• Management & Information Systems Review
• /
• v.36 no.3
• /
• pp.185-202
• /
• 2017

This study suggests the estimation of the demand for the exhibition center in Busan and to valid reasons for the establishment of the 2nd Convention Center in Busan. The validity for the estimated demand is acquired by examining the studies conducted by the Ministry of Commerce Industry and Energy. The qualitative data for the phased establishment of the area is suggested in accordance to the results of the demand estimation. From previous study(Oh, 2017), Kangseo-gu, Busan has been evaluated to be the final candidate for building a new convention center in the city of Busan. The potential synergy effects of on-going developmental projects in Kangseo region is one of the influential factors for the MICE professionals' opinion in the qualitative analysis. Moreover, the region has available land to hold the facility of more than 100,000 square meter to overcome the current drawback of BEXCO, insufficient space to hold large events. Lastly, the expansion of Gimhae International Airport would bring an increased international flights that would also lead to an increase in MICE industry for the region. The virtual effect of the more than one million $m^2$-sized oconvention center is examined via Huff Model and the results suggests a logical estimated data for further demand needed for the south east regions, not just within the city of Busan.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.7
• /
• pp.417-427
• /
• 2016

This paper is the first investigation of the steady flow characteristics of an SI engine with a semi-wedge combustion chamber as a function of the port shape. For this purpose, the planar velocity profiles were measured at the 1.75B position by particle image velocimetry. The flow patterns were examined with both a straight and a helical port. Two swirls were observed up to 4 mm valve lift with the straight port and up to 2 mm with the helical one; however, only one swirl was present after these lifts. The flow characteristics changed suddenly between 4 and 5 mm lift in the straight port; on the other hand, the change with lift was gradual with the helical port - the transition points between flow regimes were different with the port shapes. In addition, the centers of the swirls were relatively far from the cylinder center so that the effect of eccentricity may not be negligible at 1.75B, regardless the shape. The eccentricity values with the straight port were especially high - over 0.5 for all lifts. Finally, real velocities were found to be much lower than those predicted by the assumption of ISM evaluation, with the profiles differing qualitatively as well.

• Journal of the Korean Vacuum Society
• /
• v.19 no.4
• /
• pp.249-255
• /
• 2010

Methods of the characteristics evaluation of turbo-molecular pumps (TMP) are well-defined in the international measurement standards such as ISO, PNEUROP, DIN, JIS, and AVS. The Vacuum Center in the Korea Research Institute of Standards and Science (KRISS) has recently designed, constructed, and established the integrated characteristics evaluation system of TMPs based on the international documents by continuously pursuing and acquiring the reliable international credibility through measurement perfection. The measurement of TMP pumping speed is normally performed with the throughput and orifice methods dependent on the mass flow regions. However, in the UHV range of the molecular flow region, the high uncertainties of the gauges, mass flow rates, and conductance are too critical to precisely accumulate reliable data. In order to solve the uncertainty problems of pumping speeds in the UHV range, we introduced a SRG with 1% accuracy and a constant volume flow meter (CVFM) to measure the finite mass flow rates down to $10^{-1}$ Pa-L/s with 3% uncertainty for the throughput method. In this way we have performed the measurement of pumping speed down to $10^{-4}$ Pa with an uncertainty of less than 6% for a 1000 L/s TMP. In this article we suggest that the CVFM has an ability to measure the conductance of the orifice experimentally with flowing the known mass through the orifice chambers, so that we may overcome the discontinuity problem encountering during introducing two measurement methods in one pumping speed evaluation sequence.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.4 s.95
• /
• pp.427-437
• /
• 2005

In this paper, the perceived audio level metering algorithm of digital audio sound to be able to operate in real-time is proposed. Through analyzing a conventional recommendation ITU-RBS1387-I for objective audio quality analysis, FFT-based loudness metering algorithm is implemented and the real-time method of that algorithm was advised and proved. The proposed method is based on look-up table. In order to prove the proved method, using 23 pure tones and 30 preselected digital audio samples, its performance and operation time is evaluated. Its performance, compared with an original algorithm's, have a good figure of less than $2\;\%$ error even if look-up table related with spectral spreading have large level resolution of $10\;\cal{dB}$. The proposed algorithm take only 1/21 of original algorithm's measuring time. Also, in the proposed algorithm auditory pitch group energy calculation take 1/450 of original algorithm's and excitation calculation take 1/3.57. In conclusion, the proposed algorithm is expected to be implemented into DSP-based real-time loudness meter.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.14 no.1
• /
• pp.51-64
• /
• 2002

