• KIPS Transactions on Software and Data Engineering
• /
• v.2 no.1
• /
• pp.7-18
• /
• 2013

These days, the teaching and learning system has been increasing for the rapid advancement of the information technologies. We can access education systems of good quality anytime, anywhere and we can use the individually personalized teaching and learning system depending on developing the wireless communication technology and the multimedia processing technology. The more the various systems develop, the more software security systems become important. There are a lot kind of fault analysis methods to evaluate software security systems. However, the only assessment method to evaluate software security system is not enough to analysis properly on account of the various types and characteristic of software systems by progressing information technology. Therefore, this paper proposes an integrative method of Fault Tree Analysis (FTA) and Fault Modes and Effect Analysis(FMEA) to evaluate the security of e-teaching and learning system as an illustration.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.1
• /
• pp.470-476
• /
• 2019

The braking force for a train is generally provided by compressed air. The pressure valve system that is used to apply appropriate braking forces to trains has a complex flow circuit. It is possible to make a channel shape that can increase the flow efficiency by 3D printing. There are restrictions on the flow shape design when using general machining. Therefore, in this study, the compressed air flow was analyzed in a pressure valve system by comparing flow paths made with conventional manufacturing methods and 3D printing. An analysis was done to examine the curvature magnitude of the flow path, the diameter of the flow path, the magnitude of the inlet and reservoir pressure, and the initial temperature of the compressed air when the flow direction changes. The minimization of pressure loss and the uniformity of the flow characteristics influenced the braking efficiency. The curvilinear flow path made through 3D printing was advantageous for improving the braking efficiency compared to the rectangular shape manufactured by general machining.

• Healthcare Informatics Research
• /
• v.24 no.4
• /
• pp.359-370
• /
• 2018

Objectives: We assessed the public acceptance of a health information exchange (HIE) and examined factors that influenced the acceptance and associations among constructs of the Technology Acceptance Model (TAM). Methods: We collected data from a survey of 1,000 individuals in Korea, which was administered through a structured questionnaire. We assessed the validity and reliability of the survey instrument with exploratory factor analysis and Cronbach's alpha coefficients. We computed descriptive statistics to assess the acceptance and performed regression analyses with a structural equation model to estimate the magnitude and significance of influences among constructs of TAM. Results: Eighty-seven percent of the respondents were willing to use the technology, and the average level of agreement with the need for the technology was 4.16 on a 5-point Likert scale. The perception of ease of use of the technology significantly influenced perceptions of usefulness and attitudes about the need for HIE. Perceptions of usefulness influenced attitude and behavioral intention to use HIE, and attitude influenced intention. Age showed a wide range of influences throughout the model, and experience with offline-based information exchange and health status also showed noteworthy influences. Conclusions: The public acceptance of HIE was high, and influences posited by TAM were mostly confirmed by the study results. The study findings indicated a need for an education and communication strategy tailored by population age, health status, and prior experience with offline-based exchange to gain public buy-in for a successful introduction of the technology.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.2
• /
• pp.638-643
• /
• 2019

In order to reduce the cost and weight of the soft-foamed instrument-panel (IP), it was developed the new IP which is made by the two kinds of injection methods. One is the compression-injection with back-foamed foil inserted, and the other is two-shot injection with the passenger airbag door. We named it 'IMX-IP' which means that all components ('X') of the IP with different resins are made in a mold. The development procedure of this technology was introduced (1) Design of the new injection mold through TRIZ method, (2) Optimization of the injection conditions and back foamed-foil for minimizing the foam loss and thickness deviation, (3) Development of CAE for two-shot injection compression, (4) Reliability performance test and application to the mass production. The reduction of the processes through the two-shot injection with back foamed-foil inserted made it possible to enhance soft feeling on IP and reduce the cost and weight simultaneously.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.29 no.2
• /
• pp.259-269
• /
• 2019

Objective: This study was conducted to prepare fundamental data and assess the relationship between level of exposure to airborne respirable dust, chest radiation findings, and the results of pulmonary function tests among workers in a cloth manufacturing factory. Methods: The number of total subjects was 144 (124 female and 20 male) workers in a cloth manufacturing factory in the city of Busan. This study measured the concentration of airborne respirable dust by gravimetric analysis and performed pulmonary function testing, and got chest radiation findings from December 1, 2016 to March 31, 2017. Collected data was analyzed using the IBM SPSS statistical package program (ver. 24.0). Results: The mean concentration of respirable dust was the highest in the cutting process. The effecting factors on $FEV_1/FVC$ were age, sex, and working process. The effecting factors on chest radiation findings were doing no exercise and concentration of respirable dust. Conclusions: Based on the above results, the authors consider there to be a need to secure sufficient working space and improve the engineering systems, for example the overall or local ventilation, in order to minimize the exposure to respirable dust. Health education and health promotion activities should also be improved in order to maintain optimal health status. The authors expect further studies to be performed on pulmonary function testing, chest radiation findings, and symptoms related to pulmonary function, including continuous observation, among workers in a cloth manufacturing factory.

