• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2005년도 추계 학술대회논문집
• /
• pp.219-222
• /
• 2005

Recently, the interest of the engine capacity and environment of the atmosphere is increasing, so the researches for the engine capacity have been conducted for a long time. But the internal environment of an automotive engine is very severe. A piston is exposed to combustion gas of over $2000^{\circ}C$ and strong friction is occurred by high speed motion in the cylinder. The fraction between piston and wall of the cylinder causes the increase of temperature in the engine. The temperature of the engine has an effect on the engine capacity. If the temperature is high, the capacity of the engine is low. So we have to maintain the optimum temperature. To maintain the optimum temperature, the enough flow rate of the engine oil is needed. The oil jet is used to control the flow rate of the engine oil and supply the engine oil to the piston and cylinder. The purpose of this study is to check the mass flow rate of the engine oil and the characteristics of internal flow of the oil jet. Flow pattern of the engine oil is very important because it concludes the loss in the oil jet. This study is the previous research about the oil jet and we will consider the movement of the ball check valve to get more accuracy result.

• 한국해양환경ㆍ에너지학회지
• /
• 제15권1호
• /
• pp.19-21
• /
• 2012

내연 기관의 엔진오일은 열화작용에 의해서 수명이 짧아지고 대기오염을 유발하게 된다. 엔진오일의 상태를 정확히 측정하여 새오일로 교환함으로 엔진의 수명 연장 및 환경오염을 줄일 수 있다. 정전용량 프로브는 엔진오일과 같은 유체의 유전율을 측정하는데 사용 할 수 있다. 본 논문은 엔진 오일의 열화 정도에 따라서 달라지는 유전율 특성을 분석하였다. 오일의 상태에 따라서 달라지는 프로브의 정전용량을 각각 LCR Meter로 측정하여 엔진오일의 유전율을 계산하였다. 또한, 프로브의 크기에 따른 정전용량의 변화를 측정하여 유전율 측정의 정확도를 제시한다. 오염된 오일 일수록 유전율이 증가하며, 유전율로 오일의 오염정도를 판단하는 것이 가능하다.

• 한국해양환경ㆍ에너지학회지
• /
• 제15권1호
• /
• pp.22-24
• /
• 2012

엔진오일 상태에 따라서 엔진 오일의 유전율이 변화하게 된다. 오일의 유전율은 프로브의 특성 임피던스와 관계가 있으며, 프로브의 특성 임피던스는 프로브 입력단의 반사 신호를 결정한다. 본 논문에서는 프로브의 등가회로를 유도하고 정전용량 측정에 의해서 구한 유전율의 변화에 따른 프로브의 반사 계수를 이론적으로 계산 하였다. 결과로 오일의 상태가 열화 되면 반사 계수가 증가 되는 것을 알 수 있다.

• 한국해양환경ㆍ에너지학회지
• /
• 제15권1호
• /
• pp.25-29
• /
• 2012

본 논문은 프로브의 반사계수를 이용하여 엔진오일의 열화정도를 측정하기 위해 반사 계수를 측정하는 회로를 설계한다. 프로브에 펄스를 인가하고 반사 신호를 측정할 수 있는 회로를 구현 하였다. 엔진오일의 상태가 열화 될 수록 반사 신호는 증가하는 것을 알 수 있었고, 엔진오일의 온도가 상승함에 따라 열화된 엔진오일의 유전율이 감소하는 현상을 측정하였다. 결론적으로, 프로브의 반사 계수를 이론치와 측정치를 비교 분석하였다.

• 한국자동차공학회논문집
• /
• 제10권2호
• /
• pp.15-22
• /
• 2002

Lately, our world is faced with very serious problems related to the increased air pollution of the exhaust emissions from automobiles. In particular, the exhaust emissions of diesel engines are recognized as a main cause which strongly influence environment. Lots of researchers have attempted to develop various alternative fuels to reduce these harmful emissions in diesel engine. The purpose of this investigation is to evaluate the possibility of esterfied rice bran oil for diesel fuel substitution in a naturally aspirated D. 1. diesel engine, and also find means to reduce smoke emissions in esterfied rice bran oil combustion. The smoke emission of esterfied rice bran oil is reduced remarkably in comparison with commercial gas oil, that is, it was reduced approximately 58.2% at 2500rpm. But, power, torque and brake specific energy consumption didn't have no large differences. It was concluded that esterfied rice bran oil can utilize effectively as an alternative and renew- able fuel fur diesel engine.

• 한국산업융합학회 논문집
• /
• 제12권4호
• /
• pp.209-214
• /
• 2009

Usually, it says that reliability is failure rate achieved by required functions for some period under limited use environment conditions. The reliability can be researched by automotive part or system module and it can be affected by using environment condition, such as using atmosphere temperature and using user's behavior. Also, the time can be influence on the reliability. Recently, the oil leakage from eng oil pan was raised by customer in the field. So, there is the purpose of this paper that research predicting the reliability of eng oil pan efficiently by using reliability method described below.

