• Korean Journal of Construction Engineering and Management
• /
• 제7권5호
• /
• pp.159-166
• /
• 2006

It was found that Korean Standard of Estimate which has been used as the only basis of cost estimate of public construction projects had some side effects such as jerry-build construction and over-estimation because it failed to reflect the current price and the state-of-the-art construction methods in a changing construction environment. Therefore, the government decided to gradually introduce historical construction cost into cost estimate of public construction projects from 2004. This paper presents analytic criteria and a process model for deducing more current and reasonable historical construction cost for contract items from not only previous contract prices but also all of the other bid prices that were not contracted. The procedure of estimating actual unit cost proposed in this paper focuses on the removal of abnormal values including strategically too low or high prices and the time correction. In addition, basic research is conducted for the correction of actual unit cost through the analysis of fluctuation of bid price depending on bidding types and rates of successful bid. It is anticipated that the effective use of the proposed process model for estimating actual unit cost would make the cost estimation more current and reasonable.

• Journal of the Earthquake Engineering Society of Korea
• /
• 제10권3호
• /
• pp.101-111
• /
• 2006

This paper proposes a method for modeling new fault ground motion due to moderate size earthquakes in Stable Continental Regions (SCRs) for the first time. The near fault ground motion is characterized by a single long period velocity pulse of large amplitude. In order to model the velocity pulse, its period and peak amplitude need be determined in terms of earthquake magnitude and distance from the causative fault. Because there have been observed very few new fault ground motions, it is difficult to derive the model directly from the recorded data in SCRs. Instead an indirect approach is adopted in this work. The two parameters, the period and peak amplitude of the velocity pulse, are known to be functions of the rise time and the slip velocity. For Western United States (WUS) that belongs active tectonic regions, there art empirical formulas for these functions. The relations of rise time and slip velocity on the magnitude in SCRs are derived by comparing related data between Western United States and Central-Eastern United States that belongs to SCRs. From these relations, the functions of these pulse parameters for NFGM in SCRs can be expressed in terms of earthquake magnitude and distance. A time history of near fault ground motion of moderate magnitude earthquake in stable continental regions is synthesized by superposing the velocity pulse on the for field ground motion that is generated by stochastic method. As an demonstrative application, the response of a single degree of freedom elasto-plastic system is studied.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• 제43권12호
• /
• pp.53-60
• /
• 2006

Handover of WiBro is based on 802.16e hard handover scheme. When PSS is handover, it is handover that confirm neighbor's cell condition and RAS ID in neighbor advertisement message. Serving RAS transmits HO-notification message to neighbor RAS. Transmiting HO-notification message to neighbor RAS, it occurs many signaling traffics. Also, When WiBro is handover, It occurs many packet loss. Therefore, user suffer service degradation. LPM handover is supporting seamless handover because it buffers data packets during handover. So It is proposed scheme that predicts is LPM handover and reserves target RAS with pre-authentication. These schemes occur many signaling traffics. In this paper, we propose PSS Movement Prediction to solve signaling traffic. Target RAS is decided by old data in history cache. When serving RAS receives HO-notification-RSP message to target RAS, target RAS inform to crossover node. And crossover node bicast data packet. If handover is over, target RAS forward data packet. Therefore, It reduces signaling traffics but increase handover success rate. When history cache success, It decrease about 48% total traffic. But When history cache fails, It increase about 6% total traffic

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• 제6권1호
• /
• pp.73-87
• /
• 1996

The mechanical properties of 2D ceramic composites fabricated bythe newly developed powder infiltration and subsequent multiple impregnation process were characterised by both 3-point flexure and tensile tests. These tests were performed with strain gauge and acoustic emission instrument. The woven fabric composites used for the test have the basic combinations of $Al_{2}$$O_{3}$ fabric/$Al_{2}$$O_{3}$ and SiC fabric (Tyranno)/SiC. Uniaxially aligned SiC fibre(Textron SCS-6)/SiC composites were also tested for comparison, The ultimate flexural strength and first-matrix cracking stress of SiC fabric/SiC composite with 73% of theoretical density were about 300 MPa and 77 MPa respectively. However, the ultimate tensile strengths of composite were generally one third of flexural strengths, and first-matrix cracking stress in a tension test was also much lower than the value obtained from flexure test. The lower mechanical properties measured by tension test were analysed quantitatively bythe differences in stressed volume using Weibull statistics. This showed that the ultimate strength and the firs-tmatrix cracking stress of woven laminate composites were mainly determined bythe gauge length of fibres and the stressed volume of matrix respectively. Incorporation of SiC whiskers into the matrix increased first-matrix cracking stress by increasing the matrix failure strain of composites.

