• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.1
• /
• pp.107-116
• /
• 2009

Quantum-dot Cellular Automata (QCA) is one of the most promising next generation nanoelectronic devices which will inherit the throne of CMOS which is the domineering implementation technology for large scale low power digital systems. In late 1990s, the basic operations of the QCA cell were already demonstrated on a hardware implementation. Also, design tools and simulators were developed. Nevertheless, its design technology is not quite ready for ultra large scale designs. This paper proposes a new approach which enables the QCA designs to inherit the verification methodologies and tools of CMOS designs, as well. First, a set of disciplinary rules strictly restrict the cell arrangement not to deviate from the predefined structures but to guarantee the deterministic digital behaviors is proposed. After the gate and interconnect structures of. the QCA design are identified, the signal integrity requirements including the input path balancing of majority gates, and the prevention of the noise amplification are checked. And then the digital logic is extracted and stored in the OpenAccess common engineering database which provides a connection to a large pool of CMOS design verification tools. Towards validating the proposed approach, we designed a 2-bit adder, a bit-serial adder, and an ALU bit-slice. For each design, the digital logic is extracted, translated into the Verilog net list, and then simulated using a commercial software.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.8 no.2
• /
• pp.157-165
• /
• 2005

The purpose of this study is to examine the relationship between land use patterns of riparian zones and water quality in the Geumho River watershed. A GIS database included digital land use maps (1:25,000), stream network extracted from digital topographic maps (1:5,000) and riparian zones maps by multi-buffering method. Pearson's correlation analysis was used to explain the relationship between the environmental conditions of a 30 meter buffer strip on each side and water quality. According to the result of investigation of riparian-level land use patterns, sub-watersheds on the lower Geumho River including Daegu metropolitan city were mainly developed as urban area such as residential, commercial and industrial ones, while sub-watersheds on the middle Geumho River and the main course of Nakdong River, agricultural ones such as a paddy, a dry field and an orchard. Meanwhile, the area-rate of riparian forests which play an important role in filtering nitrogen, phosphorus and sediment was estimated below the average 16%. The proportion of urban area in a 30 meter riparian bufferstrip had a negative correlation with water quality in each sub-watershed. But the proportion of forest area had a positive correlation with water quality. Henceforth, it is necessary to establish landscape planning for preparing and restoring the riparian buffer zones, concerning land form, soil type, the present land use pattern and economic aspects.

• Journal of Korean Society of Transportation
• /
• v.32 no.1
• /
• pp.1-12
• /
• 2014

The tier 3 methodology used in estimation of greenhouse gas emissions from road sectors is based on mileage data. However, such data can neither accurately represent the mileage of regional unit nor have sufficient integrated data reflecting the characteristics by region, vehicle type, fuel type and road type. Such estimation of greenhouse gas emissions is not reliable. Accordingly, the purpose of this study is, firstly to accumulate activity data based on distance traveled which enables us to accurately estimate the amount of green gas emitted by regional unit(emission point), and secondly, to develop a methodology for estimation of greenhouse gas emissions using these data. To do this, the study utilizes the mileage data of Korea Transportation Safety Authority(TS), statistics of registered motor vehicles, statistical yearbook of traffic volume from the Ministry of Land, Infrastructure and Transport(MLIT), the Korea Transport Database of the Korea Transport Institute(KOTI), and average road speed by local government. Methodology for estimation by local government level(emission point) is meaningful, because it reflects traffic pattern data including flow in and out and internal traffics. Finally, to verify the methodology presented in this study, it is applied to Seoul. Both greenhouse gas estimates, one by multiplying the average mileage and the number of registered vehicles and the other by multiplying traffic volume and road extension, are less than the amount estimated by the methodology presented in this study.

• Journal of Digital Convergence
• /
• v.15 no.11
• /
• pp.261-269
• /
• 2017

The purpose of this paper is to provide a search system using a method of accessing the web in real time without using a database server in order to guarantee the up-to-date information in a single network, rather than using a plurality of bots connected by a wide area network Design. The method of the research is to design and analyze the system which can search the person and keyword quickly and accurately in crepe system. In the crepe server, when the user registers information, the body tag matching conversion process stores all the information as it is, since various styles are applied to each user, such as a font, a font size, and a color. The crepe server does not cause a problem of body tag matching. However, when executing the crepe retrieval system, the style and characteristics of users can not be formalized. This problem can be solved by using the html_img_parser function and the Go language html parser package. By applying queues and multiple threads to a general-purpose web crawler, rather than a web crawler design that targets a specific site, it is possible to utilize a multiplier that quickly and efficiently searches and collects various web sites in various applications.

