• 한국화재소방학회논문지
• /
• 제34권2호
• /
• pp.22-29
• /
• 2020

본 연구에서는 개발 중인 현장지휘관 훈련 콘텐츠에 적용될 화재상황의 현실성 및 전문성 확보를 위하여 선행연구에서 선정한 7개 화재유형별 중 주거목적시설의 대표 가연물 화재실험을 통해 화재양상 및 열방출량, 연기발생량을 분석하였다. 측정결과 최대 열방출량은 소파가 728.6 kW로 가장 높게 측정되었으며, 다음으로는 매트리스+전기장판, 책상+의자, TV, 매트리스 순으로 나타났다. 총열방출량의 경우 소파가 226.2 MJ, 총 연기발생량은 경우 매트리스+전기장판이 2,259.5 ㎡로 가장 많이 발생하였다. 본 연구에서는 가연물의 화재양상 및 특성에 주안점을 두고 시험수행을 하였다는 한계점이 있으며, 추후 다양한 데이터 확보와 FDS를 활용한 시뮬레이션 평가가 이루어져야 할 것으로 판단된다.

• KEPCO Journal on Electric Power and Energy
• /
• 제2권3호
• /
• pp.437-445
• /
• 2016

This paper discussed the effect of ammonia concentration adsorbed on fly ash for the ammonia emission as AAFA (Ammonia Adsorbed Fly Ash) produced from coal fired plants due to operation of NOx reduction technologies was landfilled with distilled or sea water at closed and open systems, respectively. Ammonia bisulfate and sulfates adsorbed on fly ash is highly water soluble. The pH of ammonium bisulfate and sulfate solution had significant effect on ammonia odor emission. The effect of temperature on ammonia odor emission from mixture was less than pH, the rate of ammonia emission increased with increased temperature when the pH conditions were kept at constant. Since AAFA increases the pH of solution substantially, $NH_3$ in the ash can release the ammonia order unless it is present at low concentration. $NH_4{^+}$ ion is unstable in fly ash and water mixtures of high pH at open system, which is changed to nitrite or nitrate and then released as ammonia gas. The proper conditions for < 20 ppm of ammonia concentration released from the AAFAs landfilled in ash pond were explored using an open system with sea water. It was therefore proposed that optimal operation to collect AAFA of less than 168 ppm ammonia at the electrostatic precipitator were controlled to ammonia slip with less than 5 ppm at SCR/SNCR installations, and, ammonia odor released from mixture of fly ash of 168 ppm ammonia with sea water under open system has about 20 ppm.

• 한국화재소방학회논문지
• /
• 제26권5호
• /
• pp.79-84
• /
• 2012

상층 및 인접건물로의 연소확대 위험성이 있는 옥외 광고물 소재의 연소특성을 평가하였다. 본 연구에서는 UL 94와 ASTM D 2863에 따라 난연성과 한계산소지수를 평가하였다. 난연성 평가결과, 포멕스가 V-0의 높은 난연성을 보이는 반면 다른 시료들에서는 등급외의 난연성을 보였다. 한계산소지수 평가 결과에서도 포멕스의 한계산소지수가 가장 높았다. ISO 5660-1에 따라 콘칼로리미터를 이용하여 연소특성을 평가하였으며, 콘칼로리미터 시험결과 옥외 광고물 소재들은 화재확대 예방에 취약하다는 것을 알 수 있었다. 플렉스의 착화시간이 가장 빨랐으며, 특히 아크릴판은 최대 열방출율 뿐만 아니라 총 방출열량 또한 다른 소재들에 비해 높았다.

• Journal of Industrial and Engineering Chemistry
• /
• 제67권
• /
• pp.301-311
• /
• 2018