• Molecules and Cells
• /
• v.42 no.1
• /
• pp.87-95
• /
• 2019

Long interspersed element-1 (LINE-1 or L1) is an autonomous retrotransposon, which is capable of inserting into a new region of genome. Previous studies have reported that these elements lead to genomic variations and altered functions by affecting gene expression and genetic networks. Mounting evidence strongly indicates that genetic diseases or various cancers can occur as a result of retrotransposition events that involve L1s. Therefore, the development of methodologies to study the structural variations and interpersonal insertion polymorphisms by L1 element-associated changes in an individual genome is invaluable. In this study, we applied a systematic approach to identify human-specific L1s (i.e., L1Hs) through the bioinformatics analysis of high-throughput next-generation sequencing data. We identified 525 candidates that could be inferred to carry non-reference L1Hs in a Korean individual genome (KPGP9). Among them, we randomly selected 40 candidates and validated that approximately 92.5% of non-reference L1Hs were inserted into a KPGP9 genome. In addition, unlike conventional methods, our relatively simple and expedited approach was highly reproducible in confirming the L1 insertions. Taken together, our findings strongly support that the identification of non-reference L1Hs by our novel target enrichment method demonstrates its future application to genomic variation studies on the risk of cancer and genetic disorders.

• Journal of Environmental Health Sciences
• /
• v.45 no.1
• /
• pp.42-53
• /
• 2019

Objectives: The Yongpung reservoir in Korea is a crucial facility that supplies water to farms in its surrounding $2km^2$ area. However, its water quality is not suited to the needs of current residents who wish for the availability of environmentally friendly agricultural products and desire to use the waterfront area. The aim of this research was to evaluate the reservoir's fish and benthic macroinvertebrate distributions and determine its water quality and the heavy metal content in its sediment. This basic data can be used to establish environmentally protective plans for the Yongpung reservoir. Methods: Six sites were selected for analysis in this investigation. Three points (YP-1, YP-2, and YP-3) were evaluated for water quality and metal content in sediments; they were located upstream, midstream, and downstream of the reservoir. Samplings of the fish and benthic macroinvertebrate populations were performed at three other sites: St. 1, St. 2, and St. 3. Results: Based on chemical oxygen demand (COD) and total nitrogen (T-N) data, the quality of the Yongpung reservoir water corresponds to Class VI (very poor) according to Korea's lake environmental standards. The lead levels measured in the sediment at the midstream and downstream points of the reservoir were 76.7 and 72.7 mg/kg, respectively, while 8 orders, 15 families, and 16 species of benthic macroinvertebrates were identified in the reservoir. The ecological score of the benthic macroinvertebrate community (ESB) was between 8 and 23, denoting poor to very poor environmental conditions. Further, 4 families and 7 species of fish were identified in the reservoir, with Cyprinidae accounting for 94.3% of all observed freshwater fish. Conclusion: Based on these findings, we conclude that management plans, including the removal of lead from the sediment, are necessary to improve the quality of the agricultural water in this reservoir. The T. japonica, which cover almost 30% of the water area, must also be removed.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.2
• /
• pp.157-167
• /
• 2021

Despite the importance of information technology, research on information-oriented performance management and performance management methods are very insufficient. In this paper, the SSU-ITPM model, a company-wide informatization performance evaluation and management model that reflects the characteristics of the shipbuilding and marine industry with high cooperative and process complexity, was presented. This model consisted of informatization planning and project management, informatization field utilization evaluation, informatization utilization quality evaluation, informatization user satisfaction evaluation, and informatization effect achievement evaluation. In addition, through the application of Company D, the feasibility of practical application of the model was confirmed. This study is expected to provide a practical reference model for informatization performance management of ETO plant-based companies such as the shipbuilding and offshore sector.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.34 no.3
• /
• pp.19-28
• /
• 2018

Key factors that ensure competitiveness of modular unit include consistent high quality and connection condition that ensures high structural performance while minimizing the overall scale of the on-site process. However, it is difficult to evaluate the structural performance of the connection of modular unit, and its structural analysis and design method can be different depending on the connection to its development, which affects the seismic performance of its final design. In particular, securing the seismic performance is the key to designing modular systems of mid-to-high-rise structure. In this paper, therefore, the seismic performance of the modular system with bracket-typed fully restrained moment connections according to stiffness and the shapes of various connection members was evaluated through experimental and analytical methods. To verify the seismic performance, a cyclic loading test of the connection joint of the proposed modular system was conducted. As a result of this study, theoretical values and experimental results were compared with the initial stiffness, hysteresis behavior and maximum bending moment of the modular system. Also, the connection joint was modeled, using the commercial program ANSYS, which was then followed by finite element analysis of the system. According to the results of the experiment, the maximum resisting force of the proposed connection exceeded the theoretical parameters, which indicated that a rigid joint structural performance could be secured. These results almost satisfied the criteria for connection bending strength of special moment frame listed on KBC2016.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.34 no.4
• /
• pp.25-33
• /
• 2018

In regard to modular systems, new methods, as well as middle and high-story unit design ideas, are currently being studied. These studies need to focus on the enhanced stiffness and seismic performance of these connections, and see that the development of fully restrained moment connections can improve the seismic performance. For this reason, this study evaluates the performance of the connections of the ceiling bracket-typed modular system through repeated loading tests and analyses. In order to compare them with these modular units, new unit specimens with the bracket connection being different from that of the traditional modular unit specimens were designed, and the results of repeated loading tests were analyzed. In the traditional units, the structural performances of both welding connection and bolt connection were evaluated. In regard to the testing results, the initial stiffness of the hysteresis curve was compared with the theoretical initial stiffness, and the features of all specimens were also analyzed with regard to the maximum moment. In addition, the test results were examined with regard to the connection flexural strength of the steel special moment frame specified under the construction criteria KBC2016. The connections, which were proposed in the test results, were found to be fully restrained moment connections for designing strong column-weak beams and meeting the requirements of seismic performance of special moment frames.