• 제목/요약/키워드: Energy flux density

검색결과 263건 처리시간 0.036초

Comparative Analysis on Magnetic Field and Inductances of Slotless Permanent Magnet Machine with Two Types of Winding based on Analytical Method

  • Jang, Seok-Myeong;Kim, Jeong-Man;Jeong, Jae-Hoon;Han, Cheol;Ahn, Ji-Hun;Chang, Duk-Jin;Park, Hyun-Jun
    • Journal of Magnetics
    • /
    • 제17권3호
    • /
    • pp.190-195
    • /
    • 2012
  • This paper presents an analytical approach to the magnetic field and the inductances of slotless permanent magnet machines with two types of winding. On the basis of a magnetic vector potential and a two-dimensional polar system, analytical solutions for flux density due to a permanent magnet and current are obtained. In addition, self and mutual inductances are obtained using the energy relationship. The analytical results are extensively validated by the nonlinear finite element method and by experimental results.

하계 득량만의 연직혼합과 관련된 바람 (태풍), 조석, 태양에너지의 영향 (The Effect of Wind (Typhoon), Tide and Solar Radiation for the Water Stratification at Deukryang Bay in Summer , 1992)

  • 이병걸;조규대;홍철훈
    • 수산해양기술연구
    • /
    • 제31권3호
    • /
    • pp.256-263
    • /
    • 1995
  • 득량만에서 발생되는 수괴의 연직 구조의 변동을 역학적으로 규명하기 위하여 Simpson and Hunter(1974)와 Simpson and Bowers(1981)의 에너지식을 이용하여 수괴의 연직 환합과 관련된 바람, 태양 그리고 조류 에너지를 계산하여 보았다. 그 결과 바람에너지에 비하여 태양 에너지와 조류에너지가 약 10배 종도 큼을 알 수 있었다. 그리고 태양 에너지의 경우 관측 기간 동안 큰 변동이 없는 반면 조류의 경우 대조기와 소조기대의 에너지가 약 10배 정도 차이가 남을 알 수 있었다. 이러한 결과로 미루어 볼 때 하계 득량만의 수괴의 연직 구조변동은 대.소조기 변동에 따른 조류의 세기에 의하여 결정됨을 잘 알 수 있었다. 그리고 태풍에 의한 에너지의 변동을 살펴보기 위하여 Fujita의 경험적인 태풍 모델을 도입하여 태풍이 득량만의 좌측과 우측을 통과할 때의 에너지의 변동을 살펴보았다. 그 결과 태풍 에너지는 조류 에너지의 크기와 매우 비슷하며 특히 대조기때의 조류 에너지의 크기와 매우 유사함을 알 수 있었다. 여기서 주목되는 것은 득량만에서 연직 혼합을 일으키는 10-15m/sec의 바람 에너지의 크기와 30-40cm/sec 세기의 조류가 가지고 있는 조류에너지의 크기가 매우 비슷함을 알 수 있다. 따라서 득량만의 경우 조류에 의한 수괴의 연직 혼합의 세기는 태풍 에너지와 거의 비슷함을 알 수 있다. 이러한 결과를 미루어 볼 때 대조기때의 득량만의 조류 에너지는 거의 태풍 통과시 바람 에너지와 거의 비슷함을 알 수 있었다. 이러한 연구는 Simpson(1981)의 결과와도 매우 유사하게 나타났다.

  • PDF

Quantitative Evaluation of Radiation Dose Rates for Depleted Uranium in PRIDE Facility

  • Cho, Il Je;Sim, Jee Hyung;Kim, Yong Soo
    • Journal of Radiation Protection and Research
    • /
    • 제41권4호
    • /
    • pp.378-383
    • /
    • 2016
  • Background: Radiation dose rates in PRIDE facility is evaluated quantitatively for assessing radiation safety of workers because of large amounts of depleted uranium being handled in PRIDE facility. Even if direct radiation from depleted uranium is very low and will not expose a worker to significant amounts of external radiation. Materials and Methods: ORIGEN-ARP code was used for calculating the neutron and gamma source term being generated from depleted uranium (DU), and the MCNP5 code was used for calculating the neutron and gamma fluxes and dose rates. Results and Discussion: The neutron and gamma fluxes and dose rates due to DU on spherical surface of 30 cm radius were calculated with the variation of DU mass and density. In this calculation, an imaginary case in which DU density is zero was added to check the self-shielding effect of DU. In this case, the DU sphere was modeled as a point. In case of DU mixed with molten salt of 50-250 g, the neutron and gamma fluxes were calculated respectively. It was found that the molten salt contents in DU had little effect on the neutron and the gamma fluxes. The neutron and the gamma fluxes, under the respective conditions of 1 and 5 kg mass of DU, and 5 and $19.1g{\cdot}cm^{-3}$ density of DU, were calculated with the molten salt (LiCl+KCl) of 50 g fixed, and compared with the source term. As the results, similar tendency was found in neutron and gamma fluxes with the variation of DU mass and density when compared with source spectra, except their magnitudes. Conclusion: In the case of the DU mass over 5 kg, the dose rate was shown to be higher than the environmental dose rate. From these results, it is concluded that if a worker would do an experiment with DU having over 5 kg of mass, the worker should be careful in order not to be exposed to the radiation.

