averaged drag coefficient, root-mean square value of lift coefficient, Strouhal number, the coefficient of pressure on the downstream point of the cylinder, the separation angle. By comparing the values of these quantities of adjacent grid or time step size resolutions, convergence study has been performed. Solution validation is obtained by comparing the converged results with published numerical and experimental data. The deviations of the values of present simulated quantities from those corresponding experimental data become smaller as Reynolds numbers increases from $1{\times}10^5$ to $1{\times}10^6$. This may show that the standard $k-{\varepsilon}$ model with enhanced wall treatment appears to be applicable for higher Reynolds number turbulence flow.

• Journal of the Korean Wood Science and Technology
• /
• 제25권1호
• /
• pp.15-22
• /
• 1997

The effectiveness of presteaming for improving CCA treatability on refractory Japanese larch heartwood was investigated in this study. Presteaming was effective on improving treatability, and the extent of improvement was dependent on moisture contents of wood specimen and steaming conditions. Green wood showed higher average value in both preservative retention and penetration than dry wood, and steaming under pressure conditions also had higher treatability than steaming at atmospheric conditions. The degree of improvement for treatability was increased with the extension of steaming period. Treatability of dry wood pres teamed under pressure conditions more than 6 hours and green wood for 3 hours was similar to that enhanced by conventional incising. Presteaming green wood under pressure conditions more than 6 hours was more effective than conventional incising in improvement of CCA treatability, and resultant treatability satisfied a minimum value required for CCA-treated wood for being used at the regions of hazard class H3 and H4. In addition, an improvement of treatability by presteaming was due to an increase in permeability resulted from the degradation of hemicelluloses within aspirated pit membrane and cell wall, not the removal of extractives from pit membrane. The reduction in strength, measured as longitudinal compressive strength, due to pres teaming was related with the degradation of hemicelluloses, and was increased as steaming conditions were severe. The degree of strength reduction associated with presteaming treatment to obtain required treatability could be quantified from the relatively good relation between the increase in treatability and the decrease in strength.

• Applied Science and Convergence Technology
• /
• 제23권5호
• /
• pp.248-253
• /
• 2014

Air Gap Membrane Distillation (AGMD) is one of several technologies that can be used to solve problems fresh water availability. AGMD exhibits several advantages, including low conductive heat loss and higher thermal efficiency, due to the presence of an air gap between the membrane and condensation wall. A previous study by Bhardwaj found that the condensation surface properties (materials and contact angle) affected the total collected fresh water in the solar distillation process. However, the process condition differences between solar distillation and AGMD might result in different condensation phenomena. In contrast, N. Miljkovic showed that a hydrophobic surface has higher condensation heat transfer. Moreover, to the best of our knowledge, there is no study that investigates the effect of condensation surface properties in AGMD to overall process performance (i.e. flux and thermal efficiency). Thus, in this study, we treated the AGMD condensation surface to make it hydrophobic or hydrophilic. The condensation surface could be made hydrophilic by immersing and boiling plate in deionized (DI) water, which caused the formation of hydrophilic aluminum hydroxide (AlOOH) nanostructures. Afterwards, the treated plate was coated using hexamethyldisiloxane (HMDSO) through plasma-enhanced chemical vapor deposition (PECVD). The result indicated that condensation surface properties do not affect the permeate flux or thermal efficiency significantly. In general, the permeate flux and thermal efficiency for the treated plates were lower than those of the non-treated plate (pristine). However, at a 1 mm and 3 mm air gap, the treated plate outperformed the non-treated plate (pristine) in terms of permeate flux. Therefore, although surface wettability effect was not significant, it still provided a little influence.

• Journal of Gastric Cancer
• /
• 제16권2호
• /
• pp.120-124
• /
• 2016

Primary squamous cell carcinoma (SCC) of the stomach is a very rare disease. However, the pathogenesis, clinical characteristics, and prognosis of gastric SCC are controversial and remain to be elucidated. Herein, we report a case of primary gastric SCC of the remnant stomach after subtotal gastrectomy. A 65-year-old man was admitted to our hospital due to epigastric discomfort and dizziness. He had undergone subtotal gastrectomy 40 years previously for gastric ulcer perforation. Endoscopy revealed a normal esophagus and a large mass in the remnant stomach. Abdominal computed tomography revealed enhanced wall thickening of the anastomotic site and suspected metachronous gastric cancer. Endoscopic biopsy revealed SCC. Total gastrectomy was performed with Roux-en-Y esophagojejunostomy. A 10-cm tumor was located at the remnant stomach just proximal to the previous area of anastomosis. Pathologic examination showed well-differentiated SCC extended into the subserosa without lymph node involvement (T3N0M0). The patient received adjuvant systemic chemotherapy with 6 cycles of 5-FU and cisplatin regimen, and he is still alive at the 54-month follow-up. According to the treatment principles of gastric cancer, early detection and radical surgical resection can improve the prognosis.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년도 제31회 추계학술대회논문집
• /
• pp.299-304
• /
• 2008

