• 한국화재소방학회논문지
• /
• 제34권2호
• /
• pp.1-6
• /
• 2020

연소상태의 가연물에서 방출되는 에너지는 비정상적인 특성과 폭넓은 크기규모를 가지기 때문에 다른 화재물리량에 비해 측정하기 어려운 문제 중의 하나로 인식된다. 본 연구는 실험실규모의 화재 발열량계에서 이산화탄소생성법과 산소소모법에 의해 계산된 측정 발열량을 비교하여 상대오차를 분석하였다. 메탄 버너화재에 대해 산소소모계수와 CO₂ 질량유량의 상관관계는 6% 이내에서 우수한 선형성을 보였다. CDG법의 계산에서 CO에 의한 발열량 기여분은 CO₂에 의한 기여분에 비해 7% 이내로 크지 않게 나타났다. 준정상상태의 기준 버너 발열량 대비 OC법과 CDG법의 선형성은 1% 이내를 보여 발열량 측정에 있어서 CDG법은 상호 보완할 수 있는 측정수단으로 활용될 수 있다.

• 대한전자공학회논문지SD
• /
• 제40권9호
• /
• pp.685-691
• /
• 2003

본 논문에서는 고속 통신 시스템 응용을 위한 12b 100 MS/s CMOS D/A 변환기(DAC) 회로를 제안한다. 제안하는 DAC는 전력소모, 면적, 선형성 및 글리치 에너지 등을 고려하여, 상위 8b는 단위 전류셀 매트릭스 (unit current-cell matrix)로 나머지 하위 4b는 이진 전류열 (binary-weighted array)로 구성하였다. 제안하는 DAC는 동적 성능을 향상시키기 위해 새로운 구조의 스위치 구동 회로를 사용하였다. 시제품 DAC회로 레이아웃을 위해서는 캐스코드 전류원을 단위 전류셀 스위치 매트릭스와 분리하였으며, 제안하는 칩은 0.35 um single-poly quad-metal CMOS 공정을 사용하여 제작되었다. 측정된 시제품의 DNL 및 INL은 12b 해상도에서 각각 ±0.75 LSB와 ±1.73 LSB이내의 수준이며, 100 MS/s 동작 주파수와 10 MHz 입력 주파수에서 64 dB의 SFDR을 보여준다. 전력 소모는 3 V의 전원 전압에서 91 mW이며, 칩 전체 크기는 2.2 mm × 2.0 mm 이다.

• 한국의류산업학회지
• /
• 제8권3호
• /
• pp.357-362
• /
• 2006

This study is to evaluate the objective sensibility of the commercial lining fabrics. Five kinds of the linings were collected by adding taffetas with four kinds of fibers (polyester, nylon, rayon, and acetate) to one polyester stretch fabric. The six basic mechanical and hand properties were studied by using KES-FB system (Kawabata Evaluation System). The result of measuring the mechanical properties shows that polyester has high bending rigidity (B), that polyester-stretch has a high value of linearity of load-extension curve (LT), tensile energy (WT), tensile resilience (RT), and coefficient of friction (MIU) and a low value of bending rigidity(B), shear property, and geometrical roughness (SMD). The nylon has a high value of bending rigidity (B), shear property, and compression resilience (RC). The rayon has a high value of coefficient of friction (MIU) and linearity of compression-thickness curve (LC) and a low value of shear property, and the acetate has a low value of shear property. The result of hand value shows that polyester, nylon, and acetate are a high value of KOSHI (stiffness), NUMERI (smoothness), and FUKURAM (fullness & softness), and they feel stiff and massive, that rayon has a low value of NUMERI and FUKURAMI. The total result of hand value shows that polyester taffeta and polyester stretch fabric are about the same as the best material for the lining of a woman's dress for spring and summer, and the next thing is acetate, but nylon and rayon are somewhat inferior materials. This provides a fundamental data for the comfortable clothing production of a higher value-added product through the study on the mechanical and hand properties of the lining as well as the right side of fabrics.

• 한국방사선학회논문지
• /
• 제15권1호
• /
• pp.79-83
• /
• 2021

방사선 치료 영역에서 전자선은 표재성 병변 치료에 자주 쓰인다. 전자선은 빔 경로에 것들과 상호 작용하여 선량측정에 영향을 끼치기에 정확한 측정이 요구된다. 하지만 전자선 정도관리에 관한 연구는 이루어지고 있지 않는 실정이다. 이에 본 연구에서는 전자선 정도관리를 위한 기초연구로 PbO 기반의 선량계를 제작하였다. 그리고 6, 9, 12 MeV 에너지에 따른 재현성, 선형성을 분석하여 계측정확성과 정밀성을 평가하였다. 재현성 측정결과 6, 9, 12 MeV에서 각각 1.024%, 1.019%, 0.890%의 RSD 값으로 나타났다. 그리고 선형선 측정결과에서는 6, 9, 12 MeV에서 모두 0.9999 R2로 나타났다. 두 평가 모두 우수한 결과로 PbO 선량계의 계측정확성과 정밀성이 매우 우수한 것으로 나타났다.

• Steel and Composite Structures
• /
• 제42권6호
• /
• pp.779-789
• /
• 2022

This work presents a non-linear cylindrical bending analysis of functionally graded plate reinforced by single-walled carbon nanotubes (SWCNTs) in thermal environment using a simple integral higher-order shear deformation theory (HSDT). This theory does not require shear correction factors and the transverse shear stresses vary parabolically through the thickness. The material properties of SWCNTs are assumed to be temperature-dependent and are obtained from molecular dynamics simulations. The material properties of functionally graded carbon nanotube-reinforced composites (FG-CNTCRs) are considered to be graded in the thickness direction, and are estimated through a micromechanical model. The non-linear strain-displacement relations in the Von Karman sense are used to study the effect of geometric non-linearity and the solution is obtained by minimization of the total potential energy. The numerical illustrations concern the nonlinear bending response of FG-CNTRC plates under different sets of thermal environmental conditions, from which results for uniformly distributed CNTRC plates are obtained as benchmarks.

