• Journal of The Korean Society of Grassland and Forage Science
• /
• v.30 no.1
• /
• pp.43-48
• /
• 2010

This study was conducted to compare the chemical composition, dry matter digestibility (DMD), dry matter intake, and utilization of nitrogen and energy of dairy goats (Saanen), when fed on imported timothy hay (IT), mixture grass hay (MG) and native grass hay (NG), respectively. The experimental trials were conducted from April, 2008 to December, 2008 at the environmental controlled barn of Chungnam National University. Twelve dairy goats (Saanen) were selected which had nearly the same body weight (24.2kg, male). The content of crude protein (CP) of MG hay was higher than that of other diets (p<0.05), but the contents of NDF, ADF, cellulose and lignin of IT and NG diet were higher than those of MG diet (p<0.05). The voluntary DM intake of dairy goats fed with herbage from MG diet (30.7/$BW_{kg}$/day) was higher than that of other diets, but no significant difference was observed between that of IT diet and NG diet (p>0.05). The DMD of MG diet (69.8%) was higher than that of NG diet (62.2%) and IT diet (60.8%) (p<0.05), but no significant difference was observed between that of IT diet and NG diet (p>0.05). In nitrogen utilization, the apparently digested N %, retained % and biological value of dairy goats fed with herbage from MG diet were higher and TG diet was lower (p<0.05). In energy utilization, digestible energy and the energy of apparently digested minus urinary losses of MG diet were higher than those of IT diet and NG diet (p<0.05), but no significant difference was found between IT diet and NG diet (p>0.05). Based on the results, the dry matter intake, DMD and utilization of nitrogen and energy of dairy goats of MG were higher than those of IT diet and NG diet (p<0.05), the DMD and biological value (%) of NG diet was higher than that of IT diet (p<0.05).

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.3
• /
• pp.223-227
• /
• 2016

Power supplies make the load compatible with its power source. DC power supplies are extensively used with most electrical and electronic appliances such as computers, television, and audio sets. The presence of non-linear loads results in a low power factor and higher harmonics in the power system. Several techniques for power-factor correction and harmonic reduction have been reported in the literature. This paper proposes a bridgeless boost converter that improves the power factor and reduces the harmonic content in input line currents as compared to full-bridge rectifiers. This bridgeless boost converter eliminates the need of a line-voltage bridge rectifier in conventional boost converter and thereby reduces conduction losses. The effectiveness of the proposed scheme is verified by computer simulations by using the PSIM software.

• Journal of Biosystems Engineering
• /
• v.3 no.1
• /
• pp.33-46
• /
• 1978

To get the goal of self-supply of food grain, improvement of post-harvest grain operations in rural area is under consideration as an important task of agriculture in Korea. This is study is focused on elimination of losses and deteriorations of grain and reduction of labour requirements and funds for post-harvest grain operations. The purpose of this study are presentation of basic data referring to conventional post-harvest grain operations in rural area and suggestion of improving methods for the operations, and also finding out reasonable operating processes of the operations. The result of this study are follows; 1. Grain drying in-the-filed which is performed before threshing has major factors of grain loss during drying, and so should be restrained as possible. Combine harvesting system is recommended among other king of mechanized harvesting systems for restraining in-the-field drying and securing available labors for drying. 2. It is predicted that mechanical grain drying could be prevalent when combine harvesting is taken place. Recommended grain drier for pre-combine harvesting system and for combine harvesting system is batch-type drier and circulating -type drier, respectively. 3. As existing farm storages for grain have insufficient spaces and offer poor conditions for grain storing , it is greatly needed to build up new storage which store only grains. And it is concluded that storing grain in community common storages in desirable. 4. Power supplying system for milling machinery in local milling plants, that a large capacity prime mover supplies power to 4 to 6 kinds of milling machinery simultaeously, should be converted to a system of several small capacity prime movers supplying power to each machiner y for the purpose of reducing extra consumption of energy. 5. Governmental grain, of which Korean farms produced, should be milled and stored in the local milling plant successively for the purpose of reducing transportation fee and stroing facilities. 6. Furture post-havest grain operations-drying, storing and milling should be periormed successively in he community common plant. And average optimum processing capacity of the plant is estimated about 300 metric ton of grain every year.

• 한국HCI학회:학술대회논문집
• /
• 2009.02a
• /
• pp.45-51
• /
• 2009

In this paper, a transparency analysis and network-adaptive transport scheme are proposed in order to improve transparency of EBA-based force-reflecting teleoperation. EBA guarantees stability of force-reflecting teleoperation over network delay and loss but has limitation that it cannot overcome transparency deterioration of haptic interactions. The proposed transparency analysis quantifies the force feedback distortion caused by network delay and loss. Based on the analysis, the proposed haptic data synchronization and transmission rate control schemes adapt synchronization delay and transmission rate to current network state for more transparent haptic interaction. Through Matlab/Simulink simulations, it is confirmed that the proposed analysis provides an acceptable quantification method about haptic interaction quality and that the proposed haptic data transport scheme effectively improves haptic interaction quality with respect to network delays and losses.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.5
• /
• pp.96-104
• /
• 2004

This paper proposes a dc power regenerating systems, which can generate the excessive dc power from dc bus line to ac supply in substations for traction system The proposed regeneration inverter system for dc traction can be used as both an inverter and an active power filter(APF). As an regeneration inverter mode, it can recycle regenerative energy caused by decelerating tractions and as an active power filter mode, it can compensate for harmonic distortion produced by the rectifier substation. From the viewpoint of both power capacity and switching losses, the system is designed on the basis of three phase PWM inverters and composed of parallel inverters, output transformers, and an LCL filter.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.2
• /
• pp.16-26
• /
• 2010