• Journal of Korean Society for Geospatial Information Science
• /
• v.24 no.4
• /
• pp.21-28
• /
• 2016

Numeric weather prediction is important to prevent meteorological disasters such as heavy rain, heat wave, and cold wave. The Korea meteorological administration provides a realtime special weather report and the rural development administration demonstrates information about 2-day warning of agricultural disasters for farms in a few regions. To improve the early warning systems for meteorological hazards, a nation-wide high-resolution dataset for weather prediction should be combined with web-based GIS. This study aims to develop a web service prototype for early warning of meteorological hazards, which integrates web GIS technologies with a weather prediction database in a temporal resolution of 1 hour and a spatial resolution of 1 km. The spatially and temporally high-resolution dataset for meteorological hazards produced by downscaling of GME was serviced via a web GIS. In addition to the information about current status of meteorological hazards, the proposed system provides the hourly dong-level forecasting of meteorologic hazards for upcoming seven days, such as heavy rain, heat wave, and cold wave. This system can be utilized as an operational information service for municipal governments in Korea by achieving the future work to improve the accuracy of numeric weather predictions and the preprocessing time for raster and vector dataset.

• International Journal of Highway Engineering
• /
• v.17 no.4
• /
• pp.11-18
• /
• 2015

PURPOSES: This study aims to evaluate the runoff reduction with permeable pavements using the SWMM analysis. METHODS: In this study, simulations were carried out using two different models, simple and complex, to evaluate the runoff reduction when an impermeable pavement is replaced with a permeable pavement. In the simple model, the target area for the analysis was grouped into four areas by the land use characteristics, using the statistical database. In the complex model, simulation was performed based on the data on the sewer and road network configuration of Yongsan-Gu Bogwang-Dong in Seoul, using the ArcGIS software. A scenario was created to investigate the hydro-performance of the permeable pavement based on the return period, runoff coefficient, and the area of permeable pavement that could be laid within one hour after rainfall. RESULTS : The simple modeling analysis results showed that, when an impervious pavement is replaced with a permeable pavement, the peak discharge reduced from $16.7m^3/s$ to $10.4m^3/s$. This represents a reduction of approximately 37.6%. The peak discharge from the whole basin showed a reduction of approximately 11.0%, and the quantity decreased from $52.9m^3/s$ to $47.2m^3/s$. The total flowoff reduced from $43,261m^3$ to $38,551m^3$, i.e., by approximately 10.9%. In the complex model, performed using the ArcGIS interpretation with fewer permeable pavements applicable, the return period and the runoff coefficient increased, and the total flowoff and peak discharge also increased. When the return period was set to 20 years, and a runoff coefficient of 0.05 was applied to all the roads, the total outflow reduced by $5195.7m^3$, and the ratio reduced to 11.7%. When the return period was increased from 20 years to 30 and 100 years, the total outflow reduction decreased from 11.7% to 8.0% and 5.1%, respectively. When a runoff coefficient of 0.5 was applied to all the roads under the return period of 20 years, the total outflow reduction was 10.8%; when the return period was increased to 30 and 100 years, the total outflow reduction decreased to 6.5% and 2.9%, respectively. However, unlike in the simple model, for all the cases in the complex model, the peak discharge reductions were less than 1%. CONCLUSIONS : Being one of the techniques for water circulation and runoff reduction, a high reduction for the small return period rainfall event of penetration was obtained by applying permeable pavements instead of impermeable pavement. With the SWMM analysis results, it was proved that changing to permeable pavement is one of the ways to effectively provide water circulation to various green infrastructure projects, and for stormwater management in urban watersheds.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.6
• /
• pp.656-662
• /
• 2016

