• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2010.05a
• /
• pp.14-14
• /
• 2010

Plastid proteomics are essential organelles present in virtually all cells in plants and green algae. Plastids are responsible for the synthesis and storage of key molecules required for the basic architecture and functions of plant cells. The proteome of plastid, and in particular of chloroplast, have received significant amounts of attention in recent years. Various fractionation and mass spectrometry (MS) techniques have been applied to catalogue the chloroplast proteome and its sub-organelles compartments. To better understanding the function of the lumenal sub-organelles within the thylakoid network, we have carried out a systematical analysis and identification of the lumenal proteins in the thylakoid of wheat by using Tricine-SDS-PAGE, and LTQ-ESI-FTICR mass spectrometry followed by SWISS-PROT database searching. We isolation and fractionation these membrane from fully developed wheat leaves using a combination of differential and gradient centrifugation couple to high speed ultra-centrifuge. After collecting all proteins to eliminate possible same proteins, we estimated that there are 407 different proteins including chloroplast, chloroplast stroma, lumenal, and thylakoid membrane proteins excluding 20 proteins, which were identified in nucleus, cytoplasm and mitochondria. A combination of these three programs (PSORT, TargetP, TMHMM, and TOPPRED) was found to provide a useful tool for evaluating chloroplast localization, transit peptide, transmembranes, and also could reveal possible alternative processing sites and dual targeting. Finally, we report also sub-cellular location specific protein interaction network using Cytoscape software, which provides further insight into the biochemical pathways of photosynthesis. The present work helps understanding photosynthesis process in wheat at the molecular level and provides a new overview of the biochemical machinery of the thylakoid in wheat.

• Journal of the Korean Geophysical Society
• /
• v.9 no.1
• /
• pp.47-62
• /
• 2006

More than 70% of Korean Peninsula is consisted of mountains, so that lots of roads, rail-roads and tunnel,which play a pivotal role in the industry activity, are existed along the rock-slope and in the rock-mass. Thus,it is urgent that tegration of management system through the optimum survey and design of rock-slope excavation, proper stabilization method and database of rock-slope. However, conventional methods have shortcoming with the economy of survey time and human resources, and the overcome of difficulties of approach to the in-situ rock-slope. To overcome the limitation of conventional method, this paper proposed the development of remote measurement system using Terrestrial Laser Scanning System. The method using Terrestrial 3D Laser Scanning System, which can get 3D spatial information on the rock-slope and2)Dept. Geosystem Engineering, Kangwon National University, Korea tunnel, has an advantage of reduction of measurement time and the overcome of difficulties of approach to the in-situ rock-slope/dam/tunnel. In the case of rock-slope, through the analysis of 3D modeling of point-cloud by Terrestrial Laser Scanning System, orientation of discontinuity, roughness of joint surface, failure shape and volume were successively achieved. in the case of tunnel face, through reverse-engineering, monitoring of displacement was possible.

• Economic and Environmental Geology
• /
• v.39 no.4 s.179
• /
• pp.403-416
• /
• 2006

Magnetic method is rapid, cheap and simple geophysical exploration technique, and has wide range of applications such as resources prospecting, geological structure investigation and even geotechnical and environmental problems. Especially, aeromagnetics gives fundamental and useful geoscientific data fnr not only assessment of potential resources, but also national land planning. Magnetic method, perhaps the oldest geophysical technique, was relatively early introduced into Korea. Documents during Japanese occupation says that magnetic method was used for exploring metallic ore deposits and hot spring, and that a geomagnetic observatory was operated. From mid 1950's, after Korean War, magnetic explorations for natural resources such as metallic ore, uranium, coal, and groundwater were intensively executed for industrialization. Apache aeromagnetic survey project during $1958{\sim}1959$ and its ground follow-up surveys are typical and important cases in those days. Magnetic survey techniques were rapidly advanced during 1970's and 1980's with improvements of instruments, growth of geophysical manpower, and availability of computers. The national aeromagnetic mapping project by KIGAM in 1981 showed the improved technical capability of those days. Decline of mining industry since mid 1980's moved the exploration objects from traditional resources to new ones such as groundwater and geothermal resources, and applications to investigation of geological structure were revived. Recently appeared applications such as natural hazard assessment, and engineering and environmental studies increased the magnetic method's utility in the realm of exploration.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.5 no.4
• /
• pp.93-105
• /
• 2002