To investigate long-period wave responses in Sokcho Harbor and Cheongcho lagoon, field measurements were made for long-and short-period waves and current velocities using a Directional Waverider, a ultrasonic-type wave gauge, four pressure-type wave gauges, and a current meter. From the data analysis, it was found that the Helmholtz resonant periods of Sokcho Harbor and Cheongcho lagoon are about 13.6 and 54.5 minutes, respectively, and the dominant period of wave induced current in the passage between Sokcho Harbor and Cheongcho lagoon is about 55.2 minutes which depends on Helmholtz resonant condition of the Cheongcho lagoon. It was also found that the energy level of the far-infra-gravity waves during storm conditions is very high compared with that during calm sea conditions. To investigate relationships between far-infra-gravity waves and short-period waves at offshore station, regression analyses were carried out especially for 1) heights, 2) periods, 3) direction and height, 4) height and period between short-and far-infra-gravity waves, respectively. The results showed that the long-period wave height is highly correlated with the short-period wave height. However, no special trend was found for the other relations. In the future far-infra-gravity wave heights on return period around Sokcho Harbor region can be suggested by using extreme value analyses of long term measured data.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.1
• /
• pp.739-744
• /
• 2020

This study evaluates the erosive potential and effects of mixed alcohols by analyzing the pH, titratable acidity, and fluorescence loss degree (△F). Following alcohol groups were investigated: Soju, Calamansi+soju, Yakult+soju, Cola+soju, and Energy drink+soju. The ratio of soju:beverage in the alcohol mixtures was 7:3. Ed. Notes: The sentence lacks clarity. Please review if the edit correctly portrays the meaning. If not, please revise appropriately. Measurement of the pH and titratable acidity (the amount of 1M NaoH solution required to raise to pH 5.5 (TA5.5) and 7.0 (TA7.0)) of alcohols was achieved by stirring with pH meter. The erosive effect of the alcohol mixtures on bovine tooth (△F) after 1, 2, 4, and 6 hours exposure were analyzed by quantitative light-induced fluorescence (QLF-D). All the mixed alcohols in this study showed an acidic pH, lower than 4.5. The average pH of mixed alcohols was 3.17 ± 0.50 whereas the pH of Soju was 8.6 ± 0.01. The TA5.5 and TA7.0 values of the mixed alcohols were 0.5~18 and 0.5~23.5, respectively. △F of the three tested mixed alcohol groups (except yakult+soju group) were observed to increase in a time-dependent manner. The calamansi mixed alcohol had the highest acidity potential and erosive effect among the tested groups. Taken together, the results indicate that the mixed alcohols have a strong erosive effect and potential on dental enamel.

• Korean Journal of Remote Sensing
• /
• v.33 no.3
• /
• pp.267-274
• /
• 2017

The purpose of this research was to develop and present methods to detect sinkholes which can exist underneath the surface of the ground. First, we buried a water tank with dimensions $1.8{\times}0.8{\times}0.8m$ at a distance of 1.8 m from the surface. This played the role of the sinkhole. Secondly, we created a square zone with sides 12 meters away from the buried water tank. Within this zone, we measured the gravity at 1-meter intervals using a Scintrex CG5 relative gravimeter with a resolution of 0.001 mGal. Additionally, we performed three-dimensional (3-D) gravity modeling to calculate the theoretical values of the relative gravity around our model sinkhole. The resulting values for the relative gravity around the sinkhole depended on the method used. The measured effect of gravity was 0.036 mGal and the effect calculated using 3-D modeling was 0.024 mGal. Our results suggest that sinkholes that are similar in size to the water tank used in this study can be detected using relative gravity surveys. Smaller sinkholes can be detected by reducing the intervals between the relative gravity measurements.