In this study, the ion-gelation method was applied to fabricate novel Fe-carbon-bentonite-alginate beads ($Fe^0$/C-BABs). $Fe^0$/C-BABs could effectively control Fe release during persulfate (PS) activation in N-acetyl-p-aminophenol (APAP) oxidation. A novel two-stage approach that combined $Fe^0$/C-BABs and an oyster-shell-filled bed (OSFB) column was developed to address the low pH and high Fe concentration of the effluent of the traditional PS process. The application of the $Fe^0$/C-BABs and OSFB column regulated pH levels and Fe release during the advanced oxidation of APAP. The characteristics of $Fe^0$/C-BABs were also investigated through scanning electron microscopy, energy dispersive spectrometry, and Fourier transform infrared spectroscopy. The long-term operation performance of $Fe^0$/C-BABs in a continuous fixed-bed reactor under simultaneous PS and APAP feeding was also evaluated. The effects of initial PS concentration, pH, fixed-bed weight, in-flow rate, and dissolved oxygen (DO) were investigated. Under selected conditions, 86.3% efficiency was achieved during the first stage of APAP degradation (effluent pH of 3.05, Fe contents: $106.25mgL^{-1}$). Water quality improved after the effluent was passed through the OSFB column (effluent pH of 6.32, Fe contents: $21.43mgL^{-1}$). Moreover, this study analyzed the free radicals and intermediates produced during APAP degradation to identify the possible routes of APAP degradation.

• International Journal of Oral Biology
• /
• 제48권1호
• /
• pp.1-7
• /
• 2023

Oral squamous cell carcinoma (OSCC), which accounts for approximately 90% of oral cancers, has a high rate of local recurrence and a poor prognosis despite improvements in treatment. Exosomes released from OSCC cells promote cell proliferation and metastasis. Although it is clear that the biogenesis of exosomes is mediated by the endosomal sorting complex required for transport (ESCRT) machinery, the gene expression pattern of ESCRT, depending on the cell type, remains elusive. The exosomal release from the human OSCC cell lines, HSC-3 and HSC-4, and their corresponding gefitinib-resistant sub-cell lines, HSC-3/GR and HSC-4/GR, was assessed by western blot and flow cytometry. The levels of ESCRT machinery proteins, including Hrs, Tsg101, and Alix, and whole-cell ubiquitination were evaluated by western blot. We observed that the basal level of exosomal release was higher in HSC-3/GR and HSC-4/GR cells than in HSC-3 and HSC-4 cells, respectively. Long-term gefitinib exposure of each cell line and its corresponding gefitinib-resistant sub-cell line differentially induced the expression of the ESCRT machinery. Furthermore, whole-cell ubiquitination and autophagic flux were shown to be increased in gefitinib-treated HSC-3 and HSC-4 cells. Our data indicate that the expression patterns of the ESCRT machinery genes are differentially regulated by the characteristics of cells, such as intracellular energy metabolism. Therefore, the expression patterns of the ESCRT machinery should be considered as a key factor to improve the treatment strategy for OSCC.

• 대한기계학회논문집A
• /
• 제34권12호
• /
• pp.1849-1856
• /
• 2010

유리/레진/유리의 샌드위치 구조는 자동차, 바이오, 디스플레이 산업 등에서 이미 상용화되고 있는 구조이다. 이러한 유리/레진/유리의 샌드위치 구조는 최근 반도체, MEMS분야 등에서 대량생산기술로 관심을 일으키고 있는 임프린트 리소그래피 공정에서도 다루어지고 있다. 나노 임프린트 공정 기술은 몰드의 마이크로, 나노패턴을 기판에 반복적으로 전사함으로써 반도체 제조공정에서 5나노미터(nm) 이하의 선폭까지 구현할 수 있는 기술이다. 이 과정에서 사용되는 레진은 패터닝된 몰드에 의해 변형되고 UV(Ultraviolet rays)에 의해 경화되어 패턴의 전사과정을 거친다. 이 때 몰드와 기판의 이형거동은 나노 단위의 정밀한 정렬과 공정의 생산성과 직결된다. 따라서 본 연구에 서는 4점 굽힘 실험을 통해 유리/레진/유리 구조의 굽힘 강도를 측정하였고, 특히 이 과정에서 계면해방률을 도출함으로써 나노 임프린트 공정 시 몰드와 레진 층의 이형거동을 기계적 측면에서 고찰하였다.

