• Journal of the Korean Home Economics Association
• /
• v.43 no.12 s.214
• /
• pp.61-78
• /
• 2005

This study was peformed to assess the relationships among bone mineral density(BMD), nutrient intake and lifestyle factors in postmenopausal women. A trained nutritionist examined the interviewed usual dietary intake and physical activity of 85 subjects in Chungnam with a questionnaire interview, and BMDs of the lumbar spines($L_2-L_4$), femoral necks(FN), ward's triangles(WT) and trochanters(TR) were measured by dual energy X-ray absorptiometry (DEXA). The BMDs(T-score) of $L_2-L_4$, FN, and WT were $0.996g/cm^2(-1.601),\;0.697g/cm^2(-1.697)$, and $0.793g/cm^2(-1.512)$, respectively, which were assessed as osteopenia by T-score,. and TR was normal at $0.718g/cm^2(-0.675)$. Subjects included 85 in Chungnam were divided into three groups according to the BMD measurement of the $L_2-L_4$ and FN assessed by T-score. The percentages of the osteoporosis, osteopenia, and normal groups were $32.9\%,\;42.4\%$ and $24.7\%$ respectively. The average age was significantly the highest of the osteoporosis group than in the other two osteopenia or normal groups(P<0.001). Among lifestyle factors, the BMD of lifestyles was significantly related with exercise but it was not significant with medication., salt. intake, bone fracture, coffee consumption, drinking and smoking. The nutrient intake of the subjects was most nutrient intake adequate to the Korean RDA level for most nutrients excepting energy intakes and calcium. The BMD of lumbar spines $L_2-L_4$ showed significant positive association with the intake of most nutrients except carbohydrate, especially in the normal group. The Higher BMD levels were found for those with high intake of protein and vitamin B1. The BMDs of $L_2-L_4$, and FN were positively correlated with showed energy expenditure, exercise, miscellaneous activity, per weekend and week(P<0.05) in normal group but that was showed negatively correlated in the osteopenia group. Therefore, this study confirmed that one of the most effective ways to minimize bone less in postmenopausal women is to maintain an adequate intake of calcium and other nutrients and regular physical activity.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.11 no.3
• /
• pp.193-198
• /
• 2013

In general, boron recovery of 40-90% could be achieved by Reverse Osmosis (RO) membranes in neutral pH condition. As an emerging technology, Forward Osmosis (FO) membrane has attracted growing interest in wastewater treatment and desalination. The objective of this study is to evaluate the possibility of the boron removal in radioactive liquid waste by FO. In this study, the performance of FO was investigated to remove boron in the simulated liquid waste as the factors such as pH, osmotic pressure, ionic strength of solution, etc. The pH of feed solution is a major operating parameter which strongly influences to the permeation of boron and more than 80% of boron content can be separated when conducted at pH values less than 7. The water flux is not influenced but the boron flux and permeation rate tends to decrease in the low salt concentration of 1,000 mg/L. The boron flux increases linearly, but the permeation ratio of reducing boron is nearly constant even with changes in the draw solution concentration.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.9
• /
• pp.4627-4634
• /
• 2013

Carbon dioxide is one of the main causes of global warming. In order to develop a novel absorbent, the characteristics of amino acid salts solution as a solvent for $CO_2$ capture in continuous process were investigated. The cost of $CO_2$ capture is almost 70% of total cost of CCS (carbon dioxide capture and storage). In the carbon dioxide capture process, process maintenance costs consist of the absorbent including the absorption, regeneration, degradation, and etc. It is very important to study the characteristics of absorbent in continuous process. In this study, we have investigated the properties of potassium L-lysine (PL) for getting scale-up factors in continuous process. To obtain optimum condition for removal efficiency of $CO_2$ in continuous process by varying liquid-gas (L/G) ratio, concentration of $CO_2$ and absorbent (PL) were tested. The stable condition of absorber and regenerator (L/G) ratio is 3.5. In addition, PL system reveals the highest removal efficiency of $CO_2$ with 3.5 of L/G and 10.5 vol% $CO_2$ ($1.5Nm^3/h$).

