• Proceedings of the Korea Information Processing Society Conference
• /
• 2008.11a
• /
• pp.1324-1327
• /
• 2008

본 논문에서는 무선 센서 네트워크의 에너지 제약 조건 및 지연을 개선하기 위하여 이웃 노드의 최단 홉 및 잔존 에너지를 이용한 라우팅 알고리즘을 제안하였다. 제안하는 알고리즘은 센서 네트워크의 대다수의 통신 방향이 데이터를 감지한 노드에서 싱크 노드라는 것을 고려하여 싱크노드에서 네트워크 셋업 시간에 각 노드들이 싱크노드로의 홉 수를 이웃노드 끼리 서로 공유할 수 있게 하여 라우팅 지연을 줄인다. 또한 라우팅 시 이웃노드의 배터리 상태를 고려할 수 있는 방법을 제안하여 전체 노드의 평균 수명을 늘일 수 있는 방법을 제시한다. 성능 비교를 위해 AODV와 Directed diffusion과 비교하여 네트워크 규모에 따른 지연시간 및 패킷 당 소모되는 배터리 소모량을 비교했을 때 제안하는 스킴이 우수하다는 것을 알 수 있다.

• International conference on construction engineering and project management
• /
• 2011.02a
• /
• pp.162-167
• /
• 2011

Construction projects are full of risks. This is particularly the case in civil construction projects that are often featured with large scale, complexity and involving a large number of participating parties. The eventuation of risks typically results in extended project durations leading to an increase in the total project budget. The consequence can be amplified considering the significant impacts of civil construction projects on the society, from economical, environmental and social perspectives. This research investigates the significance of risks within civil construction projects and approaches to deal with risks. Semi-structured interviews were undertaken with local industry practitioners in South Australia on this matter. It is found that the industry is fairly aware of risks associated with civil construction projects and subsequently has procedures in place to attempt to minimize the impacts of these risks on the project outcomes. The interview results also indicate that there is limited utilization of software for the risk management purpose from the cost estimation perspective.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.10
• /
• pp.691-699
• /
• 2014

In order to increase network lifetime, duty-cycle MAC protocols which can reduce energy consumption caused by idle listening is proposed for WSNs. In common duty-cycle MAC protocols, each sensor node calculates its duty-cycle interval based on the current amount of residual energy. However, in WSNs with the capability of energy harvesting, existing duty-cycle intervals based on the residual energy may cause the sensor nodes which have high energy harvesting rate to suffer unnecessary sleep latency. Therefore, a duty-cycle scheduling scheme which adjust the duty-cycle interval based on both of the residual energy and the energy harvesting rate was proposed in our previous work. However, since this duty-cycle MAC protocol overlooked the performance variation according to the change of duty-cycle interval and adjusted the duty-cycle interval only linearly, the optimal duty-cycle interval could not be obtained to meet application requirements. In this paper, we propose three methods which calculate the duty-cycle interval and analyse their results. Through simulation study, we verify that network lifetime, end-to-end delay and packet delivery ratio can be improved up to 23%, 44% and 31% as compared to the existing linear duty-cycle scheduling method, respectively.

• The KIPS Transactions:PartB
• /
• v.12B no.6 s.102
• /
• pp.679-684
• /
• 2005

There are a few representative wireless network access technologies used widely. WWAN is celluar based telecommunication networks supporting high mobility, WLAN ensures high data rate within hotspot coverage, and WDMB support both data and broadcasting services correspondingly. However, these technologies include some limitations especially on the mobility, data rate, transmission direction, and so on. In order to overvome these limitations, there are various studies have been proposed in terms of 'Vortical Handoff' that offers seamless connectivity by switching active connection to the appropriate interface which installed in the mobile devices. In this paper, we propose the interface selection algorithm and network architecture to maximize the life time of entire system by minimizing the unnecessary energy consumption of another interfaces such as WLAN, WDMB that are taken in the user equipment. In addition, by using the results of analyzing multiple types of traffic and managing user buffer as a metric for vertical handoff, we show that the energy efficiency of our scheme is $75\%$ and $34\%$ than typical WLAN for WDMB and WLAN preferred schemes, correspondingly.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.1
• /
• pp.115-120
• /
• 2013

