• 공학교육연구
• /
• 제17권4호
• /
• pp.58-61
• /
• 2014

This paper introduces a tool for effective teaching of introductory computer programming. In order for the class to be effective, we try to attain attention, relevance, confidence, and satisfaction based on Keller's ARCS model. A web-based tool is developed to help both the students and the instructors.

• 한국정밀공학회지
• /
• 제17권12호
• /
• pp.54-60
• /
• 2000

Research about tool condition monitoring has been done until now for product automation and unmaned system. But it is hard to apply it to the industrial field due to its cost and reliability. This paper presents the new method of tool wear measurement using Marpos gauge. This is a kind of touch sensor, so its cost is lower than vision system. And it is not affected by dust and illumination, which are important in vision system. This proposed method use tool clearance angle to measure flank wear. Experimental results compared with vision system shows that this method is available for tool condition monitoring system.

• 한국정밀공학회지
• /
• 제2권3호
• /
• pp.77-83
• /
• 1985

Adaptive control technique for a milling process is developed and implemented in an NC milling machine retrofitted to enable the micro-computer control. The control algorithm has the objects to guarantee the optimal tool life which can give the predetemined allowable lower limit of surface roughness. The experimental results show 1) that the extended tool life equation has good reliability in normal tool wear conditions. 2) and that the proposed adaptive control technique, which determine the optimal cutting condition by basing on the tool life equation modified continually according to the tool wear measured in real time, performs well.

• 한국정밀공학회지
• /
• 제28권3호
• /
• pp.363-369
• /
• 2011

In this study, a direct pattern forming process on a plastic film using ultrasonic vibration energy is investigated. A tool horn containing micro-patterns is attached to an ultrasonic power supply, and is used to press a plastic film with ultrasonic vibration in order to replicate micro-patterns on the surface of the plastic film. To replicate micro-patterns with high accuracy, the tool horn should be designed to allow only the longitudinal vibration, not the transverse vibration. For this purpose, the design of a tool horn is investigated through finite element analysis, from which the resulting natural frequency of the tool horn can be adjusted in the range of the ultrasonic power supply. The analysis result is then reflected on the optimal design and fabrication of the tool horn. The validity of the developed tool horn is discussed through pattern-forming experiments using the ultrasonic vibration of the developed tool horn.

• 한국정밀공학회지
• /
• 제27권9호
• /
• pp.103-110
• /
• 2010

This paper presents the optimized approximation of finite element modeling for a complex tool holder spindle using both DOE (Design of Experiment) with Optimal Latin Hypercube (OLH) method and approximation modeling method with Radial Basis Function (RBF) neural network structure. The complex tool holder is used for holding a (milling/drilling) tool of a machine tool. The engineering problem of complex tool holder results from the twisting of spindle of tool holder. For this purpose, we present the optimized approximation of finite element modeling for a complex tool holder spindle using both DOE (Design of Experiment) with Optimal Latin Hypercube (OLH) method (specifically a module of $iSight^{(R)}$ FD-3.1) and approximation modeling method with Radial Basis Function (RBF) (another module of $iSight^{(R)}$ FD-3.1) neural network structure

• 한국정밀공학회지
• /
• 제25권12호
• /
• pp.47-54
• /
• 2008

Hard turning process can be defined as a single-point machining process carried out on "hard" materials. The process is intended to replace or limit traditional grinding operations that are expensive, environmentally unfriendly, and inflexible. The purpose of this study is to achieve a systematic understanding of machining characteristics and the effects of machining parameters on cutting force, tool wear shape and chip formation by the outer cutting of a kind of wear resistant tungsten carbide V30. Hard turning experiments were carried out on this alloy using the PCD (Poly Crystalline Diamond), cBN (cubic Boron Nitride) and PcBN (Polycrystalline cubic Boron Nitride) cutting tools. The PcBN and the usual cBN tools were used to be compare with the PCD tool and the dry turning was carried out. The PcBN is attractive as the tool material which replaces the PCD. The tool wear width and cutting force were measured, and the worn tool and chip were observed. The difference of the tool wear mechanism among the three tool materials was investigated.

