• Analytical Science and Technology
• /
• v.9 no.3
• /
• pp.279-291
• /
• 1996

The new chelating resins, XAD-2, 4, 16-TAC and XAD-2, 4, 16-TAO were synthesized by Amberlite XAD-2, XAD-4, and XAD-16 macroreticular resins with 2-(2-thiazolylazo)-p-cresol(TAC) and 4-(2-thiazolylazo)orcinol(TAO) as functional groups and were characterized by elemental analysis and FT-IR spectrometry. It was found that the content of functional group in chelating resin was 0.60mmol/g in XAD-16-TAC and 0.68mmol/g in XAD-16-TAO respectively. The chelating resins were stable in acidic and alkaline solution and can be reused over 10 times. The sorption behavior of some metalions to two chelating resins was investigated by batch method, which included batch equilibrium, effect of pH, coexisting ions and masking agent. For the optimum condition of sorption, the time required for equilibrium was about 1 hour and optimum pH was 5. In the presence of anions such as ${SO_4}^{2-}$ and $CH_3COO^-$, the sorption of U(VI) ion was slightly reduced but other anions such as $Cl^-$ and $NO{_3}^-$ revealed no interference effect. Also, sorption capacity of U(VI) ion was decreased by addition of $CO{_3}^{2-}$ ion because of complex formation of $[UO_2(CO_3)_3]^{4-}$, but alkali metals and alkali earth metals including Na(I), K(I), Mg(II), and Ca(II) were not affected for the sorption extent. Masking agent, NTA showed better separation efficiency of U(VI) ion from coexisting metal ions such as Th(IV), Zr(IV), Hf(IV), Cu(II), Cd(II), Pb(II), Ni(II), Zn(II) and Mn(II) than EDTA, CDTA.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.4 no.3
• /
• pp.194-200
• /
• 1984

Effects of seed coating on establishment, early growth and herbage production were investigated in Pot, Soil box and Field experiments. Seed was coated with 60% Lime, 20% Phosphate and 20% Peatmoss(W/W), also finely sprayed 13% Arabic gum and 2% Methyl cellulose(W/V). Coating were generally 1:20, seed: coat(W/W). 1. In the general growth of the growing stages and different oversown species at 80 days, seed coated was promoted than none in early growth. (Table 2 and 3) 2. Stand counts at 60 days after oversown, seed coated was higher 15% than none, especially, there was advantage due to coating on the medium and large size seeds such as Orchardgrass, Perennial ryegrass and Kentucky bluegrass, but did not assist establishment of the large (Tall fescue) and small (Ladino clover) size seed. 3. Variation of sward composition was not quite different between two treatments, but seed coated was slightly increased the Percentage of sown grasses with advance of cutting time. 4. Total dry metter yield per unit area with seed coated was higher 17% than none in establishment year. 5. Variations in the chemical composition of the herbage and soil were influenced by coating materials in the coating regime (Table 8). 6. From these facts, seed coated also appeared that adequate seedling stands, early growth and herbage production could be obtained with higher than conventional overseeding method under a poor conditions.

• Korean Journal of Biological Psychiatry
• /
• v.12 no.1
• /
• pp.42-61
• /
• 2005

Objectives:The ginsenoside Rg1 and Rb1, the major components of ginseng saponin, have neurotrophic and neuroprotective effects including promotion of neuronal survival and proliferation, facilitation of learning and memory, and protection from ischemic injury and apoptosis. In this study, to investigate the molecular basis of the effects of ginsenoside on neuron, we analyzed gene expression profiling of SH-SY5Y human neuroblastoma cells treated with ginsenoside Rg1 or Rb1. Methods:SH-SY5Y cells were cultured and treated in triplicate with ginsenoside Rg1 or Rb1($80{\mu}M$, $40{\mu}M$, $20{\mu}M$). The proliferation rates of SH-SY5Y cells were determined by MTT assay and microscopic examination. We used a high density cDNA microarray chip that contained 8K human genes to analyze the gene expression profiles in SH-SY5Y cells. We analyzed using the Significance Analysis of Microarray(SAM) method for identifying genes on a microarray with statistically significant changes in expression. Results:Treatment of SH-SY5Y cells with $80{\mu}M$ ginsenoside Rg1 or Rb1 for 36h showed maximal proliferation compared with other concentrations or control. The results of the microarray experiment yielded 96 genes were upregulated(${\geq}$3 fold) in Rg1 treated cells and 40 genes were up-regulated(${\geq}$2 fold) in Rb1 treated cells. Treatment with ginsenoside Rg1 for 36h induced the expression of some genes associated with protein biosynthesis, regulation of transcription or translation, cell proliferation and growth, neurogenesis and differentiation, regulation of cell cycle, energy transport and others. Genes associated with neurogenesis and neuronal differentiation such as SCG10 and MLP increased in ginsenoside Rg1 treated cells, but such changes did not occur in Rb1-group. Conclusion:Our data provide novel insights into the gene mechanisms involved in possible role for ginsenoside Rg1 or Rb1 in mediating neuronal proliferation or cell viability, which can elicit distinct patterns of gene expression in neuronal cell line. Ginsenoside Rg1 have more broad and strong effects than ginsenoside Rb1 in gene expression and related cellular physiology. In addition, we suggest that SCG10 gene, which is known to be expressed in neuronal differentiation during development and neuronal regeneration during adulthood, may have a role in enhancement of activity dependent synaptic plasticity or cytoskeletal regulation following treatment of ginsenoside Rg1. Further, ginsenoside Rg1 may have a possible role in regeneration of injured neuron, promotion of memory, and prevention from aging or neuronal degeneration.

