• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2006년도 전기학술대회논문집
• /
• pp.263-264
• /
• 2006

On this study the performance of engineering workstation running OpenGL based application The following instructions are enhanced by configuring of the microprocessor and main memories. Single processors and more main memories are better than dual and less or same is confirmed.

• Journal of Advanced Marine Engineering and Technology
• /
• 제30권2호
• /
• pp.311-318
• /
• 2006

In this study, the performance tests for single and dual micro processor configurations are performed to investigate how the accelerated OpenGL components and applications are dependent on processor configurations. At present, many major providers of the engineering graphics workstations have recommended that multiprocessors are better than single processor. However, we confirmed that the single processor configuration is more faster and more effective than competitive configurations and suggested the economic method to improve the performance of the engineering graphics workstations.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 1997년도 춘계 학술대회 발표집
• /
• pp.81-85
• /
• 1997

In a virtual environment, agents must demonstrate some degree of realism and interactivity. This paper discusses the algorithm that enables agents to navigate a virtual road network realistically and interactively. The road description files written in this language provide the information of road environments to the navigating agents and the scene visualizer. We call this navigating agent in the road an ambient car. The ambient cars must follow the traffic rules as human does. To do this, the ambient car should continuously check its circumstances, such as, the traffic lights, lanes, road signs, and other ambient cars. Because of the huge scale of road network and the large number of ambient cars, the algorithm considers only the area where the participant is currently located. By this locality, the performance of the whole system does not fluctuate much in different situations. The behavior of ambient cars according to the predefined rules may appear monotonous. We added probability distribution functions to introduce some randomness. We implemented the above idea on silicon Graphics Indigo 2 workstation. The ambient car exhibited its awareness of lanes, traffic lights, and other cars. The participants could hardly distinguish between a human-controlled car and computer-controlled ambient car generated by the algorithm.

• 한국컴퓨터그래픽스학회논문지
• /
• 제1권2호
• /
• pp.269-272
• /
• 1995

본 논문에서는 자연지형의 3차원 투사도 제작기술에 비행기의 비행조건을 고려하여 개발한 비행 시뮬레이터에 대하여 설명하고자 한다. 여기서 발표하고자 하는 비행 시뮬레이터란 3차원의 자연지형을 마치 비행기를 타고가며 보는 것과 같은 효과를 낼 수 있게 하는 시스템을 말한다. 본 시스템은 사용자의 편의성을 도모하기 위하여 Sun workstation (SPARC 10)상에서 X11R5와 Motif 그리고 C언어를 이용하여 개발되었으며, 사용자가 비행경로, 비행속도, 비행고도 등의 비행 파라메타들을 마우스를 이용하여 손쉽게 입력할 수 있도록 구성되어 있다.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2008년도 춘계학술논문발표회 논문집
• /
• pp.214-217
• /
• 2008

An fire simulator has been developed for examining possibility of future engineering applications in the fire research field. This system composed of workstation on XP OS and HMD(Head Mounted Display) and visualized 3D walk-through type virtual reality graphics inside a tunnel in case of fire. By using a joystick and a viewpoint tracer, subjects can be experience interactive changes occurred both in graphics and surrounding sound.

• 대한원격탐사학회지
• /
• 제10권2호
• /
• pp.121-132
• /
• 1994

A GIS based tactical terrain analysis system named ATTAS(Army Tactical Terrain Analysis Software) has been designed and implemented to support the field commanders for enhancing the capabiliy of their unit and efficiency of weapon system. This system is designed to provide computer graphics environment in which the analyst can interactively operate the entire analyzing process such as selecting the area of interest, performing analysis functions, simulating required battlefield operation and display the results. This system can be divided into three major sections; the terrain analysis modules, utilites, and graphic editor. The terrain analysis module inclused surface analysis, line of sight analysis, enemy disposition, 3D display, radar coverage, logistic route analysis, shortest path analysis, atmospheric phenomena prediction, automated IPB (Inteligence preparation of Battlefield), and other applied analysis. A combination of 2D and 3D computer graphics techniques using the X-window system with OSF/Motif in UNIX workstation was adopted as the user interface. The integration technique of remotely sensed images and GIS data such as precision registration, overlay, and on-line editing was developed and implemented. An efficient image and GIS data management technique was also developed and implemented using Oracle Database Management System.