There are lots of vulnerability and chance to be attacked in wireless sensor networks, which has many applications. Among those attacks, sybil attack is to generate a lot of false node and to inject false information into networks. When a user uses such false information without recognizing the attack, there might be a disaster. Although authentication method can be used to protect such attack, the method is not a good choice in wireless sensor networks, where sensor nodes have a limited battery and low power. In this paper, we propose a novel method to detect sybil attack with a little extra overhead. The proposed method use the characteristics that there is a weak connection between a group of normal nodes and a group of false nodes. In addition, the method uses energy aware routing based on random routing and adds a little information into the routing. Experimental results show that the proposed method detects false node by more than 90% probability with a little energy overhead.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.4 s.346
• /
• pp.22-30
• /
• 2006

In this paper, the goal of our proposed algorithm is to reduce link -failure and route failure caused by dead nodes which consume all of the battery life. I propose an algorithm which provides a ability of changing mutes to neighbor nodes before some of intermediate nodes be shutting don to get the stable route maintenance. To achieve this goal, The proposed routing algerian uses additional new messages to check energy status for monitoring energy of neighbor nodes and to change the path to a neighbor node. From extensive simulations, results show that possibility of cut-offs and time-delay cause of packet-loss have been decreased and also the improvement of transmission effectiveness.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.6
• /
• pp.219-228
• /
• 2007

End-to-end path setup and maintenance are very important for mobile ad-hoc wireless communications, because of the mobility and the limited battery capacity of the nodes in the networks. the AODV routing protocol is the one of mary proposed protocols. However, there are route failure problem with the Proposed protocols between intermediate nodes due to such mobility and exhausted battery characteristics, and this is because only the shortest hop count is considered for the route setup. If route failure happens. Problem such as the waste of bandwidth and the increment of the energy consumption occur because of the discarding data packets in the intermediate nodes and the path re-setup process required by the source node. In addition, it obviously causes the network lifetime to be shortened. This paper proposes a routing protocol based on the AODV routing protocol that it makes use of the remaining energy, signal strength and SNR of the MAC layer resources to setup a path.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.5
• /
• pp.887-898
• /
• 2009

Conventional routing protocols proposed for wireless sensor networks (WSNs) cannot fully accommodate the characteristics of WSNs. In particular, although it is possible to largely obtain benefits in the solution of energy consumption and global identification problems through applying position information, there are few protocols that actively apply such position information. In the case of geographical and energy aware routing (GEAR) that is a typical algorithm, which uses position information, it does not fully represent the characteristics of WSNs because it is limited to forward query messages and assumed as fixed network environments. The routing protocols proposed in this paper defines the direction of data, which is routed based on the position information of individual and target nodes, in which each node configures its next hop based on this direction and routes signals. Because it performs data-centric routing using position information, it does not require certain global identifications in order to verify individual nodes and is able to avoid unnecessary energy consumption due to the forwarding of packets by defining its direction.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.5B
• /
• pp.274-286
• /
• 2005

In this paper, we propose a new power-efficient and reliable connected dominating set based routing protocol in the mobile ad hoc networks. Gateway nodes must be elected in consideration of residual energy and mobility because frequent reconstruction of connected dominating set result in transmission error for route losses. If node density is high, it results in a lot of contentions and more delays for network congestion. Therefore, in this paper, we propose a new construction method of connected dominating set that supports reliable and efficient data transmission through minimizing reconstruction of connected dominating set by delaying neighbor set advertisement message broadcast in proportion to weighted sum of residual energy, mobility, and the number of neighbor nodes. The performance of the proposed protocol is proved by simulation of various conditions.

• Journal of Internet Computing and Services
• /
• v.14 no.5
• /
• pp.39-48
• /
• 2013

A cloud system has to deal with highly variable workloads resulting from dynamic usage patterns in order to keep the QoS within the predefined SLA. Aside from the aspects regarding services, another emerging concern is to keep the energy consumption at a minimum. This requires the cloud providers to consider energy and performance trade-off when allocating virtualized resources in cloud data centers. In this paper, we propose a resource provisioning approach based on dynamic thresholds to detect the workload level of the host machines. The VM selection policy uses utilization data to choose a VM for migration, while the VM allocation policy designates VMs to a host based on its service reputation. We evaluated our work through simulations and results show that our work outperforms non-power aware methods that don't support migration as well as those based on static thresholds and random selection policy.