The transmission valuation methodology we propose here captures the interaction between generation and transmission investment decisions recognizing that a transmission expansion can impact the profitability of new resources investment, so that a methodology should consider both the objectives of investors in resources and the transmission planner. In this perspective, this paper purports to develop the mixed-integer programming based transmission expansion planning optimization software, which is well designed to determine the construction time and place of new generators, transmission lines, and substations as well as their capacities to minimize total expenditures related to their investment and operations while meeting technical constraints such as capacity margin, constitution ratio of power resources, spinning reserves, energy and fuel constraints, transmission line outages and losses, pi-type branching, and so on. Finally, Garver's simple system is adopted to validate not simply the accuracy but the efficiency of the proposed model in this paper.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.6
• /
• pp.2256-2261
• /
• 2015

In the power plant using high temperature fuel cells such as Molten Carbonate Fuel Cell(MCFC), and Solid Oxide Fuel Cell(SOFC), the generated electric power per area of power generation facilities is much higher than any other renewable energy sources. - High temperature fuel cell systems are capable of operating at MW rated power output. - It also has a feature that is short for length of the line for connecting the interior of the generation facilities. In normal condition, these points are advantages for voltage drops or power losses. However, in abnormal condition such as fault occurrence in electrical system, the fault currents are increased, because of the small impedance of the short length of power cable. Commonly, to minimize the thermal-mechanical stresses on the stack and increase the systems reliability, we divided the power plant configuration to several banks for parallel operation. However, when a fault occurs in the parallel operation system of power main transformer, the fault currents might exceed the interruption capacity of protective devices. In fact, although the internal voltage level of the fuel cell power plant is the voltage level of distribution systems, we should install the circuit breakers for transmission systems due to fault current. To resolve these problems, the SFCL has been studied as one of the noticeable devices. Therefore, we analyzed the effect of application of the SFCL on bus tie in a fuel cell power plants system using PSCAD/EMTDC.

• Korean Journal of Soil Science and Fertilizer
• /
• v.50 no.4
• /
• pp.275-284
• /
• 2017

The food situation in North Korea (Democratic People's Republic of Korea, DPRK) has been in difficulty situation because of a shortage of energy, and of raw materials such as fertilizer and agricultural chemicals. The international agricultural aid programs can alleviate some difficulties in the agricultural areas, but the policies and measures in North Korea can not help difficulties in the agriculture due to the institutional obstacles enforced by DPRK. The arable area of DPRK is approximately $20,000km^2$, of which $14,000km^2$ is well for cereal cultivation. Fertilizer supplies in recent years between 700,000 and 750,000 tons annually were less than 50% of the normal requirement. Also, North Korea strongly needed to inject phosphorus fertilizer and lime to increase the fertility. Soil degradation in DPRK was characterized by physical and chemical changes caused by rapid loss of clay particles and organic matter. Intensive ploughing and tilling to grow crops may lead to massive soil degradation and declining yields. Although farmers in the DPRK have faced numerous challenges, not least of which are soil erosion, scarce inputs and extreme weather like drought, flooding and cold spells. Therefore farmers should be encouraged to adopt more environmentally sound cropping practices, to access quality seeds and planting materials and to reduce losses after the harvest.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.60 no.2
• /
• pp.25-36
• /
• 2018

Drip irrigation system is a low energy cost method which can efficiently save and supply water by dropping water slowly on the crop's root zone during crop growth. In the drip irrigation system, disk filters take an important role to physically remove impurity (inorganic and suspended organic) particles present in agricultural water which can cause emitter clogging. For the purpose, both top-and-bottom surfaces of the disk are grooved in micron size flowing from outside to inside. However, many congested flow paths in disk filter media incur higher head loss of inflow water resulting in relatively decreasing velocities depending on operation time than sand and mesh filters. Therefore, it is important to optimize the structure of disk filter in micro irrigation system. The head loss of disk filter media takes also charge of more than 60 % of total head loss in whole disk filter. This study is to find the appropriate cross-sectional shape of the disk groove to minimize the head loss by executing the experiment. The experiment used three disk filters that have similar filter body but have a half-elliptic and two kinds of triangular cross sections. The experimental results showed that the disk filter with half-elliptic cross sections of disk grooves have less head loss than the disk filter with regular triangular one.

• Geomechanics and Engineering
• /
• v.12 no.1
• /
• pp.53-69
• /
• 2017

Rock burst may cause serious casualties and property losses, and how to conduct effective monitoring and warning is the key to avoid this disaster. In this paper, we reviewed both the rock burst mechanism and the principle of using electromagnetic radiation (EMR) from coal rock to monitor and forewarn rock burst, and systematically studied EMR monitored data of 4 rock bursts of Qianqiu Coal Mine, Yima Coal Group, Co. Ltd. Results show that (1) Before rock burst occurrence, there is a breeding process for stress accumulation and energy concentration inside the coal rock mass subject to external stresses, which causes it to crack, emitting a large amount of EMR; when the EMR level reaches a certain intensity, which reveals that deformation and fracture inside the coal rock mass have become serious, rock burst may occur anytime and it's necessary to implement an early warning. (2) Monitored EMR indicators such as its intensity and pulses amount are well and positively correlated before rock bursts occurs, generally showing a rising trend for more than 5 continuous days either slowly or dramatically, and the disaster bursts generally occurs at the lower level within 48 h after reaching its peak intensity. (3) The rank of EMR signals sensitive to rock burst in a descending order is maximum EMR intensity > rate of change in EMR intensity > maximum amount of EMR pulses > rate of change in the amount of EMR pulses.