• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.7
• /
• pp.998-1001
• /
• 2002

Saltwort (Salicornia herbacea L.), a kind of halophytes in Japan, is under investigation as a feed source for livestock as well as potential oilseed crop in salt marshes and salt fields. The present experiment was undertaken to analyze the nutritive value of saltwort as feed for ruminants. To determine the apparent digestibility and nutritive value of saltwort, five Japanese native goats were fed the diets consisting of alfalfa hay cubes with 15 or 20% (n=3 and n=2, respectively) inclusion levels of saltwort in the total diet on a DM basis. All the animals were randomly offered alfalfa hay cubes as a base diet or a mixed diet of alfalfa hay cubes and saltwort at maintenance level, thereafter, alternative feed (a base or mixed diet) was offered to the experimental animals (the incomplete crossover design). Analysis of the chemical composition of saltwort showed that the plant contained high levels of total ash (40.2% DM), sodium (12.7% DM) and chlorine (19.7% DM), and relatively high levels of CP (11.7% DM) and NDF (40.4% DM). Contents of TDN and digestible CP (DCP), DE and ME of saltwort were 33.5% DM, 8.4% DM, 7.4MJ/DM kg and 5.0MJ/DM kg, respectively. These results indicate that saltwort is rich in DCP and minerals (mainly sodium chloride), but poor in energy, suggesting that saltwort could be used as a mineral or CP supplement for ruminants raised around salinized areas in which high quality feed may not be available.

• 한국해양학회지
• /
• v.30 no.4
• /
• pp.262-270
• /
• 1995

A comparative study to understand the changes in physical and sedimentological natures was carried out in the Keum Estuary before and after the gate-close of Keum River weir. After closing of weir-gate maximum tidal current speed decreased about 30∼40% compared with that of the previous gate-opening period. Water masses also represent vertical stratifications both on water salinity and water transparency. The Keum Estuary seems to be changed from the well-mixed type estuary during the gate-opening period to the "partially-mixed type" and/or "salt-wedge type" estuary after the closing of weir-gate. The concentrations of suspended matter range 10∼100 mg/l in surface waters after the gate-close of Keum River Weir, representing about 1/4 to 1/3 decrease than those during the gate-close of Keum River Weir, representing about 1/4 to 1/3 decrease than those during the gate0opening period. Such decrease of suspended mater appears to be due to the decrease in the resuspension of bottom sediments, and also due to the vertical stratification of water masses that prevented the upward diffusion of turbid bottom waters. It is, therefore, expected that the depositional environment of Keum Estuary has been changing into the low energy conditions after the closing of weir gate, resulting in the rapid deposition of fine suspended matters within the Keum Estuary.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.1 no.1
• /
• pp.47-53
• /
• 2003

An electrochemical reduction technology which can reduce the decay heat, volume, and radioactivity of spent fuel by a factor of quarter through converting oxide type spent fuel to a metallic form in a molten salt was developed and tests in a scale of g (3- 40g $U_{3}O_{8}$ batch) have been carried out by Korea Atomic Energy Research Institute. In this research, the reaction apparatus in a scale of 5kg $U_{3}O_{8}$ batch was designed and manufactured for the mock-up test to obtain design data of the apparatus which will be used for the hot test in a scale of 20kg $U_{3}O_{8}$ batch. The electrochemical reduction behavior of $U_{3}O_{8}$ was analyzed regarding the operational factors and fresh $U_{3}O_{8}$ powder was metallized with a more than 99% yield verifying the process validity of electrochemical reduction process in a kg scale.

• Applied Chemistry for Engineering
• /
• v.8 no.6
• /
• pp.934-938
• /
• 1997

Acrylic acid was grafted onto the peroxidized cellulose which was stored at room temperature for 20 days after ${\gamma}$-ray irradiation in air. The effect of acids and metallic salts on the grafting yields was determined. The addition of both the acid and metallic salt was found to accelerate the grafting yield much more than the only metallic salt, and the addition of $FeSO_4{\cdot}7H_2O$ led to much higher grafting yield than that of $CuSO_4{\cdot}5H_2O$. The effect of acid on the grafting yield increased by the order $H_2>SO_4>HCl>HNO_3>CH_3COOH$. With the addition of $H_2SO_4$, the grafting yield rapidly increased up to $7{\times}10^{-2}$M, and then levelled off.

• Applied Chemistry for Engineering
• /
• v.25 no.6
• /
• pp.607-612
• /
• 2014

The physical properties of mercaptoundecanoic-acid layer formed on gold surfaces, which may affect the distribution of either gold particles adsorbed to the zirconium dioxide surface or vice versa, were investigated. To conduct this investigation, the surface forces were measured between the surfaces with respect to the salt concentration and pH value using atomic force microscope (AFM). The forces were quantitatively converted by the Derjaguin-Landau-Verwey-Overbeek (DLVO) theory to the surface potential and charge density of surfaces. The converted-value dependence on the salt concentration and pH was described with the law of mass action, and the dependence was consistent with the theoretical prediction. It was found that the mercaptoundecanoic-acid layer had higher values for the surface charge densities and potentials than the $ZrO_2$ surfaces, which may be attributed to the ionized-functional-groups of the mercaptoundecanoic-acid layer.

