• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2014년도 추계학술대회
• /
• pp.561-564
• /
• 2014

본 논문에서는 배터리 관리 기능을 갖는 빛 에너지 하베스팅 충전기 회로를 제안하였다. 제안된 회로는 MPPT(Maximum Power Point Tracking)를 통해 빛 에너지를 솔라 셀로부터 수확하고, 수확한 에너지를 외부 배터리 커패시터에 연결하여 충전한다. 배터리 관리회로(Battery Management)의 신호에 따라, 배터리 커패시터의 충전 상태를 조절한다. 제안된 회로는 0.35um CMOS 공정으로 설계하였으며, 모의실험을 통해 동작을 검증하였다. 설계된 회로의 최대효율은 84.8%이며, 칩 면적은 패드를 포함하여 $1350um{\times}1200um$이다.

• Journal of Electrical Engineering and Technology
• /
• 제11권3호
• /
• pp.707-714
• /
• 2016

We present a piezoelectric energy harvester with stopper-engaged dynamic magnifier which is capable of significantly increasing the operating bandwidth and the energy (power) harvested from a broad range of low frequency vibrations (<30 Hz). It uses a mass-loaded polymer beam (primary spring-mass system) that works as a dynamic magnifier for another mass-loaded piezoelectric beam (secondary spring-mass system) clamped on primary mass, constituting a two-degree-of-freedom (2-DOF) system. Use of polymer (polycarbonate) as the primary beam allows the harvester not only to respond to low frequency vibrations but also generates high impulsive force while the primary mass engages the base stopper. Upon excitation, the dynamic magnifier causes mechanical impact on the base stopper and transfers a secondary shock (in the form of impulsive force) to the energy harvesting element resulting in an increased strain in it and triggers nonlinear frequency up-conversion mechanism. Therefore, it generates almost four times larger average power and exhibits over 250% wider half-power bandwidth than those of its conventional 2-DOF counterpart (without stopper). Experimental results indicate that the proposed device is highly applicable to vibration energy harvesting in automobiles.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2013년도 추계학술대회
• /
• pp.750-753
• /
• 2013

배터리 기반 센서 시스템과 달리 태양 에너지 기반 센서 시스템에서는 정확한 양은 알 수 없지만 적어도 주기적으로 에너지가 수집될 수 있으므로 에너지 사용의 최소화가 목표가 아니라 에너지 사용의 최적화가 목표가 된다. 본 연구에서는 네트워크 토폴로지 최적화를 목적으로 태양 에너지 수집형 센서 시스템에서 잔존 에너지양에 따른 3단계 전송 파워 조절 알고리즘을 제안한다. 아울러 이 기법이 전체 센서 네트워크의 성능에 어떤 영향을 미치는지 실험을 통하여 살펴보았는데, 대부분의 지표에서 전송 파워를 고정한 기법들 보다 우수한 성능을 보이는 것을 확인할 수 있다.

• 한국유체기계학회 논문집
• /
• 제18권6호
• /
• pp.27-30
• /
• 2015

In this study, we attempted to harvest energy using water droplet based on Reverse Electro Wetting On Dielectric (REWOD) phenomenon between water droplet and dielectric surface without external bias. REWOD device can be fabricated via simple coating process, which is highly economic and easy. We believe that our system is well-suited for IoT(Internet of Things) embedded electronics that require low but consistent electricity. Moreover, our device can be integrated with window to generate electricity upon raindrops.

• 한국해양공학회지
• /
• 제35권5호
• /
• pp.360-368
• /
• 2021

The need for energy harvesting in marine environments is gradually increasing owing to the energy limitation of marine robots. To address this problem, a catamaran-type sail drone (CSD), which can harvest marine energies such as wind and solar, was proposed in a previous study. However, it was designed and manufactured without considering the stability, optimal hull-form, and maintenance. To resolve these problems, a CSD with two keels, a performance estimator, V-shape hulls, and modularized components is proposed and its mechanism is developed in this study. To verify the performance of the CSD, the performance estimation using smoothed-particle hydrodynamics (SPH) and the heading control using fuzzy logic controller (FLC) are performed. Simulation results show the attitude stability of the CSD and the experimental results show the straight path of the CSD according to wind conditions. Therefore, the CSD has potential applications as an energy harvesting system.