이차유동이 없는 초음속 디퓨져를 사용하는 고도모사용 지상시험장치의 주요 형상변수인 디퓨져 팽창비 최적설계를 위해 시동특성 측면에서 수치해석을 수행하였다. 기수행 연구에서 검증된 1차원 설계와 실험 결과와의 시동압력 차이 20$\sim$25%를 적용해, 본 연구에서는 최대추력노즐 사양에 대해 시동 가능한 디퓨져 팽창비$(A_d/A_t)$ 범위를 예측했다. 이 구간에서 팽창비 증가에 따른 진공챔버압력의 변화는 미미했으며, 실제 로켓모터의 시동여부 및 연소에 의한 유동정상화 시간을 고려해 팽창비가 결정되었다. 또한, 역설계를 통해 디퓨져 특성곡선을 그려본 결과, 최소(최적) 시동압력은 40기압으로 1차원 설계에 20%를 적용한 시동압력 39.6기압과 거의 일치하는 것으로 나타났다.

• 설비공학논문집
• /
• 제28권6호
• /
• pp.224-231
• /
• 2016

When aiming to reduce the low frequency noise of a subway guest room through sound absorbing treatment methods inside the wall of a tunnel the resonator is often more effective than a porous sound absorbing material. Therefore, the perforated panel type resonator embedded with a perforated panel is proposed. The perforated panel is installed in the neck, which is then extended into the resonator cavity so that it can ensure useful volume. The absorption performance of the perforated panel type of resonator is obtained by acoustic analysis and experiment. The analytical results are in good agreement with the experimental results. In the case of multiple perforated panel type resonators, as the number of perforated panels increase, the 1st resonance frequency is moved to a low frequency band and sound absorption bandwidth is extended on the whole. In order to obtain excellent absorption performance, the impedance matching between multi-panels should be considered. When the perforated panel in the resonator is combined with a porous material, the absorption performance is highly enhanced in the anti-resonance and high frequency range. In case of the resonator inserted with perforated panels of 2, the 2nd resonance frequency is shifted to a low frequency band in proportion to the distance between perforated panels.

• Journal of Plant Biology
• /
• 제35권2호
• /
• pp.107-116
• /
• 1992

큐티클리층이 제거된 해바라기(Helianthus annuus L.) 하배축 절편의 오옥신(IAA, $10\;\mu\textrm{M}$) 유도 신장 반응에 있어서 RNA, 단백질 합성 및 세포벽으로의 $H^{+}$ 방출과의 관계에 대해 조사하였다. 하배축의 표피조직 바깥에 있는 큐티클층은 실험에 사용하는 여러 가지 대사억제제에 대해 어느 정도 불투과성 장벽으로 작용하여 억제제의 효과를 저하시키지만, 곱게 간 석영사로 하배축 절편을 문질러서 큐티클리층을 제거하였을 때 억제제들의 효과는 현저하게 증가하였다. 단백질 합성 억제제인 cycloheximide (CHI, $10\;\mu\textrm{M}$)는 5분 정도의 지연시간 뒤에 IAA유도 신장반응을 억제하기 시작하였으며, 신장 반응 4-5분 전(IAA처리 10분 뒤)에 처리하였을 때 IAA에 의한 신장반응을 완벽하게 억제하였다. 그러나 신장률이 정상상태를 유지하고 있는 IAA처리 60분 뒤에 CHI를 처리하였을 때는 신장률이 0에 이르기까지 60분 이상이 걸렸다. RNA합성 억제제인 cordycepin(COR, $200\;\mu\textrm{M}$)은 IAA보다 5분 먼저 처리하였을 때 신장반응을 완전히 억제하였으며, 정상상태의 신장을 완전히 억제하는 데는 70분 이상이 걸렸다. 원형질막 $H^{+}-ATPase$의 활성을 저해하는 vanadate(1 mM)는 IAA유도 신장과 세포벽으로의 $H^{+}$ 방출을 통한 배양액의 산성화를 모두 억제하였다. 또한 CHI는 완벽하게 COR 역시 현저하게 IAA에 의한 $H^{+}$ 방출을 억제하였다. 그러나 산성용액속에서, CHI에 의한 IAA 유도 신장의 억제가 다시 회복되지 않는 것으로 보아 CHI가 단순히 세포벽의 산성화를 억제하여 신장을 저지하는 것 같지는 않다. 이상의 결과에서 해바라기 하배축의 IAA유도 신장 반응의 시작과 세포벽으로의 $H^{+}$ 방출에는 단백질(생장제한 단백질)의 합성이 필요하며 이 단백질은 신장이 시작하기 전에는 존재하지 않고 IAA에 의한 신장 반응 및 분전에 새로 합성됨을 추측할 수 있다. 그리고 COR이 IAA 유도 신장을 억제한다는 것은 IAA에 의한 생장제한 단백질의 합성이 RNA합성 수준에서 이루어진다는 것을 의미한다. 또한 신장 반응에는 세포벽으로의 $H^{+}$ 방출이 필요하나 이는 단순히 세포벽의 산성화를 통한 산성생장의 원인이 되는 것 같지는 않다.