• Journal of the Korean Solar Energy Society
• /
• 제35권2호
• /
• pp.73-83
• /
• 2015

When it comes to these buildings for business use, cooling load during summertime was reported to have great importance which, as a result, impressively increased interest in Solar Heat Gain Coefficient (SHGC). Such SHGC is considered to be lowered with the help of colors and functions of glass itself, internal shading devices, insulation films and others but basically, these external shading devices for initial blocking that would not allow solar heat to come in from outside the buildings are determined to be most effective. Of many different external shading devices, this thesis conducted an analysis on Exterior Venetian Blind. As for vertical shading devices, previous researches already calculated SHGC conveniently using concepts of sky-opening ratios. However in terms of the Venetian Blind, such correlation is not possibly applied. In light of that, in order to extract a valid correlation, this study first introduced a concept called shape factor, which would use the breadth and a space of a shade, before carrying out the analysis. As a consequence, the concept helped this study to find a very similar correlation. Results of the analysis are summarized as follows. (1) Regarding SHGC depending on the surface reflectance of a shade, an average of 2% error is observed and yet, the figure can always be ignored when it comes to a simple calculation. (2) As for SHGC of each bearing, this study noticed deviations of 4% or less and in the end, it is confirmed that extraction can be achieved with no more than one correlation formula. (3) When only the shape factor and nothing else is used for finding a correlation formula, the formula with a deviation of approximately 5% or less is what one would expect. (4) Since the study observed slight differences in bearings depending on ranges of the shape factors, it needed to extract a weighted value of each bearing, and learned that the smaller the shape factor, the wider the range of a weighted value. The study now suggests that a follow-up research to extract a simple calculation formula by dealing with all these various inclined angles of shade, solar radiation conditions of each region (the ratio of diffuse radiation to direct radiation and others) as well as seasonal features should be carried out.

• 대한공업교육학회지
• /
• 제40권2호
• /
• pp.239-258
• /
• 2015

The purpose of this study is to provide basic data that can be used in a reasonable assessment of the learning outcomes of STEAM. It presented a learning outcome evaluation method, relative weights of key competencies standard that a learner should cultivate. For this study, a pairwise comparison questionnaire about the key competencies was conducted on the STEAM professionals, and AHP was applied to analyze the priority of main factors of key competencies. The results of this study are as follows. First, the importance of capabilities of convergence accomplishment and capabilities of convergent cognition, in the first layer of key competencies, were 39.4% and 36.8%, respectively. In the education evaluation of the STEAM, capabilities of convergence accomplishment and capabilities of convergent cognition showed similar level of importance, and were considered more important factor than capabilities of convergence attitude (23.8%). Second, the relative importance of capabilities of problem solving (20.0%) was highest in the second layer of key competencies, and followed by capabilities of creative thinking (18.3%), responsibility (15.3%), and understanding convergence knowledge (11.0%). Third, it will be a foundation of a competency evaluation, which reasonably evaluates, based on the relative weights, whether to accomplish educational objectives of the STEAM program In addition, this results is expected to become a guide to develop an education program that can improve the teaching and learning process and raise the learning outcome, as well as an education evaluation of the STEAM.