• Tuberculosis and Respiratory Diseases
• /
• v.47 no.1
• /
• pp.90-96
• /
• 1999

Background : Osteoporosis has been reported in patients with chronic obstructive pulmonary disease, but this association is not well established. This study was undertaken to determine whether the prevalence of osteoporosis was increased in patients with chronic obstructive pulmonary disease and we examined the relationship of corticosteroid administration with osteoporosis. Method: Subjects were 23 patients with chronic obstructive pulmonary disease and 20 control patients. We reviewed hospital records and measured bone mineral density using dual-energy x-ray absorptiometry(Lunar. USA). Results: Mean bone mineral density(BMD) of spine in COPD group was $0.683{\pm}0.154 g/cm^2$ and $0.971{\pm}0.212g/cm^2$ in controls(p<0.01). But there was no significant difference in femoral neck BMD. There were seventeen cases of osteoporosis and six cases of osteopenia in COPD group and three patients of osteoporosis and one case of osteopenia in controls. But, there was no significant correlation between disease duration of COPD and spinal T score(r=-0.395, p>0.05). Ten patients were received corticosteroid in COPD group. Spinal T score in steroid receiving patients were $-3.82{\pm}0.94(SD)$ and $-2.82{\pm}0.97(SD)$ in not having steroid patients(p<0.01). Cumulative dose of corticosteroid was associated with spinal T score(r=-0.424, p<0.05) and duration of corticosteroid administration also associated with spinal T score(r=-0.457. p<0.05). Spinal BMD of patients not having corticosteroid in COPD group(n=13) were significantly lower than that of controls($0.71{\pm}0.13 g/cm^2$ and $0.97{\pm}0.21 g/cm^2$, p<0.01). Conclusion : Prevalence of osteoporosis is increased in patients with chronic obstructive pulmonary disease. Especially patients who are receiving corticosteroid have high risk of osteoporosis or osteopenia and need for preventive management.

• Journal of Nutrition and Health
• /
• v.48 no.1
• /
• pp.81-93
• /
• 2015

Purpose: The aim of this study was to estimate total sugar intake and sugar intake-related dietary habit and nutrient intake of elementary school students. Methods: Subjects included 701 elementary school students (351 boys and 350 girls) residing in Jeju. The research analyzed a sample and was carried out using the 24 hour recall method and one day consumption of total sugar. Results: The average daily total sugar intake was 55.3 g (male 53.1 g, female 57.6 g). Total sugar intake per meal was 6.3 g (11.4%) from breakfast, 6.9 g (12.5%) from lunch, and 7.2 g (13.0%) from dinner, 34.9 g (63.1%). Major food groups of total sugar were milks (17.04 g), grains and their products (12.79 g), fruits and their products (9.40 g), and sugars and sweets (7.30 g). In analysis of the amount of total sugar consumption from several recipes, much was taken in from dessert and snacks such as dairy products (15.08 g), bread and snacks (6.4 g), beverages (5.5 g), fruits (5.1 g), and ice cakes (4.8 g). Total sugar consumption was high for rices and side dishes such as noodles (5.1 g), stir-fried foods (2.3 g), fried foods (1.4 g), cooked rice with seasoning (1.4 g), and hard-boiled foods (1.1 g). In comparison of total sugar consumption for sugar sources, daily intake of natural sugar, added sugar, and natural and added sugar were 25.8 g, 23.3 g, and 6.2 g, respectively. High sugar intake group, which was over 20% of the energy from total sugar intakes, consumed significantly less Fe, Zn, and niacin than the low sugar intake group, which was below 20%. Conclusion: Total sugar intake of fifth graders of elementary schools on Jeju Island was 55.4 g/day, and it was usually intake from snacks. Therefore, elementary school students need nutritional education for proper selection of better snacks and for reduction of dietary sugar intake.