• Membrane Journal
• /
• v.34 no.2
• /
• pp.87-95
• /
• 2024

Recent studies explore a wide array of desalination and water treatment methods, encompassing membrane processes such as reverse osmosis (RO), nanofiltration (NF), and electrodialysis (ED) to advanced capacitive deionization (CDI) and its membrane variant (MCDI). Comparative analyses reveal ED's cost-effectiveness in low-salinity scenarios, while hybrid systems (NF-MCDI, RO-NF-MCDI) show improved salt removal and energy efficiency. Novel ion separation methods (NF-CDI, NF-FCDI) offer enhanced efficacy and energy savings. These studies also highlight the efficiency of these methods in treating complex wastewater specific to various industries. Environmental impact assessments emphasize the need for sustainability in system selection. Additionally, the integration of microfabricated sensors into membranes allows real-time monitoring, advancing technology development. These studies underscore the variety and promise of emerging desalination and water treatment technologies. They provide valuable insights for enhancing efficiency, minimizing energy usage, tackling industry-specific issues, and innovating to surpass conventional method limitations. The future of sustainable water treatment appears bright, with continual advancements focused on improving efficiency, minimizing environmental impact, and ensuring adaptability across diverse applications.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.5 no.4
• /
• pp.339-350
• /
• 2007

Status on the spent nuclear fuel management policy and R&D plan of the major countries is surveyed. Also the prospect of the future R&D plan is suggested. Recently so-called fuel cycle nations, which have the reprocess policy of the spent fuel, announced new spent fuel management policy based on the advanced fuel cycle technology. The policy is focused to transmute highly radioactive material and material having a very long half-life, and to recycle the Pu and U contained in the spent fuel. In this way the radio-foxily of the spent fuel as well as the amount of the high level waste to be eventually disposed can greatly be reduced. Most of countries selected the wet process as a primary option for the treatment of the spent fuel since the advanced wet process, which is based on the existing PUREX process, looks more feasible as compared with the dry process. The wet process, however, is much more sensitive in terms of proliferation-resistance compared with the dry process. The pure Pu can easily be obtained by simply modifying the process. On the other hand the pure Pu can not be extracted in the dry process based on the high temperature molten salt process such as a pyroprocess. Even though the pyroprocess technology is very premature, it has a great merit. Thus it is necessary for Korea to have a long term strategy for pursuing a spent fuel treatment technology with a proliferation resistance and a great merit for the GEN-IV fuel cycles. Pyroprocess is one of the best candidates to satisfy these purposes.

• KSBB Journal
• /
• v.7 no.4
• /
• pp.296-301
• /
• 1992

A Pseudomonas fluorescens was selected from mushrooms and studied in both batch and fed-batch cultures in order to get maximal biomass concentration. P. fluorescens is an aerobic bacterium and antagonistic to Pseudomonas tolaasii which causes blotch disease on the mushroom cap. P fluarescens and P. tolaasii were identified by Gram staining, gelatin liquefaction, oxidase test, etc. and were characterized by pigment production, temperature sensitivity, salt tolerance and rapid pitting test, etc., Celts of P. fluorescens well in medium containing 30g/L of glucose, whereas the growth was inhibited at the glucose levels at higher than 30g/L. The highest values of specific growth rate and productivity were obtained when using 10g/1 of yeast extract. Optimum concentrations of $NH_4Cl$ and ${(NH_4Cl)}_2SO_4$ for culture were found to be 1.0g/L and 0.1g/L respectively. Optimum concentration of $MgSO_4{\cdot}7H_2O$ used as a sulfursource was 1.0g/L. It was also found that the cell concentrations reached the maximum level when grown on the medium containing 1.0g/L of $KH_2PO_4$ and 0.1g/L of $CaCl_2$. Also, the optimum culture conditions were $30^{\circ}C$ and pH 6.0. Cultivation of P. fluarescens at high dissolved oxygen (DO) concentration led to a decrease of bacterial productivity in batch culture. Maximum productivity was achieved at 40% DO concentration.