• Polymer(Korea)
• /
• v.35 no.6
• /
• pp.593-598
• /
• 2011

The IPA-co-HDO-co-(TPA/MA) copolymers for all-vanadium redox flow battery were synthesized by melt condensation polymerization using isophthalic acid(IPA), 1,6-hexandiol (HDO), terephthalic acid(TPA) and maleic anhydride(MA). The amination of chloromethylated IPA-co- HDO-co-(TPA/MA)(CIHTM) copolymer was carried out using trimethylamine, and the anion exchange membrane was also prepared by UV crosslinking reaction. The structure and thermal stability of IHTM copolymers were confirmed by FTIR, $^1H$ NMR, and TGA analysis. The anion membrane properties such as water uptake, ion exchange capacity, electric resistance and electrical conductivity, were measured by gravimetry, titration and LCR meter. The efficiency of the all-vanadium redox flow battery was analyzed. The ion exchange capacity, electric resistance and electrical conductivity were 1.10 meq/g, $1.98{\Omega}{\cdot}cm^2$, and 0.009 S/cm, respectively. The efficiency of charge-discharge, voltage, and energy for the allvanadium redox flow battery were 96.5, 74.6, 70.0%, respectively.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.23 no.1
• /
• pp.50-53
• /
• 2019

Purpose Yttrium-90 (Y-90) is high-energy beta emitters ($E{\beta}$, max = 2.28 MeV) with the mean penetration depth of 2.5 mm in tissue. Radioactive microspheres containing Y-90 is widely used for the transarterial radioembolization of hepatocellular carcinoma. However, bremsstrahlung radiation from Y-90 can cause the external radiation exposure to medical staff who handle the Y-90 microspheres. In this study, shielding device for Y-90 microspheres was developed to minimize the external radiation exposure. Materials and Methods Y-90 microsphere shielding device was made from 6 mm thicknesses of tungsten including the lead glass window. Radiation shielding ability of Y-90 microsphere shielding device was evaluated using 4 GBq of $SIR-Spheres^{(R)}$ Y-90 microspheres. The bremsstrahlung radiation was measured using radiation survey meter. Results The mean radiation dose of Y-90 microspheres in acrylic shield was $261.7{\pm}2.3{\mu}Sv/h$ (n=5) at 10 cm away from the shield. With the additional tungsten shielding device, it was $23.7{\pm}1.3{\mu}Sv/h$ (n=5). Thus, the bremsstrahlung radiation dose was decreased by 90.9%. At 50 cm away from the shield, bremsstrahlung radiation was reduced by 89.2% after using tungsten shielding device. Conclusion During the preparation and radioembolization of Y-90 microsphere, medical staff are exposed to external radiation. In this study, we demonstrated that the use of tungsten shielding device devices significantly reduced the amount of bremsstrahlung radiation. Y-90 microsphere tungsten shielding device can be highly effective in reducing the bremsstrahlung radiation.

• Science of Emotion and Sensibility
• /
• v.24 no.4
• /
• pp.149-156
• /
• 2021

The mechanical properties of a woven fabric made of SiC (silicon carbide) fibers were determined in this study using the KES-FB system. The woven fabric is used in high heat settings above 1500℃. Composite spun yarns were used to create SiC fibers. By analyzing the wearing properties, we studied the prospect of using the textiles as fire-retardant work clothes. Mechanical properties determine the wearing attributes. Therefore, the tensile linearity (LT), tensile resilience (RT), and shear stiffness (G) values of the fabric varied according to the yarn type (filament or spun yarn). The thickness, weight per square meter, and density of the fabric were found to have an effect on the shear hysteresis (2HG) and compression resilience (RC) values. In terms of wearable clothing qualities, the fabric qualities of the SiC composite yarn demonstrated the highest ratio of compressive energy to thickness (WC/T), which indicates bulkiness. The fabric manufactured from SiC composite yarns passed the KFI criteria for carbonation length and cumulative flame time in the flame-retardant test. Therefore, we discovered that the material can be used as a fire-resistant work cloth.