We have provided a variety of domestic construction technology related full-text services through the Construction Technology Digital Library system since 2001. CODIL is a system that services the database related to construction technology data. On the other hand, there is growing demand for DB every year, but the required budget is shrinking. Therefore, this study investigated the satisfaction to effectively service the construction technique-related full-text with a limited budget. The monetary value of full-text to express satisfaction with the quantified value was estimated using the Tobit model. The Tobit model is used as a contingent valuation method to estimate the value of non-market goods. This model is the limited dependent variable regression model to observations by censoring the limit of the left side or right side so that a biased outlier is not reflected in the willingness to pay. A survey was conducted by sampling 312 respondents. The mean, median, truncating the willingness of payment were calculated for the six types of the full-text services using the Tobit model. The statistically significant variables affecting the willingness to pay for the full-text services were identified. The mean value of per the full-text service was estimated to be 46,530 won. The significance of this study was to use the Tobit model to estimate the value of the construction technology-related full-text services for the first time in Korea.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.6
• /
• pp.1321-1328
• /
• 2015

The automobiles in Korea have approximately 60 years of history and this is relatively short compared to advanced countries. However, considering the traffic accident rate or severity related to automobiles, various efforts are required to reduce traffic accidents. Various problems caused by traffic accidents are not only related to individual damages but also have become social problems. In order to resolve this, it is important to analyze the cause of traffic accidents. This study aims to suggest methods to reduce traffic accidents by analyzing driving behavior, which is one of the reasons for a number of traffic accidents that were collected through traffic accident videos reported using DVRs (Driving Video Recorder) and were aired to the public via a SBS TV program for the past two years and four months. In particular, unlike other existing studies that aim at analyzing the causes of traffic accidents simply using data, this study constructed a database by analyzing every single DVR that stores the situation before and after the accident using relatively high-resolution video information to provide practical plans to reduce traffic accidents through statistical analysis.

• International Journal of Highway Engineering
• /
• v.10 no.2
• /
• pp.1-13
• /
• 2008

This study presents a case study of condition evaluation of various asphalt pavement sections to estimate performance lives. The pavement surface conditions including cracking and rutting are first evaluated using a automatic pavement analyzer, ARAN. HPCI(Highway Pavement Condition Index) values are estimated using the pavement surface distress data. It is observed from the pavement distress survey that the major distress type of the sections is top-down cracking. The modulus value of each pavement layer is back-calculated from the defection data obtained from a FWD(Falling Weight Deflectometer) and compared with the laboratory measured dynamic modulus values. Remaining lives of the various pavement sections are estimated based on a mechanistic-empirical approach and AAHTO 1993 design guide. The structural capacities of the all pavement sections based on the two approaches are strong enough to maintain the pavement sections for the rest of design life. Since the major distress type is top-down cracking, the remaining lives of the pavement sections are estimated based on HPCI and existing performance database of highway pavements. To evaluate the causes of premature pavement distress, various material properties, such as air void, asphalt binder content, aggregate gradation, dynamic modulus and fatigue resistance, are measured from the field cores. It is impossible to accurately estimate the binder contents of field samples using the ignition method. It is concluded from the laboratory tests that the premature top down cracking is mainly due to insufficient compaction and inadequate aggregate gradation.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.19 no.3
• /
• pp.89-101
• /
• 2016

This study examined spatial disposition of wildlife highway mortality using road-kill GIS database and Naver panoramic 360 degree views to find out which habitat and road variables most influenced road-kill numbers for each mammal species and how the landscape and road elements are connected on highway. Road-kills on Yeongdong(YD) and Jungbu highway(JB) generally tended to be higher in natural barren, grassland and cropland due to its value of preferred habitats of nocturnal and multihabitat species like water deer(Hydropotes inermis argyropus), raccoon(Nyctereutes procyonoides) and hare(Lepus coreanus). Land cover in YD showed no difference between species (p=0.165) while JB did by species (p=0.001). This may be explained by disparate landscape between mountain and urban or the fact that YD in long term operation might have enabled consistent crossing pattern compared to JB experiencing continuous extension works which may in turn have deviated the road crossing. Although road-kill prevention effect of local topography alone was appreciable, compared to less significant or ineffective fence and guardrail, gentle slope declining in a direction to the road turned out to offset the preventive effect of juxtaposed fence. Furthermore, green patches on road near intersection were deemed a visual stepping stone facilitating wildlife attempted crossing and local roads juxtaposed with a highway were especially left defenceless to road-kill without road barriers.