• Journal of the Korea Concrete Institute
• /
• v.17 no.1 s.85
• /
• pp.19-25
• /
• 2005

Recycling of waste materials in the construction Industry is a useful method that can cope with an environment restriction of every country. In this study, synthetic lightweight aggregates are manufactured with recycled plastic and fly ash with 12 percent carbon. Nominal maximum-size aggregates of 9.5 mm were produced with fly ash contents of 0, 35, and $80\%$ by the total mass of the aggregate. An expanded clay lightweight aggregate and a normal-weight aggregate were used as comparison. Gradation, density, and absorption capacity are reported for the aggregates. Five batches of concrete were made with the different coarse aggregate types. Mechanical properties of the concrete were determined including density, compressive strength, elastic modulus, splitting tensile strength, fracture toughness, and fracture energy. Salt-scaling resistance, a concrete durability property, was also examined. Compressive and tensile strengths were lower for the synthetic aggregates; however, comparable fracture properties were obtained. Relatively low compressive modulus of elasticity was found for concretes with the synthetic lightweight aggregate, although high ductility was also obtained. As nv ash content of the synthetic lightweight aggregate increased, all properties of the concrete were improved. Excellent salt-scaling resistance was obtained with the synthetic lightweight aggregate containing 80 percent fly ash.

• Journal of the Korean Ceramic Society
• /
• v.42 no.4
• /
• pp.292-297
• /
• 2005

$LiMO_{2}(M=Co,Ni)$ samples were synthesized with $Li_{2}CO_{3},\;Co_{3}O_{4}$, and NiO by the solid-state reaction method. In the case of $LiCoO_{2}$, at low temperature$(T=400^{\circ}C)$ spinel structure was synthesized and the obtained spinel phase was transformed to layered phase at high temperature$(T\ge600^{\circ}C)$. The phase transition behaviors of $LiCoO_{2}$ were investigated with various heating temperature and time. The rate of transition was directly proportional to the concentrations of reactant, and activation energy of reaction was around 6.76 kcal/mol. When CoO(rock salt structure) was used as a starting material instead of $Co_{3}O_{4}$(spinel structure), layered structure of $LiCoO_{2}$ was obtained at low temperature. In the case of $LiNiO_{2}$ the transition from layered structure to rock salt structure occurred easily by disordering/ordering reaction, but did not occur in $LiCoO_{2}$. The difference in metal ion radii in $LiCoO_{2}$ and $LiNiO_{2}$ results in different behaviors of phase transitions.

• Journal of Environmental Impact Assessment
• /
• v.27 no.5
• /
• pp.431-446
• /
• 2018

In this study, chemical characteristics of $PM_{2.5}$ samples collected in an agricultural area in Nonsan of Korea were investigated focusing on of black carbon, 3 inorganic ions and 22 trace elements. It was found that the relative error and relative standard deviation of many trace elements fell below 10%, which indicates good analytical accuracy and precision. The mean values of $PM_{2.5}$ in an agricultural area were exceeded by new Korean air quality standard of March 2018. The concentration of $PM_{2.5}$ was well correlated with those of black carbon and ions. The concentrations of trace elements were in a wide range of seven orders of a magnitude. Based on these $PM_{2.5}$ data sets, a total of 6 sources were identified using PMF (Positive Matrix Factorization; secondary aerosol (34.4%), soil/road dust (20.1%), biomass burning (16.9%), incineration/fuel combustion (13.2%), vehicle exhaust(12.2%), sea-salt (3.17%). Results of our study indicate that it is very important to control illegal burning activities in agricultural area.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.13 no.1
• /
• pp.11-19
• /
• 2015

The production of nuclear fuel cladding tube is expected to increase with the nuclear power plant expansion. Zirconium(Zr) scrap that is generated during manufacturing is also expected to increase. Zr electrorefining experiment was carried out in the fluoride salt of LiF-KF-ZrF₄ using multiple electrode for scale up and improving throughput Zr electrorefiner develop-ment. The Zr reduction peak observed at-0.8 V(vs.Ni). Polarization behavior showed that the amount of applied current increases because of decreasing cell resistance as the number of cathode increases. Experimental results showed the highest recovery rate about 98% at lowest current density of 25.64 mA/cm² using 6 electrodes. XRD and TG analysis result show that pure Zr was recovered 99.92% and ICP analysis shows that lower impurity content than conventional impurity content of the Anode(97.8%). Electrorefining consumes energy about 7.15 kWh/kg less than 39.7% compared to the Kroll process using 6 electrode width of 20 mm and height of 65 mm. Because of increasing cell efficiency and recovery rate, using multiple cathode is determined as an efficient technique for scale up electrorefining Zr scrap.