• Advances in Energy Research
• /
• v.3 no.3
• /
• pp.181-194
• /
• 2015

In this work, an experimental study of the gasification on wood was carried out in downdraft type fixed bed Gasifier attached with 10 kW duel fuel diesel engine. The main objective of the study was to use wood as the biomass fuel for downdraft Gasifier and to evaluate the operating parameter of gasifier unit to predict its performance in terms of gas yield and cold gas efficiency. The influence of different biomass on fuel consumption rate, gas yield and cold gas efficiency was studied. Composition of producer gas was also detected for measuring the lower heating value of producer gas to select the feed stock so that optimum performance in the existing gasifier unit can be achieved. Under the experimental conditions, Lower heating value, of producer gas, cold gas efficiency and gas yields, using wood as a feed stock, are $4.85MJ/m^3$, 46.57% and $0.519m^3/kg$.

• 에너지협의회보
• /
• s.19
• /
• pp.10-15
• /
• 1991

• Journal of Energy Engineering
• /
• v.29 no.2
• /
• pp.40-60
• /
• 2020

When various kinds of products are produced from a single energy system, the methodology which allocates the common cost to each product cost is very important because it is directly related with the profit and loss of producer and purchaser. In the cost allocation methodology of electricity and heat for CHP, there are heat method, work method, benefit distribution method, exergy method, and so on. Benefit distribution method is the most widely known worldwide, and exergy method is widely recognized among thermal engineers. As a result of review, it is judged that the rationality of benefit distribution method is low because the result deviates from common sense, and the rationality of exergy method is high because the result consistent with common sense. In accounting, it is calculated as merit methodology and the result is used for negotiations between producer and buyer, but In thermal engineering, the rationality of exergy methodology is described only as a thesis. The purpose of this study is to compare and examine the rationality of merit methodology and exergy methodology, and the aim is to describe in detail in order that producer and buyer can understand the rationality of each methodology.

• Advances in Energy Research
• /
• v.4 no.3
• /
• pp.223-237
• /
• 2016

The excess use of conventional sources of energy by the industries and power sector result in acute shortage of energy produced by fossil fuel. To overcome this energy crisis, biomass feedstock is used to produce syngas or producer gas. For cleaning the dust particle present in the producer gas cyclone separators are largely used. In this paper we investigate the performance parameters of cyclone separator mainly efficiency and pressure drop for different feedstock. Cyclone performance has been evaluated based on experimentation and empirical approach using Leith and Licht model. The same has also been calculated by using turbulent RSM in Ansys Fluent for Wood and Coconut shell feedstock. Experimental results show that using feed stock with 10 % Calcium oxide (CaO) by weight, the efficiency of cyclone got reduced from 71.87% to 70.75% for wood feed stock, whereas in case of coconut shell, the cyclone efficiency got reduced from 78% to 73.44%. It is also seen that Leith and Licht model and Reynolds stress model (RMS) predicts very close to the particle collection efficiency evaluated by using experimental data.

• Advances in Energy Research
• /
• v.8 no.3
• /
• pp.175-184
• /
• 2022

The dual-fuel technology, which uses gaseous fuel as the main fuel and liquid as the pilot fuel, is an appealing technology for reducing the exhaust emissions. The current study proposes emission models based on ANFIS for a dual-fuel using producer gas (PG)-diesel engine. Emissions measurements were taken at different engine load levels and fuel injection timings. The proposed model predictions were examined using statistical methods. With R2 values in the range of 0.9903 to 0.9951, the established ANFIS model was found to be consistently robust in predicting emission characteristics. The mean absolute percentage deviate in range 1.9 to 4.6%, and mean squared error varies in range 0.0018 to 13.9%. The evaluation of the ANFIS model developed shows a reliable claim of intrinsic sensitivity, strength, and outstanding generalization. The presented meta-model can be used to simulate the engine's operation in order to create an efficient control tool.