In this paper forest fire status information management system was developed under web environment using web GIS(geographic information system) technology. Though this system, general users can easily retrieval domestic forest fire status information and obtain that in visual way such as maps, graphs, and texts if they have only certain web browsers. Moreover, officials, who have system access authority, can easily control and manage all domestic forest fire status information through input interface, retrieval interface, and out interface of the system. This system can be considered as the first domestic system to manage forest fire status data and service them in visual through user friendly interfaces on web. In order to implement this system, IIS 5.0 of Microsoft is used as web server and Oracle 8i and ASP(active server page) are used for database construction and dynamic web page operation, respectively. Also, ArcGIS IMS(internet map server) of ESRI is used to serve maps by using Java and HTML as system development languages. Not only the domestic tendency of forest fire but also the forest fire status information of certain area and time such as the frequency and the loss can be presented through distribution maps, graphs and tables. Therefore, this system is supposed to play as a important role when the policy relate to domestic forest fire is established. In addition, the self consciousness of people against forest fire can be inspired and the foundation of scientific and systemic forest fire services can be obtained through this system in the future.

• Journal of the Korea Concrete Institute
• /
• v.27 no.6
• /
• pp.687-693
• /
• 2015

The present study proposed a k-value to determine the water-to-binder ratio of concrete using fly ash (FA) or ground granulated blast-furnace slag (GGBS) as a partial replacement of ordinary portland cement (OPC) with regard to an equivalent strength of OPC concrete. From the regression analysis using an extensive database including 7076 concrete mixes, k-values were determined for various water-to-binder ratios when the replacement ratio of OPC by the addition of FA or GGBS were below 50%. For deriving an equation to identify k-value, the relationship of concrete compressive strength and water-to-binder ratio was generalized by an exponential function. In general, k-values decreased with the increases in the addition of FA or GGBS for replacement of OPC and water-to-binder ratio. The rate in decreasing k-value against water-to-binder ratio was marginally affected by the addition of FA or GGBS, although a higher k-value was commonly obtained for GGBS concrete than for FA concrete at the same water-to-binder ratio. Consequently, the determined k-values were simplified as a function of water-to-binder ratio and the addition ratio of FA or GGBS as replacement of OPC.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.43 no.6 s.312
• /
• pp.61-67
• /
• 2006

In this paper it was introduced that embedded RFID Reader /Writer system including PXA255 ARM chip which enables the Tag signal to be used by data and video processing via IEEE 802.11 communication protocol. Embedded RFID R/W middle ware was developed which transmit the searched result in the data base using the received Tag signal via IEEE 802.11 communication protocol. Developed embedded RFID R/W system was composed of three parts - PXA255 ARM chid (Core Part) 13.56 MHz RFID Reader /Writer, wireless LAN for data communication with server and TFT-LCD terminal. Once this system receives the Tag signal through the serial port, it transmits the data through the wireless LAN to the server and it displays the received image data which was processed by the server onto the TFT-LCD screen. Embedded RFID R/W Middle ware transmits the received Tag signal from RFID R/W to the embedded system, which activates the socket program to connect to the window server via IEEE 802.11 communication protocol and transmits the Tag signal. Window server program searches the Database using this Tag information and displays the result on to the TFT-LCD window in the embedded system via IEEE 802.11 protocol.