• Korean Journal of Materials Research
• /
• v.27 no.7
• /
• pp.381-385
• /
• 2017

In order to replace 14K white gold alloys, the properties of 5K white gold alloys (Au20-Ag80) were investigated by changing the contents of In (0.0-10.0 wt%). Energy dispersive X-ray spectroscopy (EDS) was used to determine the precise content of alloys. Properties of the alloys such as hardness, melting point, color difference, and corrosion resistance were determined using Vickers Hardness test, TGA-DTA, UV-VIS-NIR-colorimetry, and salt-spray tests, respectively. Wetting angle analysis was performed to determine the wettability of the alloys on plaster. The results of the EDS analysis confirmed that the Au-Ag-In alloys had been fabricated with the intended composition. The results of the Vickers hardness test revealed that each Au-Ag-In alloy had higher mechanical hardness than that of 14K white gold. TGA-DTA analysis showed that the melting point decreased with an increase in the In content. In particular, the alloy containing 10.0 wt% In showed a lower melting temperature (> $70^{\circ}C$) than the other alloys, which implied that alloys containing 10.0 wt% In can be used as soldering materials for Au-Ag-In alloys. Color difference analysis also revealed that all the Au-Ag-In alloys showed a color difference of less than 6.51 with respect to 14K white gold, which implied a white metallic color. A 72-h salt-spray test confirmed that the Au-AgIn alloys showed better corrosion resistance than 14K white gold alloys. All Au-Ag-In alloys showed wetting angle similar to that of 14K white gold alloys. It was observed that the 10.0 wt% In alloy had a very small wetting angle, further confirming it as a good soldering material for white metals. Our results show that white 5K Au-Ag-In alloys with appropriate properties might be successful substitutes for 14K white gold alloys.

• Polymer(Korea)
• /
• v.25 no.4
• /
• pp.451-459
• /
• 2001

Fabric ion-exchanger, aminated PP-g-styrene was synthesized with styrene monomer onto PP staple fiber by pre-irradiational grafting with E-beam and subsequent chloromethylation and amination. Degree of grafting was increased with increasing the styrene monomer concentration and the highest degree of grafting was obtained 118% at a monomer concentration of 80% styrene. Optimum condition of Mohr's salt and sulphuric acid were 1.0 ${\times}\;10^{-3}$ M and 0.1 M. Amount of amination was increased with increasing degree of grafting. Swelling ratio of aminated PP-g styrene was higher than that of trunk polymer. Ion-exchange capacity was 6.7 meq/g, which was three times greater than commercial ion-exchanger. Optimum condition of baron ion adsorption was pH 4 and amount of adsorption were increased with increasing the amount of amination.

• Polymer(Korea)
• /
• v.31 no.5
• /
• pp.374-378
• /
• 2007

Water-soluble terpolymer of acrylamide, diacetone acrylamide, and acrylic acid was prepared by redox initiators in aqueous medium. One component photoresist was synthesized by reaction of terpolymer with 4-azidoaniline. By blending the aqueous acrylamide/diacetone acrylamide copolymer solution with bisazide, 4,4'-diazidostilbene -2,2'-disulfuric acid sodium salt, two component photoresist was prepared. The photosensitivity per azido group unit mole of one component photoresist was 4 times higher than that of two component photoresist. The dot-type pattern was successfully achieved with one component photoresist at low exposure energy, which is prospective to be used as black matrix negative photoresist.

• Journal of Powder Materials
• /
• v.20 no.3
• /
• pp.197-202
• /
• 2013

A novel route to prepare Nd-Fe-B magnetic particles by utilizing both spray drying and reduction/diffusion processes was investigated in this study. Precursors were prepared by spray drying method using the aqueous solutions containing Nd salt, Fe salt and boric acid with stoichiometric ratios. Precursor particles could be obtained with various sizes from 2 to $10{\mu}m$ by controlling concentrations of the solutions and the average size of $2{\mu}m$ of precursors were selected for further steps. After heat treatment of precursors in air, Nd and Fe oxides were formed through desalting procedure, followed by reduction processes in Hydrogen ($H_2$) atmosphere and with Calcium (Ca) granules in Argon (Ar) successively. Moreover, diffusion between Nd and Fe occurred during Ca reduction and $Nd_2Fe_{14}B$ particles were formed. With Ca amount added to particles after $H_2$ reduction, intrinsic coercivity was changed from 1 to 10 kOe. In order to remove and leach CaO and residual Ca, de-ionized water and dilute acid were used. Acidic solutions were more effective to eliminate impurities, but Fe and Nd were dissolved out from the particles. Finally, $Nd_2Fe_{14}B$ magnetic particles were synthesized after washing in de-ionized water with a mean size of $2{\mu}m$ and their maximum energy product showed 9.23 MGOe.

• Membrane and Water Treatment
• /
• v.3 no.1
• /
• pp.25-34
• /
• 2012

Carboxylated polysulfone (CPS), poly (1,4-phenylene ether ethersulfone) (PPEES), membranes were prepared and used for the separation of NaCl and $CaCl_2$, in efficient way with less energy consumption. In this work, nanofiltration and reverse osmosis membranes were employed to the salt rejection behavior of the different salt solutions. The influence of applied pressure (1-12 bar), on the membrane performance was assessed. In CM series of membranes, $CM_1$ showed maximum of 97% water uptake and 36% water swelling, whereas, $CM_4$ showed 75% water uptake and 28% water swelling. In RCM series, $RCM_1$ showed 85% water uptake and 32% water swelling whereas, in $RCM_4$ it was 68% for water uptake and 20% for water swelling. Conclusively reverse osmosis membranes gave better rejection whereas nanofiltration membrane showed enhanced flux. CM1 showed 58% of rejection with 12 L/($m^2$ h) flux and $RCM_1$ showed 55% of rejection with 15 L/($m^2$ h) flux for 0.1 wt.% NaCl solution. Whereas, in 0.1 wt.% $CaCl_2$ solution, membrane $CM_1$ showed 78% of rejection with 12 L/($m^2$ h) flux and $RCM_1$ showed 63% rejection with flux of 9 L/($m^2$ h).