• Environmental and Resource Economics Review
• /
• v.29 no.1
• /
• pp.91-111
• /
• 2020

While the renewable energy portfolio standard (RPS) is in place to expand the scale of renewable energy generation, the power producer can obtain the renewable energy credit (REC) and use it as an incentive to operate the facility. RECs secured by solar power generation can be traded through spot market or fixed price contracts, and, in the spot market trading, power producers are exposed to the uncertainty of REC spot price. In this study, real option analysis is conducted to analyze the optimal threshold of REC spot price for the conversion of REC trading method by power producer considering the uncertainty of REC spot price. We calculated the optimal threshold of REC spot price that can convert the trading method of REC from spot market to fixed price contract. In conclusion, the spot market trading is a rational trading method when considering the uncertainty of REC price, but the fixed price bidding is a rational trading method when not considering the uncertainty of REC price.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2008.05a
• /
• pp.415-418
• /
• 2008

This paper presents an innovative prototype of a new conceptual electromagnetic induction-based fluid beating appliance using voltage-fed type scries capacitor-compensated load resonant high-frequency IGBT inverter with a phase-shifted PWM and a power factor correction schemes. Its operating characteristics in steady-state are illustrated including unique features and evaluated on the basis of its computer simulation and experimental results of 10kw breadboard appliance for hot water producer and superheated steamer. The promising cost effective inverter-fed boiler appliances for electromagnetic induction-heated type fluid-heating in the pipeline systems are proposed for induction-heated boiler, super heat steamer, high temperature water producer, hot gas producer and metal catalyst heating for exhaust gas cleaning in engine, which are more suitable and acceptable for industrial, chemical, and consumer energy utilization for household and business from a practical point of view.

• Journal of Energy Engineering
• /
• v.24 no.4
• /
• pp.1-10
• /
• 2015

For successful operation of waterflooding which is one of secondary recovery methods, suitable water injection allocation is important to increase oil recovery. Well allocation factor(WAF) which is one way to quantify the injector and producer connectivity, is utilized to allocate water injection of waterflooding. Static WAF cannot represent the field condition and can induce incorrect value. To compensate for limitation of static WAF, modified WAF which includes several parameters that affect patterns including well radius, distance between wells, and injection rates is proposed. In this study, static and modified WAFs were applied to injection optimization of waterflooding and results by each WAF were compared. In case of modified WAFs, produced water were less and produced oil were more than case of static WAF especially in big change of distance between producer and injector. Therefore, modified WAFs can allocate water injection more efficiently than static WAF.

• Environmental Engineering Research
• /
• v.24 no.4
• /
• pp.591-599
• /
• 2019

To convert sewage sludge to energy, drying-gasification characteristics during microwave heating were studied. During the gasification of carbon dioxide, the main products were gas, followed by char, and tar in terms of the amount. The main components of the producer gas were carbon monoxide and hydrogen including a small amount of methane and light hydrocarbons. They showed a sufficient heating value as a fuel. The generated tar is gravimetric tar, which is total tar. As light tars, benzene (light aromatic tar) was a major light tar. Naphthalene, anthracene, and pyrene (light polycyclic aromatic hydrocarbon tars) were also generated, but in relatively small amounts. Ammonia and hydrogen cyanide (precursor for NO_x) were generated from thermal decomposition of tar containing protein and nitrogen in sewage sludge. In the case of sludge char, its average pore diameter was small, but specific area, pore volume, and adsorption amounts were relatively large, resulting in superior adsorption characteristics.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1364-1367
• /
• 2005

In this paper, a novel prototype topology of soft switching PWM controlled high frequency AC power conversion circuit without DC voltage smoothing chemical capacitor filter link from the voltage grid of utility frequency AC power supply source with 60Hz-100V or 60Hz-200V is proposed and introduced for innovative consumer induction heating(IH) boiler applications as hot water producer, steamer and super heated vapor steamer.