• Journal of Engineering Education Research
• /
• v.19 no.3
• /
• pp.13-22
• /
• 2016

The purpose of this study is to analyze middle and high school technology teachers' recognition and educational need about engineering education. For this, we surveyed secondary school technology teachers. The result of this study is as follow. First, most technology teachers perceive that engineering contents are lack in technology education, therefore they recognize the needs of reinforcement of engineering contents. Second, most technology teachers perceive that present technology subject does not give positive affect to students for their own career selection on engineering field. Furthermore, they perceive that if it contained the contents of engineering in technology education, students would experience creative design and problem solving process. Third, most technology teachers perceive that they are able to teach engineering in technology education and they need the change of national curriculum and the development of engineering program contents. Fourth, they perceive that the 7~9 grade is the best grade to start to study engineering in elementary and secondary school. Fifth, they perceive that 'design', 'problem solving' and 'creative thinking' are the priority of educational needs of teaching ability and knowledge about engineering. Sixth, they perceive that the aerospace engineering, the electrical engineering, the electronic engineering, the mechanical engineering, the computer engineering and the environmental engineering are the priority of educational needs of teaching knowledge about engineering fields.

• Elastomers and Composites
• /
• v.52 no.1
• /
• pp.22-26
• /
• 2017

The thermal conductivity and the adhesive properties were measured, after synthesis of thermal conductive composite which was obtained as a result of mixing alumina or graphite with acrylic adhesive synthesized by UV polymerization. The adhesive properties of the composite were evaluated measuring the peel strength at 180 degrees, the retention, and the initial tack;the thermal conductivity was estimated using laser flash analysis. As the filler contents increased, a decrease in peel strength and initial tack and an increase in retention and thermal conductivity were observed. When compared to alumina, the adhesion of graphite showed a dramatic decrease, whereas the thermal conductivity was further enhanced. It was found out that the small size of graphite increased the mechanical interlocking between the polymer and the filler, and it was easier for graphite to come into contact with other graphite in the matrix.

• Ingenium
• /
• v.4 no.3
• /
• pp.74-87
• /
• 1997

• Journal of Engineering Education Research
• /
• v.16 no.5
• /
• pp.9-17
• /
• 2013

The purpose of this study is to analyze elementary and secondary school teachers' recognition about engineering education in elementary and secondary school. For this, we surveyed elementary and secondary school teachers. The result of this study is as follow. First, most teachers perceived that engineering positively affect national competitiveness and development. They also found that engineering education helps student to select natural science and engineering field career. Moreover, they perceived that engineering contents are not applied in elementary and secondary schools curriculums, hence it does not stimulate interest in engineering. Therefore, they perceived that if engineering education contents are systematically applied in formal curriculum, it will have a positive effect on current engineering education. Second, most teachers perceived that roles of engineering education are to make students learn creative design and problem solving process and inform about the engineering field career. They perceived that the best grade to start engineering education is 4~6 grade in elementary school and the best way to apply engineering education is through distributing engineering education contents to related subjects. They also perceived that technology subject has the most relation to engineering education and science subjects; mathematics subject follow after.

• Nuclear Engineering and Technology
• /
• v.54 no.7
• /
• pp.2564-2571
• /
• 2022

SiPMs are generally coupled into whole columns in gamma energy spectrum measurement, but the relationship between the distribution of whole SiPM columns and the energy resolution of the measured energy spectra is rarely reported. In this work, ∅ 3 × 3 inch NaI scintillator is placed on an 8 × 8 SiPM array, and the energy resolution of the ¹³⁷Cs peak at 662 keV corresponding to the γ-ray is selected as a reference. Each SiPM is switched to explore the influence of the number of SiPM arrays, distribution position, and reflective layer on the energy resolution of SiPMs. Results show that without coupling, the energy resolution is greatly improved when the number of SiPMs ranges from 4 to 32. However, after 32 slices (the area covered by SiPMs relative to the scintillator reaches 25.9%), the improvement in energy resolution and total pulse count is not obvious. In addition, the position of SiPMs relative to the scintillator does not exert much impact on the energy resolution. Results also indicate that by adding a reflective film (ESR), the energy resolution of the tested group increases by 10.38% on average. This work can provide a reference for the design and application of miniaturized SiPM gamma spectrometers.

