• 국제학술발표논문집
• /
• The 1th International Conference on Construction Engineering and Project Management
• /
• pp.956-961
• /
• 2005

Delay, cost overrun and inferior quality in public works are common in Nepal and Cambodia. Almost 90 percent of the civil construction engineers working in the industry were one-degree graduates without appropriate training. The civil engineering education had provided elemental engineering knowledge to the graduates however integrated engineering and management knowledge and skill are essential for efficient infrastructure development. ODA in developing countries had been concentrated in hard infrastructure development without improving the quality of higher education. Integrating ODA to engineering education system would help develop qualified technical manpower and appropriate technology domestically, and improve the efficiency in infrastructure development in developing countries.

• 전기학회논문지
• /
• 제67권8호
• /
• pp.1031-1039
• /
• 2018

If large-scale PV systems are continuously interconnected to distribution system, customer voltages could violate the allowable voltage limit($220{\pm}13V$) according to reverse power flow of PV system. In order to solve these problems, this paper proposes flexible adoption evaluation algorithm of PV system in distribution system which estimates proper introduction capacity and location of ESS(energy storage system) for keeping customer voltages within allowable voltage limit based on various operating scenarios related with connecting point and capacity of PV system. And also this paper proposes modeling of ESS, SVR(step voltage regulator) and PV system using PSCAD/EMTDC S/W and analyzes characteristics of customer voltages and the adoption ability of PV system in distribution system. From the simulation results, it is confirmed that proposed algorithm is useful for large-scale adoption of PV system in distribution system to maintain customer voltages within allowable voltage limit.

• 공학교육연구
• /
• 제16권3호
• /
• pp.51-60
• /
• 2013

The paper addresses an issue of industry-joint engineering education paradigm with the purpose of setting a new standard for engineering education by development and support of competitive curriculum for the interdisciplinary team-based product development, a specialized and innovative engineering education program. In the department of MSDE (Mechanical and System Design Engineering), students are educated via three major courses for targeting engineering design, Creative Engineering Design (freshman), Design Process (Senior), and Creative Product Development (Junior). All these courses are based on personal tool exercises for design software and hardware and team-project group activities of the students with other team members. This paper will briefly discuss the main focuses of these courses and case studies of the teaching results targeting the development of telecommunication device.

• 공학교육연구
• /
• 제15권4호
• /
• pp.35-40
• /
• 2012

This study presents an analysis of the current situation (management, approach, adjustment, transportation, and others) of teaching portfolio by examining the teaching portfolio managers (staffs, researchers, teaching assistants, etc.) of 6 universities in the southeast of Korea. The rationale for the study focus is that the existing teaching portfolio either suffers a problem in the transportation, approach, adjustment and/or management or is likely to raise a problem in the future. In order to solve this problem, this study builds a web-based e-teaching portfolio. According to the analysis results, the engineering education system was established in all 6 universities (Ed- note that '6 universities' has already been specified as the study sample). The teaching portfolio was partially digitalized in this system, despite some problems of converting analog data into digital data, which induced difficulties in constructing the overall e-teaching portfolio. Therefore, this study focused on constructing an e-teaching portfolio without developing any additional system by using the existing system positively, and also on determining the appropriate components among the existing teaching portfolio components. Accordingly, in order to convert the analog data into the digital data required for this study, we used a digital camera as the conversion device and converted the teaching portfolio components into those appropriate for the e-teaching portfolio. Finally, we constructed an existing system appropriate for the e-teaching portfolio by using these devices and components.

• 전기학회논문지
• /
• 제64권10호
• /
• pp.1411-1417
• /
• 2015

The installation of PV system to the power distribution system is being increased as one of solutions for environmental pollution and energy crisis. However, the efficiency of PV system is getting decreased because of the aging phenomenon and several operation obstacles. Therefore, The technology development of aging diagnosis of PV modules are required in order to improve operation performance of PV modules. This paper proposes evaluation algorithm for aging state in PV modules by using the electrical characteristics of PV modules and environmental factors. And also, this paper presents a operation evaluation system of PV modules based on the proposed aging diagnosis algorithm of PV modules. From the simulation results of proposed evaluation system, it is confirmed that the proposed algorithm is a useful tool for aging diagnosis of PV systems.