• 전산구조공학
• /
• 제9권1호
• /
• pp.65-76
• /
• 1996

콘크리트의 미세공극 혹은 미세균열의 발생과 성장은 콘크리트의 점차적인 물성 저하를 야기한다. 이와같은 손상은 이방성을 가지며 소성과 함께 콘크리트의 비선형거동을 일으키는 주요원인이 된다. 본 논문은 콘크리트의 탄소성 변형 및 손상을 고려하여 콘크리트의 이방성 손상거동을 해석할 수 있는 콘크리트 연속체 손상모델의 개발에 관한 연구이다. 등가 탄성 에너지원리를 이용하여 이방 손상텐서로 표현된 유효탄성텐서를 구하고, 이를 포함하고 있는 열역학 법칙의 자유에너지함수와 소산포텐셜로부터 손상의 전개법칙을 유도한 후, 손상에너지해방률의 함수로 표현한 손상면을 적용하므로써 콘크리트의 이상성손상을 효율적으로 해석 할 수 있는 구성방정식을 유도하였다. 또한 이방성 손상모델에 콘크리트의 소성모델을 도입시켜 탄소성 변형 및 손상을 함께 고려할 수 있는 콘크리트의 연속체 손상모델을 개발하였다. 개발된 손상모델을 유한요소해석 프로그램에 적용하여 1축 및 2축의 여러 조합응력을 받는 콘크리트 모형을 유한요소해석하였으며, 실험결과 또는 타 모델과의 비교로부터 손상모델의 타당성을 검증하였다.

• 한국수소및신에너지학회논문집
• /
• 제26권2호
• /
• pp.164-169
• /
• 2015

Recent research has focused on alternative fuel to improve engine performance and to comply with emission regulation. Finding an alternative fuel and reducing environment pollution are the main goals for future internal combustion engines. The purpose of this study is to obtain low-emission and high-efficiency by hydrogen enriched CNG fuel in SI engine and is to clarify the effects of hydrogen enrichment in CNG fuelled engine on exhaust emission and performance. An experimental study was carried out to obtain fundamental data for performance and emission characteristics of hydrogen enrichment in SI engine. The experiment was conducted at 2500 rpm, bmep 2 bar, 4 bar conditions while CNG fuel was mixed with 10, 20 and 30% hydrogen blends. From the experimental results, combustion duration was shortened due to rapid flame propagation velocity of hydrogen and these were attributed to the burning velocity increasing exponentially with increasing hydrogen blending ratio. Hydrogen has much wider flammable limit than methane, gasoline and the minimum ignition energy is about an order of magnitude lower than for other combustion. By adding hydrogen, $CO_2$ and HC were reduced. However, $NO_X$ was increased dut to high rate of heat release for hydrogen substitutions.

• Composites Research
• /
• 제26권3호
• /
• pp.189-194
• /
• 2013

본 연구에서는 단방향, 직교방향, 임의의 방향 총 세 방향성을 가진 아마섬유에 첨가형 난연제로 널리 쓰이는 나노클레이를 분사한 뒤, 이 섬유를 복합재료의 제조에 사용하였다. 나노클레이는 분산성이 다른 세가지 분사방법을 사용하였으며, 제조에 사용한 기지재는 열가소성 수지인 폴리프로필렌과 열경화성 수지인 에폭시이다. 다구찌 실험계획법을 이용해서 실험을 단순화 하였으며, 실험결과 인장강도, 탄성계수, 총 충격흡수에너지, 열 방출율에 대한 최적의 복합재료 제조 조건을 얻을 수 있었다.

• KCI Concrete Journal
• /
• 제12권1호
• /
• pp.57-68
• /
• 2000

The effect of structure size on the nominal strength of unidirectional fiber-polymer composites, failing by propagation of a kink band with fiber microbuckling, is analyzed experimentally and theoretically. Tests of novel geometrically similar carbon-PEEK specimens, with notches slanted so as to lead to a pure kink band (without shear or splitting cracks), are conducted. The specimens are rectangular strips of widths 15.875, 31.75. and 63.5 mm (0.625, 1.25 and 2.5 in and gage lengths 39.7, 79.375 and 158.75 mm (1.563, 3.125 and 6.25 in.). They reveal the existence of a strong (deterministic. non-statistical) size effect. The doubly logarithmic plot of the nominal strength (load divided by size and thickness) versus the characteristic size agrees with the approximate size effect law proposed for quasibrittle failures in 1983 by Bazant This law represents a gradual transition from a horizontal asymptote, representing the case of no size effect (characteristic of plasticity or strength criteria), to an asymptote of slope -1/2 (characteristic of linear elastic fracture mechanics. LEFM) . The size effect law for notched specimens permits easy identification of the fracture energy of the kink bandand the length of the fracture process zone at the front of the band solely from the measurements of maximum loads. Optimum fits of the test results by the size effect law are obtained, and the size effect law parameters are then used to identify the material fracture characteristics, Particularly the fracture energy and the effective length of the fracture process zone. The results suggest that composite size effect must be considered in strengthening existing concrete structural members such as bridge columns and beams using a composite retrofitting technique.