• Journal of Biosystems Engineering
• /
• v.19 no.4
• /
• pp.291-300
• /
• 1994

It is desired to operate tractor engines at or near maximum torque much of the time in field operation to increase fuel efficiency. To do this it is necessary to reduce engine speed and to shift gears to higher ratios as frequently as possible. Because of load variations in most drawbar work and inconvenience in gear shift, however, gear-type transmission are usually set in one ratio at unnecessarily high engine speeds, and engine-torque variations are used to compensate for changes in drawbar load. As a result, the most of time the tractor is not operated efficiently in terms of fuel consumption and work output. The objective of this study was to develop an automatic control system which is able to operate a tractor equipped with gear transmission under the optimal condition in terms of fuel efficiency with automatic governor setting and gear shift. An indoor experimental test set which can be used to simulate tractor operation, control engine speed and transmission ratio was developed in the previous paper. In this paper, the performance of the optimal operation system is reported. Through a series of tests, it was found that the automatic control system for optimal operation of tractors with gear transmission had a satisfactory performance.

• Cartoon and Animation Studies
• /
• s.29
• /
• pp.151-172
• /
• 2012

Game production education in a university is very important because it is the stage for completing a game education course as well as for determining a future of game industry. In order to perform various experience and creative learning, it should be able to effectively use a computer infrastructure representing the knowledge and information society for the purpose of obtaining and re-processing information necessary for game production through prediction of directions of game industry as well information technology. This research is focused on an effective game engine education for students whom want to become game graphics designers. The purpose of this study is to draw a lesson of game production utilizing game engines and it enables practice-focused class for game production. It also allows the class participant to manufacture prototypes without support from game programmers for their outcomes of works planned during the game production class. The theoretical background of game production compared and analyzed exemplary game engines. Based on the result, the study selected Unity 3D engine and conducted the research on the background where the Unity engine has been selected and its characteristics. In addition, this study provided an example of game production utilizing a game engine, and also described the details of actual realization. This study selected Torque3D with the Unity in order to identify the purpose of this study and efficiency of learning. Thus, the previous situation is that the class remained in making a game plan during the course of game production project and, students whose major is not game programming. Now, it is necessary for students to make many efforts to make a game in an active and positive attitude by utilizing a game engine beyond the previous method of class.

• Journal of the korean Society of Automotive Engineers
• /
• v.3 no.3
• /
• pp.1-7
• /
• 1981

재래적 자동차의 구동계통은 동력원 즉 engine이 앞에 위치하고 뒤에서 미는 순서로 되어 있다. 그러므로 engine 과 차축을 연결하는 이 축(또는 구동계통)은 engine으로 부터의 힘을 차축으로 전달하는 역할을 하며 기본적으로 비틀상태의 반성부재로서 비교적 큰 회전 insertia를 받게 된다. 구동축은 한 개 또는 그 이상의 universal joint와 solid 상태 또는 관으로 된 축으로 조립 되어 있다. 그리하여 축방향의 동작을 통해서 토오크를 전달하고 일정한 각도 또는 변화되는 각도에서 회전운동을 한다. 차축은 차체 spring을 통해서 부쳐져 있으므로 주행중 구동축은 축 방향의 길이의 변화가 있게 되며 따라서 연결돤 각동작이 일어나며 이를 위해서는 universal joint가 필요하게 되며 따라서 전륜구동차에서도 필요하다. 자동차에 적용되고 있는 구동적에는 두가지 기본형이 있는데 torque tube형 구동방법과 hotchkiss형(또는 open driveline형) 구동방 법이다. Torque tube형 구동방식은 근래에는 사라져 가고 있는데 그 주요원인은 구동계통에서 발생되는 소음이 튜브를 통해 증축 전달되며 수리비용이 비교적 큰 때문이다. 이에 비해 open driveline형의 이점은 제조원가가 낮고, 용이하게 제조할 수 있으며, 종량이 경강되며 장착하기 에도 용이한 점들이다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.4 no.5
• /
• pp.90-99
• /
• 1996