• 실천공학교육논문지
• /
• 제11권2호
• /
• pp.283-289
• /
• 2019

최근 스마트제조에 따른 제어시스템은 제품 이동성, 데이터 호환성, 통신 연계성 등이 매우 중요해지고 있다. 이에 임베디드 시스템은 가전제품, 통신, 국방 등 전 산업분야에서 필수적으로 적용되고 있다. 따라서 임베디드 시스템 개발인력 수요는 더욱 더 증가하는 추세이므로 프로그래밍 능력과 하드웨어를 포함하여 산업현장 실무능력을 겸비한 교육훈련 프로그램이 필요하다. 현재 임베디드 시스템 교육은 아두이노를 활용한 다양한 교육을 수행하고 있지만 이는 비전공자와 초심자 중심이며 임베디드 시스템 전공자 교육과정으로 미약한 실정이다. 또한 임베디드 시스템 기반의 시제품 연구는 활발하지만 산업현장에서 요구하는 실무인재 양성을 위한 교육훈련 프로그램은 매우 미비하다. 따라서 본 논문은 스마트제조 적용을 위한 임베디드 시스템 실무인재 양성을 위해 NCS 기반 전문가 10인의 심층 인터뷰와 설문 분석을 바탕으로 능력단위를 선정하고 교육훈련 프로그램과 컨텐츠를 개발하였다.

• 공학교육연구
• /
• 제3권2호
• /
• pp.31-37
• /
• 2000

본 논문에서는 인터넷을 이용하여 전기전자 기초실험을 웹상에서 수행할 수 있는 가상 실험실을 개발하였다. 전기전자분야의 기본적인 이론이나 법칙을 학습자가 웹상에 구현된 회로를 이용하여 간단한 마우스 조작을 통하여 가상적으로 실험함으로써 전기전자분야의 기본 이론이나 원리를 쉽게 습득하도록 하였다. 제안된 가상 실험실은 실제 실험과 거의 같은 상황을 묘사하도록 프로그램되어 학습자는 실제 실험과 거의 유사한 실험 결과를 얻을 수 있다. 또한 개발된 가상 실험실은 웹상에서 구현되었기 때문에 학습자가 인터넷을 통하여 언제 어디서나 접속할 수 있으며 실제 실험을 하거나 보조학습 매체로 사용함으로서 그 교육 효과가 클것으로 기대된다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 A
• /
• pp.27-29
• /
• 1997

There have been great advances in communication and networking in recent times. It is necessary to take advantage of this information infrastructure for the purpose of developing an engineering education system, but the networking system was expensive or hard to develop. The current international networking is converging to the use of the World Wide Web system. It has become a new standard for global network communication. But there are not a great number of applications which take full advantage of this environment. In this paper, an interactive education system for engineering education using the World Wide Web will be presented. This can be used as a supplementary kit for engineering education of DC machine design. The system is developed using JAVA and can be accessed using Web browsers.

• 공학교육연구
• /
• 제19권4호
• /
• pp.60-71
• /
• 2016

Due to the development of science and technology, diversity of fusion technologies has become a major concern. Especially the application of the convergence education became necessary in the curriculum of engineering department. The purpose of this paper is to extract characteristics of convergence education among engineering majors and to present a model of applicable convergence education. The researchers collected studies of past 15 years in domestic and international journals in related themes. Academic research information systems, DBpia, e-article, Academic Search Complete were used for keyword searches. 43 Korean papers and 25 international papers were analyzed for the study. The results showed that the convergence education models for college of engineering can be classified into the three types: the cooperative convergence, multidisciplinary convergence, and transdisciplinary convergence. Based on the results, a convergence education model is suggested for the schools of engineering in Korea.

• 공학교육연구
• /
• 제8권4호
• /
• pp.31-39
• /
• 2005

사회는 매우 빨리 변화하고 있으나 변화의 핵심 인력과 기술을 제공해야하는 이공계대학의 교육과정은 이러한 변화의 속도를 따라가지 못하고 있다. 사회에서는 한 명이 수만 명을 먹여 살릴 수 있는 소위 gold color engineer 를 요구하고 있으나 대학의 반응은 아직까지 미진하다. 따라서 이런 사회의 빠른 변화에 대응하여 이공계교육이 적절히 변화할 수 있는 교육시스템의 구축이 매우 필요하다. 본 논문에서는 이를 위하여 이공계 대학교육과정의 문제점을 분석하고 그 개선방안을 논하고자 한다. 이공계 교육 내용에 대한 공급자와 수요자의 차이를 분석하고 이를 제고하기 위하여 새로운 교육체계를 제시하였다. 직업기초능력에 대한 설문을 실시하였고 국내외 이공계 교육 현황과 최근 국내 이공계 신입생의 과목이수 내용 등을 조사하였다. 또한 교육과정 개선을 위한 국가의 지원 방안을 제시하였다.