• Journal of IKEEE
• /
• v.18 no.4
• /
• pp.471-477
• /
• 2014

In this paper, we propose a low-cost license plate recognition system based on smart cam system using Android. The proposed system consists of a portable device and server. Potable device Hardware consists of ARM Cortex-A9 (S5PV210) processor control unit, a power supply device, wired and wireless communication, input/output unit. We develope Linux kernel and dedicated device driver for WiFi module and camera. The license plate recognition algorithm is consisted of setting candidate plates areas with canny edge detector, extracting license plate number with Labeling, recognizing with template matching, etc. The number that is recognized by the device is transmitted to the remote server via the user mobile phone, and the server re-transfer the vehicle information in the database to the portable device. To verify the utility of the proposed system, user photographs the license plate of any vehicle in the natural environment. Confirming the recognition result, the recognition rate was 95%. The proposed system was suitable for low cost portable license plate recognition device, it enabled the stability of the system when used long time by using the Android operating system.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.13
• /
• pp.5297-5304
• /
• 2015

Background: The Pakistan Atomic Energy Commission Cancer Registry (PAECCR) program has made availability of a common cancer incidence database possible in Pakistan. The cancer incidence data from nuclear medicine and oncology institutes were gathered and presented. Materials and Methods: The cancer incidence data for the last 30 years (1984-2014) are included to describe a data set of male and female patients. The data analysis concerning occurrence, trends of common cancers in male and female patients, stage-wise distribution, and mortality/follow-up cases is also incorporated for the last 10 years (2004-2014). Results: The total population of provincial capital Lahore is 9,800,000. The total number of cancer cases was 80,390 (males 32,156, females 48,134). The crude incidence rates in PAECCR areas were 580.8/$10^5$ during 2010 to 885.4/$10^5$ in 2014 (males 354.1/$10^5$, females 530.1/$10^5$). The cancer incidence rates for head and neck (15.70%), brain tumors (10.5%), and non-Hodgkin lymphoma (NHL, 9.53%) were found to be the highest in male patients, whereas breast cancer (46.7%), ovary tumors (6.80%), and cervix (6.31%) cancer incidence rates were observed to be the most common in female patients. The age range distribution of diagnosed and treated patients in conjunction with the percentage contribution of cancer patients from 15 different cities of Punjab province treated at the Institute of Nuclear Medicine and Oncology, Lahore are also included. Leukemia was found to be the most common cancer for the age group of 1-12 years. It has been identified that the maximum number of diagnosed cases were found in the age range of 51-60 years for males and 41-50 years for female cancer patients. Conclusions: Overall cancer incidence of the thirty years demonstrated that head and neck and breast cancers in males and in females respectively are the most common cancers in Punjab province in Pakistan, at rates almost the highest in Asia, requiring especial attention. The incidence of brain, NHL, and prostate cancers among males and ovarian and cervix cancers among females have increased rapidly. These data from a major population of Punjab province should be helpful for implementation of appropriate planning, prevention and cancer control measures and for determination of risk factors within the country.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.23 no.5
• /
• pp.385-391
• /
• 2013

Big Data is data of big size which is not processed, collected, stored, searched, analyzed by the existing database management system. The parallel genetic algorithm using the Hadoop for BigData technology is easily realized by implementing GA(Genetic Algorithm) using MapReduce in the Hadoop Distribution System. The previous study that the genetic algorithm using MapReduce is proposed suitable transforming for the GA by MapReduce. However, they did not show good performance because of frequently occurring data input and output. In this paper, we proposed the MRPGA(MapReduce Parallel Genetic Algorithm) using improvement Map and Reduce process and the parallel processing characteristic of MapReduce. The optimal solution can be found by using the topology, migration of parallel genetic algorithm and local search algorithm. The convergence speed of the proposal method is 1.5 times faster than that of the existing MapReduce SGA, and is the optimal solution can be found quickly by the number of sub-generation iteration. In addition, the MRPGA is able to improve the processing and analysis performance of Big Data technology.

• Journal of Navigation and Port Research
• /
• v.33 no.10
• /
• pp.671-678
• /
• 2009

Recently, there have been some researches in the equipment fault detection based on shock and vibration information. Most research of them is based on shock and vibration monitoring to determine the equipment fault or not. Different with engine fault detection based on shock and vibration information we focus on detection of engine for boat and system control. First, it use the duplicated-checking method for shock and vibration information to determine the engine fault or not. If there is a fault happened, we use the integral to determine the error engine shock wave width and detect the fault area. On the other hand, we use the engine trend analysis and standard of safety engine to implement the shock and vibration information database. Our simulation results show that the probability of engine fault determination is 98% and the probability of engine fault detection is 72%