• Journal of Engineering Education Research
• /
• v.15 no.5
• /
• pp.25-30
• /
• 2012

"The engineering education program for environmental intention and value creation" has been executed from 2008 to 2010 in Suzuka National College of Technology, which program was promoted as "Good Practice for Education" by Ministry of Education, Culture, Sports, Science and Technology Japan. "Eco-car project" is one of these practical ecology/environment education programs. The project's members have been learning and researching the environmental managements by the process of design, manufacturing, and assembly of solar car, highly effective fuel consumption car (Eco-run car), electric vehicle and fuel-cell car. Also this project was supported by some professional experts of the local industries and community. The students learned the actual industrial technique, the engineering management and the structure of local industries by this project. In this paper, the environmental intention engineering design education with local industry collaboration is introduced.

• Journal of Engineering Education Research
• /
• v.15 no.1
• /
• pp.18-25
• /
• 2012

This paper examines the academic basis, current status, and future directions of liberal education for engineers as consilience education. After paying attention to the lists of liberal education for engineers including history of technology, technology and society, engineering ethics, economics of technology, management of technology, and technology policy, I found the academic basis of liberal education for engineers in science and technology studies or innovation studies. And then I monitored how liberal education for engineers is managed focusing on the case of Pusan National University and introduced new attempts on liberal education for engineers in other universities in Korea. Lastly, the future directions for the development of liberal education for engineers were suggested such as the strengthening of lecturers' expertise, the reconstruction of engineering education course, and the promotion of relevant academic associations' cooperation.

• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.8
• /
• pp.787-793
• /
• 2012

This paper introduces the autonomous vehicle Pharos, which participated in the 2010 Autonomous Vehicle Competition organized by Hyundai-Kia motors. PHAROS was developed for high-speed on/off-road unmanned driving avoiding diverse patterns of obstacles. For the high speed traveling up to 60 km/h, long range terrain perception, real-time path planning and high speed vehicle motion control algorithms are developed. This paper describes the major hardware and software components of our vehicle.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.313-314
• /
• 2008

Ad hoc network is a multi-hop wireless network formed with non-infrastructure. The fact that limited resource could support the network of robust, simple framework and energy conserving etc. In this paper, we propose a new ad hoc multicast routing protocol for based on the ontology scheme called inference network. Ontology knowledge-based is one of the structure of context-aware.

• Journal of Engineering Education Research
• /
• v.16 no.1
• /
• pp.45-53
• /
• 2013

The Korean Society for Engineering Education (KSEE) has been conducted scholarship meeting, workshop, and publicated academic journal, Engineering Education Research, since 1998. Kim Jin-soo analysed 'Engineering Education Research' on methods of research and contents. However, there are an in crease in quantity since then, it needed to analyse and arrange. This study analysed all 417 papers which were published from 1998 to 2012. The conclusion is as in the following. First, the number of collections published has been increasing up to 6 per year. 75.5% of the lead author's institution are universities, and Engineering Education Innovation Center researcher has been increasing steadily up to 8.9%. Research about Engineering Education Methods and Programs are being mostly studied. Apart from classified field in this, a study on the psychological characteristics of technology students are being steadily researched. In papers, the literature/development research method is used the most frequently (54.6%), the research study (39.9%) is the next and the experimental research method (5.5%) is followed by. Since 2006, study using the experimental research method is the growing lately. Second, characteristic of study between institution of lead author, a field of study, a number of study and methods of research by cross analyzing. The result is as in the following. In case of university and Engineering Education Innovation Center researcher studied much more about Engineering Education Methods and programs, research laboratory researcher tend to study about Engineering Educational Philosophy and Policy. Also, foreign researcher tend to introduce Engineering Education Example and Lecture. In case of university and foreign researcher used the literature/development research method frequently. Engineering Education Innovation Center and research laboratory and school researcher used the research study much more. There is no difference between a field of study and research methods. Finally, research strategies and new direction for improving the engineering education journal's papers at the section of discussion and suggestion were suggested.