• 대한전기학회논문지:전력기술부문A
• /
• 제50권7호
• /
• pp.333-339
• /
• 2001

The transmission networks are not perfect conductors and a percentage of the power generated is therefore lost before it reaches the loads. This network loss effects to the cost of suppling power to consumers, and must be considered if the most efficient dispatch and location of generators and loads is to be achieved. In this paper, we propose an approximate calculation of marginal loss factors to analyze characteristics of transmission loss of KEPCO power system. These static marginal loss factors are approximately calculated based on the KEPCO's expected summer peak load data of year 2000.

• 한국전산구조공학회논문집
• /
• 제15권1호
• /
• pp.1-8
• /
• 2002

물체가 수중에 입수할 때, 원래의 운동에너지는 물체와 그 주위의 물에 부가질량 형태로 분배된다. 이러한 에너지 혹은 운동량의 전달에 기인하여 물체는 유체동력학적 충격력과 가속도를 받는다. 이러한 충격거동은 수중운동체의 공중 발사에 중요한 고려 요인이 된다. 본 논문에서는 구명정 모델을 바탕으로 원통형 물체의 입수에 대한 충격거동을 해석하는 근사기법을 제안하였다. 충격력은 von Karman의 운동량 이론으로 계산하고, 운동, 특히 가속도는 유체동력학적 힘의 평형에 의하여 유도된 운동방정식의 수치 적분으로 계산하였다. 제안된 방법은 입수충격을 받는 물체의 초기설계나 운동 해석을 위한 단순하면서도 효과적인 방안이 될 수 있을 것으로 기대된다.

• Earthquakes and Structures
• /
• 제23권4호
• /
• pp.363-371
• /
• 2022

Traditional metal dampers have disadvantages such as a higher yield point and inadequate adjustability. The experimental results show that the low yield point steel has superior energy dissipation hysteretic capacity and can be applied to seismic structures. To overcome these deficiencies, a novel compound metal damper comprising both low yield point steel plates and common steel plates is presented. The optimization objectives, including "maximum rigidity" and "full stress state", are proposed to obtain the optimal edge shape of a compound metal damper. The numerical results show that the optimized composite metal damper has the advantages such as full hysteresis curve, uniform stress distribution, more sufficient energy consumption, and it can adjust the yield strength of the damper according to the engineering requirements. In view of the mechanical characteristics of the compound metal damper, the equivalent model of eccentric cross bracing is established, and the approximate analytical solution of the yield strength and the yield displacement is proposed. A nonlinear simulation analysis is carried out for the overall aseismic capacity of three-layer-frame structures with a compound metal damper. It is verified that a compound metal damper has better energy dissipation capacity and superior seismic performance, especially for a damper with double-objective optimized shape.

• 태양에너지
• /
• 제15권2호
• /
• pp.25-37
• /
• 1995

유입관성에 의한 유체혼합뿐 아니라 입구온도의 변화까지 고려된 성층축열조의 충전과정 모델에 대하여 해석적 근사해를 제시하였다. 해석모델은 깊이가 일정한 완전혼합 및 압출유동영역으로 구성되며, 입구온도의 변화는 중첩의 원리에 근거하여 계단함수로 근사화하였다. 완전혼합영역의 과도온도를 구한 후 함수형태에 따라 구분하고, 각각을 경계조건으로 하는 압출유동영역의 온도분포를 잘 정의된 함수의 항으로 유도하였다. 결과적으로 이들의 일차결합이 압출유동영역에 대한 최종해이다. 근사해의 타당성 및 결과의 유용성은 입구온도가 선형적으로 증가하는 경우에 대한 엄밀해와의 비교를 통하여 검증하였다. 계단수의 증가에 따라 근사해는 엄밀해로 급속히 접근하며, 유한한 수의 계단에 의한 근사해도 광범위한 혼합깊이에 대하여 엄밀해와 잘 일치한다. 또한, 혼합깊이가 클수록 소수의 계단에 의한 근사해로도 의미있는 예측결과를 얻을 수 있었다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제25권1호
• /
• pp.182-190
• /
• 2001

The aerodynamics of the Wells turbine has been studied using 3-d, unstructured mesh flow solver for the Reynolds-averaged Navier-Stokes equations. The basic feature of the Wells turbine is that even though the cyclic airflow produces oscillating axial forces on the airfoil blades, the tangential force on the rotor is always in the same direction. Geometry used to define 3-D numerical grid is based upon that of an experimental test rig. The 3-D Wells turbine model, consisting of approximate 220,000 cells is tested of four axial flow rates. In the calculations the angle of attack has been varied between 10˚ and 30˚ of blades, Representative results from each case are presented graphically andy analysed. It is concluded that this technique holds much promise for future development of Wells turbines.