• Korean Chemical Engineering Research
• /
• 제47권4호
• /
• pp.418-423
• /
• 2009

유기발광다이오드(OLED)에서 정공 주입층(hole injection layer, HIL)으로 사용되는 poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate)(PEDOT:PSS)에 관능성기가 치환된 MWCNT(multi-wall carbon nanotube)를 도입하여 PEDOT:PSS-MWCNT 나노 복합재 박막을 제조하였다. PEDOT:PSS-MWCNT 박막 층은 ITO 유리 위에 스핀 코팅되어 제조하였으며 FT-IR과 UV-Vis 및 SEM을 이용하여 박막의 투과도 및 개질된 MWCNT 함량에 따른 박막의 모폴로지 특성을 관찰하였다. 또한, ITO/PEDOT:PSS-MWCNT/NPD/$Alq_3$/Al 다층 소자를 제조하여 J-V 및 L-V 특성을 고찰하였다. 산 처리에 의해 관능성기가 도입된 MWCNT는 PEDOT:PSS 용액 내에서 분산성이 확인되었으며, 제조된 박막은 우수한 투과도 특성을 보였다. 다층 소자 특성에서 PEDOT:PSS 층에 개질된 MWCNT 도입으로 MWCNT의 함량이 증가함에 따라 다층 소자의 전류 밀도가 증가됨을 확인하였고, 반면에 소자의 휘도는 급격히 감소하는 특성을 보였다. 이것은 MWCNT에 의하여 전하 이동은 수월하게 하였으나 MWCNT가 가지는 정공을 가두는 성질에 의해 정공 이동도가 저하되었기 때문인 것으로 판단된다.

• Journal of Periodontal and Implant Science
• /
• 제38권1호
• /
• pp.7-14
• /
• 2008

Purpose: Chitosan & chitosan derivative(eg. membrane) have been studied in periodontal regeneration, and recently many studies of chitosan have reported good results. If chitosan's effects on periodontal regeneration are enhanced, we can use chitosan in many clinical and experimental fields. For this purpose, this study reviewed available literatures, evaluated comparable experimental models. Materials and Methods: Ten in vivo studies reporting chitosan's effects on periodontal tissue regeneration have been selected by use of the 'Pubmed' and hand searching. Results: 1. In Sprague Dawley rat calvarial defect models, amount of newly formed bone in defects showed significant differences between chitosan/chitosan-carrier/chitosan-membrane groups and control groups. 2. In beagle canine 1-wall intrabony defect models, amount of new cementum and new bone showed significant differences between chitosan/chitosan-membrane groups and control groups. The mean values of the above experimental groups were greater than the control groups. Conclusion: The results of this study have demonstrated that periodontal regeneration procedure using chitosan have beneficial effects, which will be substitute for various periodontal regenerative treatment area. One step forward in manufacturing process of chitosan membrane and in use in combination with other effective materials(eg. bone graft material or carrier) may bring us many chances of common use of chitosan in various periodontal area.

• 한국미생물·생명공학회지
• /
• 제50권2호
• /
• pp.211-217
• /
• 2022

차아염소산나트륨(NaClO)은 병원 및 식품산업 분야에서 널리 사용되는 소독제로 세균, 곰팡이, 바이러스에 대해서도 항균 활성이 있다. 차아염소산나트륨의 항균 활성은 용액의 pH에 의해 조절되는 안정적인 HClO 농도의 유지에 있다. 차아염소산(HClO)은 화학적으로 중성이므로 세균의 막에 쉽게 침투할 수 있으며 차아염소산나트륨의 항균 활성은 차아염소산염 이온(ClO^-)보다는 용액 내 HClO 농도에 의존하리라 사료된다. 본 연구에서 pH 조절에 따른 차아염소산나트륨의 항균 활성을 time kill test와 차아염소산나트륨 처리 전후의 활성산소종(ROS) 및 ATP 농도 변화로 조사하였다. 또한 전계방출형 주사 전자 현미경(FE-SEM)을 통하여 세포벽의 파괴정도를 확인하였다. pH 5 조건에서 5 ppm 차아염소산나트륨은 Escherichia coli (E. coli), Staphylococcus aureus (S. aureus) 균에 대하여 99.9%의 항균 활성을 나타내었고, ROS 생성량은 pH 7 조건보다 48% 증가하였다. 또한, pH 5 조건의 차아염소산나트륨에 노출된 E. coli와 S. aureus의 ATP 농도가 각각 94%와 91% 감소하였다. FE-SEM 결과, pH 5 조건에 노출된 균의 세포벽이 파괴된 것을 확인하였다. 본 연구결과를 종합해보면, pH를 조절하는 것 만으로 5 ppm 농도의 차아염소산나트륨의 항균 활성을 향상시킬 수 있음을 시사한다.