• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1146-1149
• /
• 2006

In this study, nanocomposite layer composed of PMMA-co-MMA and $TiO_2$ was prepared by sol-gel process using TTIP as a precursor and was utilized as a gate insulator of OTFTs. The composite insulator provides the lower threshold voltage and the enhanced sub threshold slope of OTFTs mainly due to its higher dielectric constant than that of the bare PMMA-co-MMA. Consequently, it is demonstrated that the sol-gel process can open an interesting direction for the fabrication of high-performance OTFTs, and contribute for OTFTs to be feasible for real applications.

• Journal of Power Electronics
• /
• 제16권6호
• /
• pp.2327-2337
• /
• 2016

The mode-switching control of transient process is important to grid-connected 400 Hz solid-state power supply systems. Therefore, this paper analyzes the principle of on-grid and islanding operation of the system with or without local loads in the grid-connected process and provides a theoretical study of the effect of different switching sequences on the mode-switching transient process. The conclusion is that the mode switch (MS) must be turned on before the solid-state switch (STS) in the on-grid process and that STS must be turned off before the MS in the off-grid process. A strategy of mode-switching smooth control for transient process of the system is proposed, including its concrete steps. The strategy utilizes the average distribution of peak currents and the smooth adjustment of peak currents and phases to achieve a no-shock grid connection. The simulation and experimental results show that the theoretical analysis is correct and that the method is effective.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1998년도 제13차 학술회의논문집
• /
• pp.451-454
• /
• 1998

This paper proposes a new method of Model Predictive Control (MPC) of nonlinear process by us-ing the measured Volterra kernels as the nonlinear model. A nonlinear dynamical process is usually de-scribed as Volterra kernel representation, In the authors' method, a pseudo-random M-sequence is ar plied to the nonlinear process, and its output is measured. Taking the crosscorrelation between the input and output, we obtain the Volterra kernels up to 3rd order which represent the nonlinear characteristics of the process. By using the measured Volterra kernels, we can construct the nonlinear model for MPC. In applying Model Predictive Control to a nonlinear process, the most important thing is, in general, what kind of nonlinear model should be used. The authors used the measured Volterra kernels of up to 3rd order as the process model. The authors have carried out computer simulations and compared the simulation results for the linear model, the nonlinear model up to 2nd Volterra kernel, and the nonlinear model up to 3rd order Vol-terra kernel. The results of computer simulation show that the use of Valterra kernels of up to 3rd order is most effective for Model Predictive Control of nonlinear dynamical processes.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1994년도 Proceedings of the Korea Automatic Control Conference, 9th (KACC) ; Taejeon, Korea; 17-20 Oct. 1994
• /
• pp.140-145
• /
• 1994

In this paper, we consider a problem to estimate process parameters using input-output data collected from the process operating in closed-loop control system. When orders and delay-time of the process are known correctly, under some conditions of identifying experiments, it is reported that accurate identification results can be obtained by applying prediction error method. To get accurate estimates, it is necessary to know orders and delay-time of the process. It is difficult to determine them in closed-loop identification, because ill-condition for identification are easily caused by selection of unsuitable order or delay time. Furthermore, the procedures to select orders and delay-time in open-loop identification aren't always available in closed-loop identification. The purpose of this paper is to determine a delay-time under suitable assumption that order of the process are known as the first step.

• 산업경영시스템학회지
• /
• 제24권63호
• /
• pp.45-54
• /
• 2001

The process capability indices have been widely used in manufacturing industries to provide numerical measures of process potential and performance. This study is concerned with process controls and adjustments by incapability index $C_{pp}$ and its sub-indices. A monitoring for $\^{C}_{pp}$ would provide a convenient way to monitor changes on process capability after statistical control is established, since $C_{pp}$ simultaneously measures process variability and centering. Further, we can separate charting of process location and variability by sub-indices of $C_{pp}$, ($C_{ia}$, $C_{ip}$), without returning to $\={x}$-R chart, even though an out-of-control signals on $\^{C}_{pp}$ control chart is found.

• 산업경영시스템학회지
• /
• 제28권3호
• /
• pp.166-171
• /
• 2005

With development of the database, there are too many data on process variables and the manufacturing process for the traditional statistical process control methods to identify the process variables related with assignable causes. Data mining is useful in this situation and provides variety of approaches for improving the process. In this paper, we applied control charts to monitor the process and if assignable causes are detected, then we applied the SVM technique and the sequence pattern analysis to find out the process variables suspected. These techniques made possible to predict the behavior of process variables. We illustrated our proposed methods with real manufacturing process data.

• 품질경영학회지
• /
• 제39권2호
• /
• pp.234-243
• /
• 2011

Multivariate control charts are widely used to monitor the performance of a multivariate process over time to maintain control of the process. Although existing multivariate control charts provide control limits to monitor the process and detect any extraordinary events, it is a challenge to identify the causes of an out-of-control alarm when the number of process variables is large. Several fault identification methods have been developed to address this issue. However, these methods require a normality assumption of the process data. In the present study, we propose a bootstrapped-based $T^2$ decomposition technique that does not require any distributional assumption. A simulation study was conducted to examine the properties of the proposed fault identification method under various scenarios and compare it with the existing parametric $T^2$ decomposition method. The simulation results showed that the proposed method produced better results than the existing one, especially in nonnormal situations.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.1240-1243
• /
• 2004

For agile production methods, manufacturing system requires development of a motion controller which has flexibility of general-purpose motion controller and productivity of specialized-purpose one. In this study we developed the Flowchart Programming development environment for Motion language and Process Control. The controller designed on this environment can be used as a general purpose motion controller of a machining tool. Design of control programming based on a flowchart has the advantage of reducing the time consumed and intuitive interface for users. We create the solution with the Microsoft Visio for the flowchart-based platform and OPC for the process communication..

• 한국물환경학회지
• /
• 제25권5호
• /
• pp.704-712
• /
• 2009

Advanced Phase Isolation Ditch (APID) process was studied to develop economic retrofitting technology, for the plants where retrofitting of common activated sludge process is required. In this study, to evaluate and monitor the effluent water quality ($BOD_5$, SS, T-N, and T-P) and operating conditions (Influent, SVI, SRT, and HRT) as process capable and stable parameters for treating municipal wastewater, a demonstration plant was installed and operated in the existing sewage treatment plant of P city. During this study, the average effluent $BOD_5$, SS, T-N, and T-P concentrations were 7.7, 5.6, 10.8, and 1.6 mg/L. Trend analysis of influent $BOD_5$, SS, T-N, and T-P in APID process were illustrated that APID process need for more strong APID process management on the winter session, such as developing new intermediated aeration mode, operating methods, and managements strategy. At the application of control chart, the signal of uncommon effects at APID process was determined much higher existing control chart tntr conventional control chart in this study. These results indicate that conventional control chart has been collected and determined cleary signal at only stable situation. Therefore, newly developed APID process of dynamic control chart can be one of the useful tool for monitoring and management process.

• 산업경영시스템학회지
• /
• 제28권2호
• /
• pp.36-45
• /
• 2005

This paper aims to investigate and analyze the process solving problems with activities of Quality Control Circle, carried out on a small scale, among various activities of industrial fields. Then this paper intends to provide and integrated model through integrating each process into one. In addition, this paper also aims to enhance the efficiency of the suggested model by realizing the model through support system.