• Smart Structures and Systems
• /
• 제18권1호
• /
• pp.183-196
• /
• 2016

In this paper a nonlinear, bistable, single degree of freedom system is considered. It consists of a Duffing oscillator externally excited by a non-resonant, harmonic force. A customized perturbation scheme is proposed to achieve an approximate expression for periodic solutions. It is based on the evaluation of the quasi-steady (slow) solution, and then on a variable change followed by two perturbation steps which aim to capture the fast, decaying contribution of the response. The reconstructed solution, given by the sum of the slow and fast contributions, is in a good agreement with the one obtained by numerical integration.

• 설비공학논문집
• /
• 제25권2호
• /
• pp.109-118
• /
• 2013

The absence of a simple and general analytical model has been a problem in the design and analysis of desiccant-assisted air-conditioning systems. In this study, such an analytical model has been developed based on the approximate integral solution of the coupled transient ordinary differential equations for the heat and mass transfer processes in a desiccant wheel. It turned out that the initial conditions should be determined by the solution of four linear algebraic equations including the heat and mass transfer equations for the air flow as well as the energy and mass conservation equations for the desiccant bed. It is also shown that time-averaged exit air temperature and humidity relations could be given in terms of the heat and mass transfer effectiveness.

• International Journal of Internet, Broadcasting and Communication
• /
• 제14권3호
• /
• pp.79-84
• /
• 2022

Towards the sixth generation (6G) mobile networks, spectrum and energy efficiency of non-orthogonal multiple access (NOMA) transmissions in the fifth generation (5G) wireless system have been improved by intelligent reflecting surface (IRS) technologies. However, the reflecting devices of an IRS tend to be correlated because they are placed close on the surface each other. In this paper, we present an analysis on the correlated IRS in NOMA cellular networks. Specifically, we consider the bit-error rate (BER) performances for correlated-IRS in NOMA networks. First, based on the central limit theorem, we derive an approximate analytical expression of the BER for correlated-IRS NOMA systems, by using the second moment of the channel gain. Then we validate the proposed analytical BER by Monte Carlo simulations, and show that they are in good agreement. In addition, we also show numerically the BER improvement of the correlated-IRS NOMA over the conventional independent-IRS NOMA.

• Nuclear Engineering and Technology
• /
• 제53권1호
• /
• pp.103-110
• /
• 2021

In the development of a Risk Monitor probabilistic safety assessment (PSA) model from the basic PSA model of a nuclear power plant, the modeling of common-cause failure (CCF) is very important. At present, some approximate modeling methods are widely used, but there lacks criterion of modeling accuracy and error analysis. In this paper, aiming at ensuring the accuracy of risk assessment and minimizing the Risk Monitor PSA models size, we present three basic issues of CCF model resulted from the changes of a nuclear power plant configuration, put forward corresponding modeling methods, and derive accuracy criteria of CCF modeling based on minimum cut sets and risk indicators according to the requirements of risk monitoring. Finally, a nuclear power plant Risk Monitor PSA model is taken as an example to demonstrate the effectiveness of the proposed modeling method and accuracy criteria, and the application scope of the idea of this paper is also discussed.

• 대한토목학회논문집
• /
• 제4권4호
• /
• pp.1-11
• /
• 1984

콘크리트의 복잡한 파괴거동(破壞擧動)을 모델할 수 있는 비선형파괴이론(非線型破壞理論)이 본(本) 논문(論文)에서 유도되었다. 본(本) 이론(理論)은 콘크리트균열끝의 파괴진행대(破壞進行帶)에서의 미세균열현상(微細龜裂現象)과 변형연화현상(變形軟化現象)으로 인한 비선형거동(非線型擧動)에 그 근거(根據)를 두고 있다. 이로부터 실제적이고도 단순화(單純化)된 파괴해석(破壞解析)모델이 유도되었으며, 이 단순화된 모델은 파괴진행대(破壞進行帶)의 변화에도 콘크리트의 파괴(破壞)에너지를 일정하게 유지할 수 있는 특정을 가지고 있다. 파괴해석(破壞解析)에 비선형응력(非線型應力)-변형거동(變形擧動)을 이용함으로써 균열면에 평행하게 작용하는 압축응력에 대한 영향이 쉽게 고려될 수 있다. 본 모델을 콘크리트의 많은 파괴실험자료와 비교한 결과 만족스러운 결과를 얻었으며, 종래의 선형파괴이론에 의한 결과는 실제 콘크리트 실험결과와 많은 차이를 보이고 있음을 알 수 있다. 콘크리트 구조의 균열 및 파괴해석에 필요한 콘크리트 파괴에너지의 근사공식이 본 이론으로부터 유도되었다. 끝으로, 철근콘크리트에 대한 파괴이론의 응용 및 확장연구 문제가 토의되었다.