• Structural Engineering and Mechanics
• /
• v.32 no.1
• /
• pp.37-53
• /
• 2009

In this paper the problem of calculating the probability that the responses of a wind-excited structure exceed specified thresholds within a given time interval is considered. The failure domain of the problem can be expressed as a union of elementary failure domains whose boundaries are of quadratic form. The Domain Decomposition Method (DDM) is employed, after being appropriately extended, to solve this problem. The probability estimate of the overall failure domain is given by the sum of the probabilities of the elementary failure domains multiplied by a reduction factor accounting for the overlapping degree of the different elementary failure domains. The DDM is extended with the help of Line Sampling (LS), from its original presentation where the boundary of the elementary failure domains are of linear form, to the current case involving quadratic elementary failure domains. An example involving an along-wind excited steel building shows the accuracy and efficiency of the proposed methodology as compared with that obtained using standard Monte Carlo simulations (MCS).

• Journal of Microbiology and Biotechnology
• /
• v.23 no.10
• /
• pp.1428-1433
• /
• 2013

Jeotgal fermentation is dependent upon a diverse microbial community, although a detailed understanding of its microbial composition is limited to a relatively small number of jeotgal. Pyrosequencing-based bacterial community analysis was performed in fermented squid, ojingeo jeotgal. Leuconostoc was identified as the predominant bacterial genus, with Bacillus and Staphylococcus also accounting for a large proportion of the bacterial community. Phylogenetic analysis with 16S rRNA genes of Leuconostoc type species indicated that L. citreum- and L. holzapfelii-like strains could be the major Leuconostoc strains in jeotgal. High concentrations of NaCl were thought to be an important factor determining the makeup of the bacterial community in the fermented squid; however, a genomic survey with osmotic stress-related genes suggests the existence of more complex factors selecting the dominant bacterial species in fermented squid.

• Journal of Environmental Science International
• /
• v.24 no.11
• /
• pp.1473-1483
• /
• 2015

In this study, a digital terrain analysis had been performed for a mountainous watershed having wetlands. In order to consider the impact for wetland in the flow determination algorithm, the Laplace equation is implemented into the upslope accounting algorithm of wetness computation scheme. The computational algorithm of wetland to spatial contribution of downslope area and wetness was also developed to evaluate spatially distributed runoff due to the presence of wetland. Developed schemes were applied to Wangpichun watershed located Chuncuk mountain at Ulzingun, South Korea. Both spatial distribution of wetness and its histogram indicate that the developed scheme provides feasible consideration of wetland impact in spatial hydrologic analysis. The impact of wetland to downslope propagation pattern is also useful to evaluate spatially distributed runoff distribution.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.1
• /
• pp.130-137
• /
• 2009

This paper deals with the comparisons of methodologies to express finite rotations accounting for analysis of the rotor system. Researches have been made to predict a behavior of its rotational motion by introducing Euler angles which turned out to be lack in consistency and exactness of the analysis. To overcome this deficiency a new methodology is applied by using both spherical coordinate and quaternion in the rotor rotation and shows its superiority over choices of the Euler angle in terms of kinetic energy and rotation velocity. It is found through numerical examples that quaternion is a more useful and valid tool to derive the ideal numerical model of the rotor system.

• Steel and Composite Structures
• /
• v.29 no.2
• /
• pp.161-173
• /
• 2018

Point bending is often used for cambering and curving structural steel girders. An analytical solution, applicable in the elasto-plastic range only, that relates applied loads to the desired curve was recently developed for inducing horizontal curves using four-point bending. This solution does not account for initial residual stresses and geometric imperfections built-in hot-rolled sections. This paper presents results from a full-scale test on a hot-rolled steel section curved using four-point bending. In parallel, a numerical analysis, accounting for both initial geometric imperfections and initial residual stresses, was carried out. The models were validated against the experimental results and a good agreement for lateral offset and for strain in the elasto-plastic and post-plastic ranges was achieved. The results show that the effect of initial residual stresses on deformation and strain is minimal. Finally, residual stresses due to cold bending calculated from the numerical analysis were assessed and a revised stress value for the service load design of the curved girder is proposed.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.13 no.22
• /
• pp.7-16
• /
• 1990

Because economic depreciation includes some disciplines like economics, accounting and industrial engineering, the terminologies concerned are selected and arranged. The economic depreciation is defined with which the cases that occur when economic depreciation is measured are considered. Two major methods of the measurement of economic depreciation are reviewed these are Hulten-Wykoff's approach and Bureau of Economic Analysis of U.S.A. methodology. In its application in Korea the expected problems are presented. This paper also shows that it is rarely possible. Therefore Under the restricted condition a method to measure the economic deprection is suggested in Korea manufacturing sector.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2003.11b
• /
• pp.1249-1252
• /
• 2003

최근 분산되어있는 이 기종의 컴퓨팅 자원들을 통합하는 그리드에 관한 연구가 활발히 진행되고 있다. 그리드는 여러 사이트에 있는 자원들을 공유하고 검색하고 통합하며 각각의 그리드 사용자의 정보를 쉽고 빠르게 검색할 수 있는 환경이 필수적이다. 이러한 환경을 구축하기 위해서 본 논문에서는 웹 기반 인터페이스를 통하여 그리드 사용자 계정을 통합하고 그리드 사용자의 어카운팅 정보를 취합하는 그리드 어카운팅 서비스를 위한 웹 포탈을 설계하였다.

• Proceedings of the KIEE Conference
• /
• 1998.07b
• /
• pp.537-540
• /
• 1998

This thesis deals with the design problem of the state estimator for digital servo system. Digital servo system has input time delay, which depends on the size of control algorithm. The delayed input is a factor that brings out the state estimation error. So, in order to reduce this state estimation error of the system, we proposes a state estimator in which the delayed input of the system is considered. At first, a discrete-time state-space model is established accounting for the delayed input. Next, the state estimator is designed based on this model. we employ Kalman filter algorithm in design of the state estimator. The performance of proposed state estimator is exemplified via some simulations and experiment for servo system. And robustness of the proposed estimator to modelling error by variation of the system parameter is also shown in these simulations.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.1095-1096
• /
• 2006

Configuration management plays a key role in systems engineering process for any project from earlier stage of development. It consists of five major activities, ie., configuration management planing, configuration identification, configuration control, configuration status accounting and configuration verification and audit, and is essential to control system design development and operation throughout entire life cycle of the system development. And it is directly associated with other part of systems engineering management, ie., technical data management which provides traceability of important decisions and changes during development. In this paper, we describe how to apply CASE(Computer-aided Systems Engineering) tool-Cradle for the configuration management to achieve effectiveness of City Train Standard Specification Management process.

• Smart Structures and Systems
• /
• v.1 no.3
• /
• pp.309-324
• /
• 2005

This paper presents an efficient and accurate coupled beam model for piezoelectric bimorphs based on improved first-order shear deformation theory (FSDT). The model combines the equivalent single layer approach for the mechanical displacements and a layerwise modeling for the electric potential. General electric field function is proposed to reasonably approximate the through-the-thickness distribution of the applied and induced electric potentials. Layerwise defined shear correction factor (k) accounting for nonlinear shear strain distribution is introduced into both the shear stress resultant and the electric displacement integration. Analytical solutions for free vibrations and forced response under electromechanical loads are obtained for the simply supported piezoelectric bimorphs with series or parallel arrangement, and the numerical results for various length-to-thickness ratios are compared with the exact two-dimensional piezoelasticity solution. Excellent predictions with low error estimates of local and global responses as well as the modal frequencies are observed.