• Journal of the Korea institute for structural maintenance and inspection
• /
• 제22권2호
• /
• pp.161-168
• /
• 2018

This study is the analytical review on the inelastic region of CRC column strength curve. The inelastic region of CRC column strength curve is based on the Bleich theory and the maximum residual stress of $0.5{\sigma}_y$. This is somewhat conservative by considering the fact that the maximum residual stress of $0.3{\sigma}_y$ is well known. This study proposes column strength curve for nonlinear behavior of hot rolled structural steel members under axial force and tangent modulus Et, with the maximum residual stress of $0.3{\sigma}_y$ and compares them with those of CRC. The stress of the inelastic column under axial compression exceeds proportional limits and reaches yielding point before applied load render the column bent. The column strength curve that depends on gradually yielding state of section needs to be reviewed. In this study, it is derived that the critical load formular according to material yielding with the maximum residual stress of $0.5{\sigma}_y$ and compared with CRC column design curve.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• 제22권3호
• /
• pp.373-391
• /
• 2011

To understand the characteristics of open access journals in Korea, this research examined the 1,438 KCI journals in the fields of humanities, social sciences, natural sciences, engineering, medicine, agriculture & oceanography, art & sports, and interdisciplinary. 21% of the KCI journals are freely available at the publisher's websites or open access DBs(OA). 34% are available only in the commercial fulltext DBs(TA) and 34% combined TA and OA. 48% of the OA journals can be found on the free fulltext DBs and 52% are accessed on the publisher's websites. OA journals in humanities and social science are available mainly on the publisher's websites. As compare with this, OA journals of STM fields are available via the free fulltext DBs. Medicine(30%) and social sciences(25%) have the highest overall share of OA. There are field differences in the rate of OA journals. In the fields of social sciences and humanities, 15% of the journal are open access. In case of medicine field, 60% are open access journals. OA journals in natural science and engineering are each 33% and 24%.

• Journal of Aerospace System Engineering
• /
• 제15권5호
• /
• pp.24-32
• /
• 2021

Personal Air Vehicle (PAV), Cargo UAS (Cargo UAS), and existing manned and unmanned aircraft are key vehicles for urban air mobility (UAM), and should demonstrate compatibility for the design of aircraft systems. The safety assessment required by for certification to ensure safety and reliability should be systematically performed throughout the entire cycle from the beginning of the aircraft development process. However, with the increasing complexity of safety critical aviation systems and the application of state-of-the-art systems, conventional experience-based and procedural-based safety evaluation methods make ir difficult to objectively assess safety requirements and system safety. Therefore, Model-Based Safety Assessment (MBSA) using modeling and simulation techniques is actively being studied at domestic and foreign countries to address these problems. In this paper, we propose a Model-Based Safety Evaluation framework utilizing modeling and simulation-based integrated flight simulators. Our case studies on the Traffic Collision Availability System (TCAS) and Wheel Brake System (WBS) confirmed that they are practical for future safety assessments.

• Journal of Practical Engineering Education
• /
• 제13권2호
• /
• pp.221-232
• /
• 2021

The purpose of this study is to explore the design direction of artificial intelligence convergence liberal arts subjects based on flip learning and maker education through analysis of learner needs in a non-face-to-face classroom environment caused by COVID-19. To this end, we analyzed the priorities of subject content elements by using the Borich needs assessment and The Locus for Focus model along with students' perceptions of flip learning for students who took and did not take maker education-based liberal arts courses. Based on this, it was used as basic data for designing the curriculum. The study results are as follows. First, the content elements of the artificial intelligence liberal arts curriculum based on maker education consisted of a total of 9 areas and were designed as a class using flip learning. Second, the areas with the highest demand for education are 'Artificial Intelligence Theory', 'Artificial Intelligence Programming Practice', 'Physical Computing Theory', 'Physical Computing Practice', followed by 'Convergence Project', '3D Printing Theory', '3D Printing practice' was decided. Third, most of the questionnaires regarding the application of flip learning in maker education-based artificial intelligence liberal arts subjects showed positive responses regardless of whether they took the course, and the satisfaction of the students was very high. Based on this, an artificial intelligence-based convergence liberal arts curriculum using flip learning and maker education was designed. This is meaningful in that it provides an opportunity to cultivate artificial intelligence literacy for college students by preparing the foundation for artificial intelligence convergence education in liberal arts education by reflecting the needs of students.