• Journal of Nutrition and Health
• /
• v.51 no.4
• /
• pp.330-339
• /
• 2018

Purpose: This study examined the dietary habits and nutritional status of young children in Korea. Methods: Data were collected from the 2013 ~ 2015 KNHNES (Korea National Health and Nutrition Examination Survey) by health behavior interviews and the 24-hour dietary recall method. This study included 1,214 (445 aged 1 ~ 2 years, 769 aged 3 ~ 5 years) young children aged 1 ~ 5 years. To analyze the dietary status of young children, the general characteristics of young children and their mothers, their dietary behaviors and health factors, and nutritional status and frequently consumed foods were analyzed. Results: The starting time of bovine milk and weaning were 14 ~ 15 months and 6.2 months, respectively. Eighty two percent of young children ate breakfast 5 ~ 7 times per week while only 2.3% of them skipped breakfast. The highest percentage (35.8%) of the frequency of eating-out was 5 ~ 6 times per week. The prevalence of asthma, atopy, and allergic rhinitis was significantly higher in young children 3 ~ 5 years old than in those 1 ~ 2 years old. The subjects with lower recommended energy intake were 44.1% and 57.4% of young children 1 ~ 2 years old and 3 ~ 5 years old, respectively. Most nutrients except calcium and potassium were taken enough. For the intakes of calcium and potassium, 51% and 64% of young children 1 ~ 2 years and 3 ~ 5 years old, respectively, were taking less than the recommended calcium intake, and 79.5% and 75.5% of young children 1 ~ 2 years and 3 ~ 5 years old, respectively, did not meet the recommended potassium intake. The frequently consumed foods of young children 1 ~ 2 years old were milk, white rice, apple, curd yogurt, and egg, and those of 3 ~ 5 years old children were milk, white rice, apple, egg, and mandarin. Conclusion: The results of this study can be used to provide basic data for the nutritional education of mothers and teachers and assist in the development of sustainable dietary programs for young children.

• Progress in Medical Physics
• /
• v.21 no.1
• /
• pp.86-92
• /
• 2010

The purpose of this study was to measure curvature contour skin dose using radiochromic film and TLD for a conventional open field. We also attempted to quantify the degradation of skin sparing associated with use of immobilization devices for high energy photon beams and to calculate the skin dose with a help of Monte Carlo (MC) simulation. To simulate head-and-neck and shoulder treatment, a cylindrical solid water phantom 11 cm in diameter was irradiated with 6 MV x-rays using $40{\times}40\;cm^2$ field at 100 cm source axis distance (SAD) to the center of the phantom. Aquaplastic mesh mask was placed on the surface of the cylindrical phantom that mimicked relevant clinical situations. The skin dose profile was obtained by taking measurements from $0^{\circ}$ to $360^{\circ}$ around the circumference of the cylindrical phantom. The skin doses obtained from radiochromic film were found to be 47% of the maximum dose of $D_{max}$ at the $0^{\circ}$ beam entry position and 61% at the $90^{\circ}$ oblique beam position without the mask. Using the mask (1.5 mm), the skin dose received was 59% at $0^{\circ}$ incidence and 78% at $80^{\circ}$ incidence. Skin dose results were also gathered using thin thermoluminescent dosimeters (TLD). With the mask, the skin dose was 66% at $0^{\circ}$ incidence and 80% at $80^{\circ}$ incidence. This method with the mask revealed the similar pattern as film measurement. For the treatments of the head-and-neck and shoulder regions in which immobilization mask was used, skin doses at around tangential angle were nearly the same as the prescription dose. When a sloping skin contour is encountered, skin doses may be abated using thinner and more perforated immoblization devices which should still maintain immoblization.