• 한국CDE학회논문집
• /
• 제5권4호
• /
• pp.327-335
• /
• 2000

The spent fuel rod extracting machine is automatically operated in high radioactive environment, so high reliability of operation is required. In this paper, to enhance the reliability of this machine by providing a close monitoring capability. a real time graphic simulation method is suggested. This method utilizes conventional IGRIP (Interactive Graphics Robot Instruction Program) 3D graphic simulation tool to visualize and simulate the 3D graphic model of this machine. Also, the dedicated protocol is defined for transmission of the operational data of the machine. The real time graphic simulation is realized by developing the socket module between a graphic workstation and a machine control computer through the TCP/IP network and by dividing the 3D graphic simulation GSL(Graphic Simulation Language) program as a small sized sub routine. The suggested method is implemented while automatically operating the rod extracting machine. The result of implementation shows that the real time 3D graphic simulation is well synchronized with the actual machine according to the operational data.

• International Journal of Precision Engineering and Manufacturing
• /
• 제2권2호
• /
• pp.38-47
• /
• 2001

This paper decribes the development of computer-aided design of a very precise progressice die for lead frame of semiconductor chip. The approach to the system is based on knowledgr-based rules. Knowledge of fie이 experts. This system has been written in AutoLISP using AutoCAD ona personal computer and the I-DEAS drafting programming Language on the I-DEAS mater series drafting with on HP9000/715(64) workstation. Data exchange between AutoCAD and I-DEAS master series drafting is accomplished using DXF(drawing exchange format) and IGES(initial graphics exchange specification) files. This system is composed of six main modules, which are input and shape treatment, production feasibility check, strip layout, data conversion, die layout, and post processing modules. Based on Knowledge-based rules, the system considers several factors, such as V-notches, dimple, pad chamfer, spank, cavity punch, camber, coined area, cross bow, material and thickness of product, complexities of blank geometry and punch profiles, specifications of available presses, and the availability of standard parts. As forming processes and the die design system using 2D geometry recognition are integrated with the technology of process planning, die design, and CAE analysis, the standardization of die part for lead frames requiting a high precision process is possible. The die layout drawing generated by the die layout module s displayed in graphic form. The developed system makes it possible to design and manufacture lead frame of a semiconductor more efficiently.

• 한국정밀공학회지
• /
• 제16권6호
• /
• pp.123-132
• /
• 1999

This paper describes a research work of developing computer-aided design of lead frame, semiconductor, with blanking operation which is very precise for progressive working. Approach to the system is based on the knowledge-based rules. Knowledge for the system is formulated from pasticity theories, experimental results and the empirical knowledge of field experts. This system has been written in AutoLISP on the AutoCAD using a personal computer and in I-DEAS Drafting Programming Language on the I-DEAS Master Series Drafting with Workstation, HP9000/715(64). Transference of data between AutoCAD and I-DEAS Master Series Drafting is accomplished by DXF(drawing exchange format) and IGES(initial graphics exchange specification) methods. This system is composed of five modules, which are input and shape treatment, production feasibility check, strip-layout, data-conversion and die-layout modules. The process planning and Die design system is designed by considering several factors, such as complexities of blank geometry, punch profiles, and the availability of a press equipment and standard parts. This system provides its efficiecy for strip-layout, and die design for lead frame, semiconductor.

• 한국정밀공학회지
• /
• 제10권3호
• /
• pp.161-167
• /
• 1993

This paper deals with a new method for the machining of a die cavity defined by sculptured surfaces. In machining die cavities or pockets, process planners have been faced with some troulbes. One of the troubles ius to rebove a great deal of material within a given boundary while avoiding cutter interference. Cutter interference is a ciritical problem in NC machining of a die cavity. Even though this cavity machining has been implemented in many CAM systems, most of them can handle limited shapes of cavities or pockets. In this paper, a procedure has been developed to machine die cavity or pocket of a sculptured surface. The offset surfaces of the part surfaces and boundary surfaces are determined to calculate the intersection curves. These intersection curves form a FACE on the part surface, and the interference free tool pathe is generated by eliminating the points outside the FACE when computing the cutter contact (CC) data. Additionally, the cutter location (CL) data obtained from the CC data convert to an NC data. The NC data generated through this algorithm are verified on the CINCINNATI milling machine. A propotype die cavity machining system has been implemented in FORTRAN language and FIGARO graphics library on IRIS workstation.