• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.1218-1222
• /
• 2006

The bolts fixing the valve cover to the engine were often reported to be failed in a wheel loader model. Recently this failures were continually repeated in the specified equipment. In order to identify the fatigue fractures of the bolts, various vibration tests were carried out. From these tests, it was found out that the failure was due to the resonance between the excitation force of engine and the transverse mode of engine valve cover. So, the several modifications for the bolts were considered to avoid the resonance. Finally, the bolt failure problem was clearly resolved.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 춘계학술대회 논문집
• /
• pp.1079-1080
• /
• 2012

• Composites Research
• /
• 제20권3호
• /
• pp.63-66
• /
• 2007

Structural analysis of automotive engine cover under vibration excitation is performed by finite element analysis (FEA) in order to identify the critical area of the structure. Assembly load due to the tightening of the bolts as well as the vibration excitation were considered to describe the actual loading condition. Natural frequencies of the system were extracted considering the damping effect of the structure. Dynamic analysis was performed based on the extracted natural frequency of the system. Experimental modal analysis (EMA) and measurement of strains were performed to verify the results of the analysis. Analysis results correlated closely with the experimental results. Analysis and experiments showed that contribution of the assembly load should not be ignored to predict the structural failure of the engine cover.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.554-559
• /
• 2007

The cylinder cover stud for assembling the combustion chamber components of low-speed marine diesel engine is one of the main structural components in engine. To understand the structural behavior of the stud is quite important for safe and economic design of it. In this paper, the structural behavior and design adequacy of the stud have been evaluated through strain measurement and structural analysis for the world's two largest engine types. Moreover, a feasibility study for design modification was carried out based on fatigue test and calculation. The results showed that 1) the stud experiences very high stress ratio under normal operating conditions, 2) the fatigue strength of the stud is sufficient, and 3) results from strain measurement and structural analysis were quite close each other.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1996년도 추계학술대회논문집; 한국과학기술회관, 8 Nov. 1996
• /
• pp.56-64
• /
• 1996

In this paper, the sound radiation level of parts of a O.B. Motor was measured and analyzed by the measurement method using wave-guide reverberation environment. Based on the above measurement results, a noise control was established for engine cover and exhaust silencer and its effects were compared and analyzed. The noise control method increased transmission loss by painting GELNAC on the engine cover and extend exhaust pipe to reach under water.

• 한국추진공학회지
• /
• 제13권4호
• /
• pp.55-62
• /
• 2009

본 연구에서는 액체연료와 고체연료를 추진제로 사용하는 공기흡입식 추진기관의 세라믹 돔포트 커버의 파괴거동을 수행하였다. 파괴 특성은 충격파관을 이용하여 세라믹을 이용한 돔포트 커버 상사모델을 통하여 파괴시험 및 분석되었다. 파괴 거동은 압력센서를 통하여 파괴 압력을 측정하고 초고속 카메라를 이용하여 비산현상을 관찰하였다. 본 연구로부터 얻어진 결과는 공기흡입식 추진기관에서 돔포트커버 설계의 기초 자료로 이용될 수 있을 것이다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2009년도 춘계학술대회 논문집
• /
• pp.103-106
• /
• 2009

Fracture characteristics of plate shape using shock tube for glass filled ceramics was carried out. Glass filled ceramics have been considered as a promising candidate material for the dome port cover of air breathing engine. This part of the air breathing engine has an important role separating solid and liquid fuel, and needs the frangible characteristics that the fracture of a part should not affect the internal components of combustion. The objectives of this study are to evaluate the fracture pressures for various thicknesses and diameters of shock impact area. Also fracture phenomena of separated membrane using a shock tube are observed. The experimental apparatus of shock tube consists of a driver, a driven section and a dump tank. The used material is glass filled ceramic made from Corning company. Specimens are used 3, 4.5 and 6mm thickness. Also diameters of shock wave area are chosen 70, 60 and 50 mm. It is expected that the results obtained from this study can be used in the basic data for the dome port cover design of an air breathing engine.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2006년도 전기학술대회논문집
• /
• pp.267-268
• /
• 2006

The cylinder cover stud of low-speed marine diesel engine is more than just a stud. It is a large structural element occasionally weighing over 200 kg used for assembling the combustion chamber components. Therefore, to understand the structural behavior of the stud and design it safely is quite important considering a catastrophic failure which can be arisen from an inadequate use of it. In this paper, the analysis results of the structural behavior of the stud is introduced. Strain measurement results compared with FE analysis results are summarized. The results showed that 1) the stud stress increased with engine operating load, 2) the maximum stress amplitude was about 10 MPa which is far smaller than the stud's fatigue strength of 61 MPa, 3) the stress ratio is higher than 0.9 and the stud's load factor is about 20 %, and 4) about 7 % of initial pressure tightening load was reduced while changing to a nut tightened condition.

• 한국자동차공학회논문집
• /
• 제9권1호
• /
• pp.102-111
• /
• 2001

To describe the air flow characteristics within an air cleaner cover and mass air flow sensor (MAFS) entry region installed in a 3.0L engine air induction system, flow visualization, velocity and turbulence intensity measurements were taken in several view planes. A detailed knowledge of the interaction between the design parameters and the flow structures will enhance our understanding of the motions within the flow field and enable engineers to optimize the induction system and reduce the signal-to-noise ratio in the MAFS output. Emphasis is placed on the analysis of coherent motions and the controlling parameters which affect the air flow in the MAFS entrance region over a flow rate of 13-240 kg/hr. The high speed motion pictures illustrated that the air flow generated within the air cleaner cover under steady state condition is quite complex. In both axial and radial planes of the main passage it was found that the flow pattern is remarkably influenced by the air cleaner cover and main passage configuration. A comparison of the flow patterns and measurements in the original and modified air cleaner cover is presented. Measurements from the MAFS indicated an significant reduction in pressure drop and signal noise for the modified cover as compared with the original cover, over an air flow rate of 13-240 kg/hr.

• 항공우주기술
• /
• 제4권2호
• /
• pp.27-35
• /
• 2005

본 연구에서는 에어터보램제트(ATR) 엔진의 탈설계점 성능해석을 위한 코드를 개발하고 이를 이용하여 기 설계된 ATR 엔진에 대한 탈설계점 성능해석을 수행하였다. 미리 정의한 작동 영역 중 중요 작동점을 정의하여 성능해석을 수행하였으며, 작동 영역이 넓음을 고려하여 가변 흡입구 및 가변 노즐을 사용하는 것으로 가정하였다. 각 요소 부품은 탈설계점 성능을 계산할 수 있도록 수학적 모델을 개발하였으며, 이 과정에서 일부 설계 개념을 도입하여 각 요소 부품의 설계 인자에 따른 성능 변화도 계산하였다. 성능해석 결과 기 설계된 엔진은 ATR 비행체의 임무 영역(마하 6.0, 고도 30km)을 모두 달성하기 어렵고, 낮은 마하 수에서 예냉각기의 역할이 크지 않음을 알 수 있었다.