To keep up with the regulation of OBD II(on board diagnostics II), many detection methods for engine misfire have been developed. Among them, the method of using the crankshaft speed fluctuation is the most noticeable in the point of view of lower cost and easier installation than any others. On the basis of the results obtained from the previous engine-dynamometer test, the integrating torque index (ITI) has been introduced. In this research, the instrumental and the interfacing systems to engine control unit(ECU) are developed for the vehicle test. Therefore, the vehicle and chassis-dynamometer test can be carried out in addition to the rough road test. From this test, the previousproposed method proved that it can be applied to the real vehicle.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.5 no.4
• /
• pp.100-109
• /
• 1997

Parameters in the internal combustion engines are variable depending on the operating points. Therefore, it is necessary to compensate for the uncertainties. Form this point of view, this paper gives a controller design method and a robust stability condition by LMI approach for engine torque control which satisfies the gives H$\infty$ control performance in the presence of physical parameter perturbations. To the end, the robustness of the system in the presence of perturbation is guaranteed in the all engine operating regions. Its effectiveness is demonstrated by simulation.

• Transactions of the Korean hydrogen and new energy society
• /
• v.6 no.1
• /
• pp.23-34
• /
• 1995

In order to realize the ultra lean burn, the method of hydrogen supplement in gasoline engine has been examined and analyzed. A small quantity of hydrogen gas was supplied and mixed with gasoline fuel in the intake manifold. As the results, lean limit was extended to fuel-air equivalence ratio 0.35 which normal combustion was impossible by gasoline fuel. The NO and CO were remarkably decreased, and thermal efficiency and torque were increased. It was also found that by considering cycle variation, emission characteristics, torque and thermal efficiency, suitable operate region of hydrogen supplemented gasoline engine was equivalence ratio 0.5.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.8
• /
• pp.54-61
• /
• 2014

This paper proposes a boost/flux-weakening controller (BFWC) for wide speed operation range having engine and interior permanent magnet synchronous generator (IPMSG) for special equipment vehicle. The proposed BFWC exploits direct torque/flux control (DTFC) scheme based on space vector modulation method to control the constant DC voltage output within the entire speed operation range of engine. And, to improve the response characteristics of maximum torque per ampere (MTPA) operation and flux-weakening operation, the MTPA and flux-weakening feed-forward controllers are applied. To estimate feasibility and usefulness of the proposed controller, the simulation and experimental results are compared.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.1
• /
• pp.68-75
• /
• 2000

In this paper, the robust controller design is performed for the speed control of the underwater vehicle diesel engine. Nonlinear model equations are acquired through the mathematical modeling using mean torque production model technique. It is very difficult to design the robust controller because those are high nonlinear and not expressed in terms of the matched uncertainty Therefore those are converted into the separable model into the linear nominal system and the nonlinear uncertainty term.

• Journal of the Korean Society of Safety
• /
• v.12 no.3
• /
• pp.17-22
• /
• 1997

This paper reals with the structure and function of duel mass flywheel. Damping effects of engine rotational fluctuation are compared with those of pre-damper clutch and duel mass flywheel and driven- system behavior is estimated engine idle r.p.m. The reason of gear rattle noise is higher in summer than winter and driving longer period than initial driving is due to affection by drag torque changing. The above-contents can be used on the design of clutch system and transmission matching including engine and duel mass flywheel.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.1 no.2
• /
• pp.1-16
• /
• 1993

It is widely recognized that exhaust emissions, fuel economy and engine torque are affected by engine temperature, and logic would suggest that a cooling system offering a better compromise of engine temperature would improve both overall engine performance and economy. Author measured coolant temperature of some parts and flow rate which are necessary to heat transfer in a engine. And Author determined parameters necessary for the optimum design of a thermostat to keep the best engine performance ; determined the optimum operating temperature of electric cooling fan. A summary of this study is followed. 1. Study of the effects of cooling condition to combustion character in a engine. 2. Analyze of heat transfer surrounding engine cylinders. 3. Study of the effects of cooling character to engine heat rejection, determination of the optimum collant temperature for keeping the optimum engine performance and determination of the optimum design of a thermostat for keeping that temperature.