• Journal of Applied Biological Chemistry
• /
• v.60 no.1
• /
• pp.79-86
• /
• 2017

Microbes in forest are very important due to not only to enhance soil fertility but also maintain a healthy ecosystem by supplying the energy available to living organisms by producing various kinds of enzymes related to degradation of lignocellulosic biomass. In order to isolate a lignocellulosic biomass degrading bacterial strain from the Jurassic park located in Gyeongnam National University of Science and Technology, We used the Luria-Bertani-Carboxymethyl cellulose (CMC) agar trypan blue method containing 0.4 % carboxymethyl cellulose and 0.01 % trypan blue. As a result, we isolated a bacterial strain showing both activity on the CMC and xylan. To identify the isolated strain, 16S rRNA sequencing and API kit analysis were used. The isolated strain turned out to belong to Bacillus species and then named Bacillus sp. GJY. In the CMC zymogram analysis, it showed that one active band of about 28kDa in size is present. Xylan zymogram analysis also showed to have one active band of about 25kDa in size. The optimal growth temperature of Bacillus sp. GJY was $37^{\circ}C$. The maximal activities of CMCase and xylanase were 12 hour after incubation. The optimal pH and temperature for CMCase were 5.0 and $40^{\circ}C$, respectively, whereas the optimal pH and temperature for xylanase was 4.0 and $40^{\circ}C$. Both activities for CMCase and xylanase showed to be thermally stable at 40and $50^{\circ}C$, while both activities rapidly decreased at over $60^{\circ}C$.

• Journal of Dairy Science and Biotechnology
• /
• v.27 no.2
• /
• pp.55-62
• /
• 2009

Milk is called an almost complete food in terms of nutrition, especially for the younger generations because it contains a number of nutrients required for growth and development. Lactose intolerance is defined as a malabsorption of lactose in the intestine with some typical symptoms of abdominal pains and bloating, and occurred at 75% of global populations, which hampers milk consumption worldwide. Lacks of milk consumption in the underdeveloped countries frequently lead to many nutrients deficiencies, so that diseases including osteoporosis, hypertension, and colon cancer are more prevalent in the recent days. Lactose in foods needs to be hydrolyzed prior to intestinal absorption. The hydrolytic enzyme responsible for splitting lactose into its monomeric forms, glucose and galactose, is called as lactase or $\beta$-galactosidase. The former is primarily used as blood sugar and energy source and the latter used in glycolipid synthesis of brain tissues in infants. Lactose is clinically diagnosed with the breath hydrogen production test as well as intestinal biopsy. Reportedly, symptoms of lactose intolerance are widely prevalent at 25% of Europeans, 50 to 80% of Hispanics, South Indians, Africans, and Jews, almost 100% of Asians and native Americans. For the adults, phenotype of lactase persistence, which is able to hydrolyse lactose, is more common in the northern Europeans, but in the other area lactase non-persistence or adult-type hypolactasia is dominant. Genetic analysis on human lactase gene continued that lactase persistence was closely related to the err site of 1390 single nucleotide polymorphism from the 5'-end. To alleviate severity of lactose intolerance symptoms, some eating patterns including drinking milk a single cup or less, consumption along with other foods, whole milk rather than skimmed milk, and drink with live yogurt cultures, are highly recommended for the lactose maldigesters. Also, delay of gastric emptying is effective to avoid the symptoms from lactose intolerance. Frequency of lactose intolerance with conventional diagnosis is thought overestimated mainly because the subjects are exposed to too much lactose of 50 g rather than a single serving amount. Thus simple and accurate diagnostic method for lactose intolerance need to be established. It is thought that fermented milk products and low- or free lactose milks help improve currently stagnant milk consumption due to lactose intolerance which contributes to major barrier in milk marketing especially in Asian countries.

• Journal of Biomedical Engineering Research
• /
• v.25 no.4
• /
• pp.253-259
• /
• 2004

in this study, we developed a Monte Carlo imaging simulation code written by the visual C$\^$++/ programing language for design optimization of a digital X-ray imaging system. As a digital X-ray imaging system, we considered a Gd$_2$O$_2$S(Tb) scintillator and a photosensor array, and included a 2D parallel grid to simulate general test renditions. The interactions between X-ray beams and the system structure, the behavior of lights generated in the scintillator, and their collection in the photosensor array were simulated by using the Monte Carlo method. The scintillator thickness and the photosensor array pitch were assumed to 66$\mu\textrm{m}$ and 48$\mu\textrm{m}$, respertively, and the pixel format was set to 256 x 256. Using the code, we obtained X-ray images under various simulation conditions, and evaluated their image qualities through the calculations of SNR (signal-to-noise ratio), MTF (modulation transfer function), NPS (noise power spectrum), DQE (detective quantum efficiency). The image simulation code developed in this study can be applied effectively for a variety of digital X-ray imaging systems for their design optimization on various design parameters.