• Nuclear Engineering and Technology
• /
• 제55권7호
• /
• pp.2662-2669
• /
• 2023

For the precise measurements of special nuclear materials (SNM) including Pu and Am isotopes, we have used phoswich detector combination of two single crystal scintillators of Gd₃Ga₃Al₂O₁₂:Ce and CsI:Tl. High detection efficiency and sensitivity along with high figure of merit for the discrimination of these phoswich detectors ensures the detection and discrimination of thermal neutrons and gammas from spontaneous fission of Pu and other isotopes in presence of high gamma background. Using this detector, the low energy gammas, which is stopped completely in 1mm thick disc of GGAG, can be also discriminated from high energies gamma and shows linearity in wide range of sample quantities. By changing only the appropriate shielding, the similar setup was used for thermal neutron detection and shows a very good linearity over wide range. The quantity of a test sample was also calculated accurately by using the measured calibrated plot.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 D
• /
• pp.754-757
• /
• 2000

Si PIN diodes are subject to be damaged from the exposure of fast neutron by displacement of Si lattice structure. The defects are effective recombination centers for carriers which migrate through the base region of the PIN diode when forward voltage is applied. It causes an increase in current and a decrease in resistivity of the diode. This paper presents the development of a neutron sensor based on displacement damage effect. PIN diodes having various structures were made by micro-fabrication process, and neutron beam test was performed to identify neutron damage effect to the diode. From a result of the test, it was shown that the forward voltage drop of the diode, at a constant current, has good linearity for neutron dosage. Also it was found that the newton dosage can be measured by the pin diode neutron dosimeter with constant current power.

• 한국지진공학회논문집
• /
• 제22권4호
• /
• pp.245-251
• /
• 2018

In this paper, we address some issues in existing seismic hazard closed-form equations and present a novel seismic hazard equation form to overcome these issues. The presented equation form is based on higher-order polynomials, which can well describe the seismic hazard information with relatively high non-linearity. The accuracy of the proposed form is illustrated not only in the seismic hazard data itself but also in estimating the annual probability of failure (APF) of the structural systems. For this purpose, the information on seismic hazard is used in representative areas of the United States (West : Los Angeles, Central : Memphis and Kansas, East : Charleston). Examples regarding the APF estimation are the analyses of existing platform structure and nuclear power plant problems. As a result of the numerical example analyses, it is confirmed that the higher-order-polynomial-based hazard form presented in this paper could predict the APF values of the two example structure systems as well as the given seismic hazard data relatively accurately compared with the existing closed-form hazard equations. Therefore, in the future, it is expected that we can derive a new improved APF function by combining the proposed hazard formula with the existing fragility equation.

• 드라이브 ㆍ 컨트롤
• /
• 제16권4호
• /
• pp.56-64
• /
• 2019

Recently, as the environmental regulation for earth moving equipment has been tightened, advanced systems using electronic control have been introduced for energy savings. An IMV(Independent Metering Valve), which consists of four 2-way valves, is one of the electro-hydraulic control systems that provides more flexible controllability and potential for energy savings in excavators, when compared to the conventional 4-way spool valve system. To fully realize an IMV, a two-stage bi-directional flow control valve which can regulate the large amount of flow in both directions, should be developed in advance. A simple design that allows proportional flow control to apply the pilot pressure from the current-controlled solenoid to the spring loaded flow control spool and thus valve displacement, is proportional to the solenoid current. However, this open-loop type valve is vulnerable to flow force which directly affects the valve displacement. Force feedback servo of which the position loop is closed by the feedback spring which interconnects the solenoid valve and flow control spool, could compensate for the flow force. In this study, linearity for the solenoid current input and robustness against load pressure disturbance is investigated by linear analysis of the static nonlinear equations for the IMV proportional flow control valve with feedback spring. Gains of the linear system confirm the performance improvement with the feedback spring design.

• 한국의류산업학회지
• /
• 제6권5호
• /
• pp.660-666
• /
• 2004

This article describes the change of hand value of chitosan crosslinked cotton fabrics. The chitosan crosslinked cotton fabrics were manufactured by mercerizing process using epichlorohydrin(ECH) as crosslinkins agent, 2% aqueous acetic acid as a solvent of chitosan and ECH, and 20% aqueous sodium hydroxide as a mercerizing agent and crosslinking catalyst. Cotton fabrics were dipped in the mixed solution of chitosan and ECH, picked up by mangle, mercerized and crosslinked in NaOH solution, and finally wash and dry. Mechanical and physical properties of the chitosan crosslinked fabric were investigated using Kawabata Evaluation System(KES) and other instruments. Tensile energy and tensile strain were decreased with the increase of the concentration of chitosan. Tensile resilience, compression resilience bending rigidity, bending hysteresis, shear stiffness, shear hysteresis, coefficient of friction, geometrical roughness, compression linearity, compressional energy, and thickness were increased with the increase of the concentration of chitosan. On the other hand, bending rigidity, bending hysteresis, coefficient of friction, geometrical roughness, compressional resilience, and thickness were increased with the increase of the concentration of crosslinking agent(epichlorohydrin).