• Tribology and Lubricants
• /
• 제39권3호
• /
• pp.118-122
• /
• 2023

In our study, we develop a finite element model based on Archard's wear law to predict the cumulative wear and the evolution of the tool profile in friction stir welding (FSW) applications. Our model considers the rotational and translational behaviors of the tool, providing a comprehensive description of the wear process. We validate the accuracy of our model by comparing it against experimental results, examining both the predicted cumulative wear and the resulting changes to the tool profile caused by wear. We perform a detailed comparison between the predictions of the model and experimental data by manipulating non-dimensional coefficients comprising model parameters, such as element sizes and time increments. This comparison facilitates the identification of a specific non-dimensional coefficient condition that best replicates the experimentally observed cumulative wear. We also directly compare the worn tool profiles predicted by the model using this specific non-dimensional coefficient condition with the profiles obtained from wear experiments. Through this process, we identify the model settings that yield a tool wear profile closely aligning with the experimental results. Our research demonstrates that carefully selecting non-dimensional coefficients can significantly enhance the predictive accuracy of finite element models for tool wear in FSW processes. The results from our study hold potential implications for enhancing tool longevity and welding quality in industrial applications.

• 로봇학회논문지
• /
• 제19권1호
• /
• pp.65-70
• /
• 2024

Tool wear is considered an important issue in manufacturing and engineering, as worn tools can negatively impact productivity and product quality. Given that the wear status of tools plays a decisive role in the production process, measuring tool wear is a key task. Consequently, there is significant attention in manufacturing fields on the precise measurement of tool wear. Current domestic methods for measuring wear are limited in terms of speed and efficiency, with traditional methods being time-consuming and reliant on subjective evaluation. To address these issues, we developed a measurement module implementing the DeepContour algorithm, which uses image processing technology for rapid measurement and evaluation of tool wear. This algorithm accurately extracts the tool's outline, assesses its condition, determines the degree of wear, and proves more efficient than existing, subjective, and time-consuming methods. The main objective of this paper is to design and apply in practice an algorithm and measurement module that can measure and evaluate tool wear using image processing technology. It focuses on determining the degree of wear by extracting the tool's outline, assessing its condition, and presenting the measured value to the operator.

• 한국정밀공학회지
• /
• 제14권4호
• /
• pp.30-37
• /
• 1997

This thesis is concerned with the study on the characteristics of the tool failure occuring at the beginning of cutting in finish machining of hardened steels such as carbon tool steel and alloy tool steel by a ceramic tool (Al$_{2}$O$_{3}$+TiC) with nose radius. In the machining of hardened carbon steel STC3, the wear mechanism on the flank face of the ceramic tool is abrasion wear. The mode of tool failure is developed into catastropic fracture with flaking. It is thought that the fracture caused by FeO and TiO$_{2}$ results from the oxidation of Fe in the workpice and TiC in the ceramic tool and the deposit of Fe formed on the surface of the ceramic tool. In the machining of hardened alloy steel STD11, the wear mechanism on the flank face of the ceramic tool is that abrasion and adhesion wear exist simultaneously. The mode of tool failure at the beginning of cutting features is DOC notch wear. It is thought that the DOC notch wear caused by FeO and TiO$_{2}$results from the oxidation of Fe and TiC in the workpiece and ceramic tool, respectively.

• 한국정밀공학회지
• /
• 제14권8호
• /
• pp.73-81
• /
• 1997

The hard turning process defined as a single point turning of materials harder than $H_{R}$C 58 differs from conventional turning because of hardness of the work materials and cutting toos needed in the process. In hard turning, tool life is very short, of the order of a few minutes, during which the cutting tool is subjected to the extremes of stress and temperature. In this regard, it is well known that CBN tool is proper for this process in spite of expensive cost. In this research, we studied the feasibility of the use of the low cost cutting tool such as a aTiN coated tool. To this end, a new cooling system was designed with an air-oil method for reducing tool temperature, which is based on the principle of air vortex flow. That is, the outlet temperature of the air becomes aver 20 .deg. C lower than atmosphere temperature by entering pressurized air of 5kgf/c $m^{2}$ into the inlet. This cooled air ejected to the top of the cutting tool lowered tool temperature, which reduced the wear of a TiN coated tool by the 30% of CBN tool life with respect to the same cutting length.h.