• 동력기계공학회지
• /
• 제19권2호
• /
• pp.90-95
• /
• 2015

Recently worldwide concern and research is being actively conducted on green energy which can reduce environmental pollution. A plant such as the natural rapeseed oil, soybean oil, palm, etc. is used as a bio source in home and industry. Biofuels is a sustainable fuel having economically benefits and decreasing environmental pollution problems caused due to fossil fuel, and it can be applied to the conventional diesel engine without changing the existing institutional structure. Waste vegetable oil contains a high cetane number and viscosity component, the low carbon and oxygen content. A lot of research is progressing about the conversion of waste vegetable oil as renewable clean energy. In this study, waste oil was prepared to waste cooking oil generated from the living environment, and applied to diesel engine to confirm the possibility and cost-effectiveness of biodiesel blend waste oil. As a result, brake specific fuel consumption and NOx was increased, carbon monoxide and soot was decreased.

• Environmental Engineering Research
• /
• 제23권3호
• /
• pp.242-249
• /
• 2018

The use of palm oil and diesel blended with ethanol, known as a microemulsion biofuel, is gaining attention as an attractive renewable fuel for engines that may serve as a replacement for fossil-based fuels. The microemulsion biofuels can be formulated from the mixture of palm oil and diesel as the oil phase; ethanol as the polar phase; methyl oleate as the surfactant; alkanols as the cosurfactants. This study investigates the influence of the three cosurfactants on fuel consumption and exhaust gas emissions in a direct-injection (DI) diesel engine. The microemulsion biofuels along with neat diesel fuel, palm oil-diesel blends, and biodiesel-diesel blends were tested in a DI diesel engine at two engine loads without engine modification. The formulated microemulsion biofuels increased fuel consumption and gradually reduced the nitrogen oxides ($NO_x$) emissions and exhaust gas temperature; however, there was no significant difference in their carbon monoxide (CO) emissions when compared to those of diesel. Varying the carbon chain length of the cosurfactant demonstrated that the octanol-microemulsion fuel emitted lower CO and $NO_x$ emissions than the butanol- and decanol-microemulsion fuels. Thus, the microemulsion biofuels demonstrated competitive advantages as potential fuels for diesel engines because they reduced exhaust emissions.

• 소성∙가공
• /
• 제27권6호
• /
• pp.339-346
• /
• 2018

This study investigated the microstructure and wear properties of extruded hyper-eutectic Al-Si (15wt.%) alloy in an engine oil environment. The wear mechanism of the material was also analyzed and compared to conventional gray cast iron. In microstructural observation results of Al-15wt.%Si alloy, primary Si phase ($45.3{\mu}m$) and eutectic Si phase ($3.1{\mu}m$) were found in the matrix, and the precipitations of $Mg_2Si({\beta}^{\prime})$, $Al_2Cu({\theta}^{\prime})$ and $Al_6(Mn,Fe)$ were also detected. In the case of gray cast iron, ferrite and pearlite were observed. It was also observed that flake graphite ($20-130{\mu}m$) were randomly distributed. Wear rates were lower in the Al-Si alloy as compared to those of gray cast iron in all load conditions, confirming the outstanding wear resistance of Al-15wt.%Si alloy in engine oil environment. In the $4kg_f$ condition, the wear rate of gray cast iron was $6.0{\times}10^{-5}$ and that of Al-Si measured $0.8{\times}10^{-5}$. The microstructures after wear of the two materials were analyzed using scanning electron microscope (SEM) and electron backscatter diffraction (EBSD). The primary Si and eutectic Si of Al-Si alloy effectively mitigated the abrasive wear, and the Al matrix effectively endured to accept a significant amount of plastic deformation caused by wear.

• 해양환경안전학회지
• /
• 제14권1호
• /
• pp.83-87
• /
• 2008

산유국으로부터 에너지 독립을 하고 대기오염방지를 위한 배기배출물을 저감시키기 위하여 대체연료에 많은 관심을 가지고 있다. 폐유나 새로운 식물성 기름과 동물성 기름으로부터 생성할 수 있는 바이오디젤유가 압축점화기관인 디젤기관에 구조적인 변화없이 사용될 수 있다. 이 논문에서는 4행정 직접분사식 디젤기관을 이용하여 순수 디젤유와 바이오디젤 혼합유(바이오디젤 10% 및 20% 함유)의 연료소비율과 배기배출물에 미치는 영향을 제시했으며, 특히 실험에 사용된 바이오디젤 연료는 우리 실험실에서 유채유로부터 직접 생산되었다. 이 연구 결과 바이오디젤 혼합유가 디젤유 보다 연료소비율과 질소산화물은 약간 증가 되었고 일산화탄소와 매연은 상당히 감소되었다.