• 한국전기전자재료학회논문지
• /
• 제35권2호
• /
• pp.119-128
• /
• 2022

Recent advancement of Internet of Things (IoT) and energy harvesting technology enable realization of flexible thermoelectric energy harvester (f-TEH), with technological prowess for use in biomedical monitoring system integrated applications. To expand a flexible thermoelectric energy harvesting platform, the f-TEH must be required for optimized flexible thermoelectric materials and device structure. In response to these demands related to thermoelectric energy harvesting, many research groups have investigated various f-TEHs applied as a power source for wearable electronics. As a key member of the f-TEH, film-based f-TEHs possess significant applicability in research to realize self-powered wearable electronics, owing to their excellent flexibility, low thermal conductivity, and convenient fabrication process. Thus, based on the rapid growth of thermoelectric film technology, this review aims to overview comprehensively the f-TEH made of various inorganic/organic thermoelectric materials including developed fabrication methods, high thermoelectric performance, and wide-range applications.

• 한국산업융합학회 논문집
• /
• 제27권4_2호
• /
• pp.991-999
• /
• 2024

This study is based on research on a magnetic induction amplification power generation system using quantum fluctuations, and aims to confirm the similarity to the meissner effect through quantum analysis using magnets and suggest the possibility of utilizing alternative energy. Research was conducted on increasing the efficiency of motors based on the similarity between magnetic quantum array experimental devices and the superconductor phenomenon. It was confirmed that the experimental device that arranged the quantum of magnetism rotated by canceling out the magnetism by having a resistance value of "0", which is not a general characteristic of magnetism that generates attractive force. This is an observation of the similarity between the superconductor phenomenon and the meissner effect, and it was confirmed that material synthesis or temperature had little effect. This study confirmed that the efficiency is more than 20 times that of existing power on average. Therefore, this study suggests that there is a possibility of commercialization of an Energy Harvesting System (EHS) that can produce and store energy.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2013년도 추계학술대회
• /
• pp.379-382
• /
• 2013

기존의 빛 에너지 하베스팅 회로에서는 MPPT(Maximum Power Point Tracking) 기능을 구현하기 위해 전력변환기(power converter)를 동작시키기 위한 클럭의 주파수나 듀티 싸이클(duty cycle)을 지속적으로 변화시키는 방법을 사용하고 있다. 본 논문에서는 전력변환기에 전력 공급을 위한 스위치의 듀티 싸이클을 제어하여 MPPT 기능을 구현하는 새로운 방법을 제안하였다. 제안된 회로는 0.35um CMOS 공정으로 설계 되었으며 칩 면적은 패드를 포함하여 $770um{\times}800um$이다.

• ETRI Journal
• /
• 제46권4호
• /
• pp.581-594
• /
• 2024

In this study, a planar printed circuit board (PCB) coil with FR4 substrate was designed and simulated using the finite element method, and the results were analyzed in the frequency domain. This coil can be used in wireless power transfer (WPT) as a transmitter or receiver, eliminating wires. It can also be used as the receiver in radio frequency energy-harvesting (RF-EH) systems by optimizing the planar PCB coil to convert radio-wave energy into electricity, and it can be employed as an excitation (transmitter) or receiver coil in nuclear magnetic resonance (NMR) spectroscopy. This PCB coil can replace the conventional coil, yielding a reduced occupied volume, a fine-tuned design, reduced weight, and increased efficiency. Based on the calculated gain, power, and electromagnetic and electric field results, this planar PCB coil can be implemented in WPT, NMR spectroscopy, and RF-EH devices with minor changes. In applications such as NMR spectroscopy, it can be used as a transceiver planar PCB coil. In this design, at frequencies of 915 MHz and 40 MHz with 5 mm between coils, we received powers of 287.3 μW and 480 μW, respectively, which are suitable for an NMR coil or RF-EH system.

• 센서학회지
• /
• 제28권1호
• /
• pp.64-70
• /
• 2019

Wireless sensors have been developed in numerous ways for enhancing the convenience of installation, management and maintenance of sensors. Energy harvesting wireless sensors, which can collect energy from the external environment for permanent usage without the need of recharging and exchanging batteries, have been developed and employed used in Internet of Things and at various industrial sites. Energy harvesting wireless sensors are significantly affected by the sensor lifespan to sudden variation in the external environment. Furthermore, reduction in the sensor operating timespan can greatly affect the characteristics of the devices connected through a network. In this paper, a system performance index is proposed that can comprehensively evaluate the lifespan of a solar cell wireless sensor, determine the characteristics of devices connected to the associated network, and recommend dynamic power distribution control for improving the system performance index. Improvement in the system performance index was verified by applying the proposed dynamic power distribution control to an air conditioner network system using a solar cell wireless sensor. Obtained results corroborate that the dynamic power distribution control can extend the lifespan of the incorporated wireless sensor and reduce the air conditioner's power consumption.