CAN A WIND MODEL MIMIC A CONVECTION-DOMINATED ACCRETION FLOW MODEL\ulcorner

  • Chang, Heon-Young
    • Journal of Astronomy and Space Sciences
    • /
    • 제18권1호
    • /
    • pp.1-6
    • /
    • 2001
  • In this paper we investigate the properties of advection-dominated accretion flows (ADAFs) in case that outflows carry away infalling matter with its angular momentum and energy. Positive Bernoulli number in ADAFs allow a fraction of the gas to be expelled in a form of outflows. The ADAFs are also unstable to convection. We present self-similar solutions for advection-dominated accretion flows in the presence of outflows from the accretion flows(ADIOS). The axisymmetric flow is treated in variables integrated over polar sections and the effects of outflows on the accretion flow are parameterized for possible configurations compatible with the one dimensional self-similar ADAF solution. We explicitly derive self-similar solutions of ADAFs in the presence of outflows and show that the strong outflows in the accretion flows result in a flatter density profile, which is similar to that of the convection-dominated accretion flows(CDAFs) in which convection transports the angular momentum inward and the energy outward. There two different versions of the ADAF model should show similar behaviors in X-ray spectrum to some extent. Even though the two models may show similar behaviors, they should be distinguishable due to different physical properties. We suggest that for a central object of which mass is known these two different accretion flow should have different X-ray flux value due to deficient matter in the wind model.

  • PDF

폴리실록산이미드 막의 제조와 투과증발특성 (The Preparation of Polysiloxaneimide Membranes and their Pervaporation Properties)

  • 장연희;김정훈;이수복;이희우
    • 공업화학
    • /
    • 제10권7호
    • /
    • pp.1041-1045
    • /
    • 1999
  • 세 가지 종류의 방향족 다이안하이드라이드(6FDA, BTDA, PMDA)와 polydimethylsiloxane(SIDA, 평균 분자량 800)을 단독 다이아민으로 하여 축중합반응에 의하여 폴리실록산이미드(PSI) 막을 제조하였다. 이들은 모두 실록산 30~40 wt % 함유하고 있는 고무상의 고분자로서 낮은 밀도, 높은 비자유부피, 그리고 낮은 표면에너지를 가지고 있었다. 제조된 PSI막을 0.05 wt %의 4가지 혼합용매(ethyl acetate, methylene chloride, trichloroethylene, toluene)에 대해 투과증발 특성을 알아본 결과 이들은 유기용매의 소수성 경향이 증가할수록 높은 선택도와 투과도를 보였다.

  • PDF

발포 알루미늄이 삽입된 환형관에서의 열전달 및 유동특성 (Heat Transfer and Flow Characteristics in an Annulus Filled with Aluminum Foam)

  • 노주석;한영희;이계복;이충구
    • 에너지공학
    • /
    • 제15권1호
    • /
    • pp.60-66
    • /
    • 2006
  • 발포 알루미늄이 삽입된 환형관에서의 유동과 대류 열전달 특성을 실험적 연구를 수행하여 분석하고 heat sink로서의 실현 가능성을 검토하였다. 다른 기공밀도를 갖는 두 종류의 발포 알루미늄을 사용하여 유동과 열전달 특성을 파악하고 마찰계수와 열전달 관련 Nusselt수를 Darcy 수, Reynolds수, Prandtl수의 함수로 상관식을 구하였다. 발포 알루미늄이 없는 경우에 비해 마찰계수는 증가하지만 Nusselt수에서도 6에서 10배의 증가를 나타낸다. 따라서 열교환기의 크기가 제한되는 경우 열교환기에 발포알루미늄을 삽입하면 전열면적을 감소시킬 수 있으므로 열교환기를 소형화할 수 있다.

Magnetic Core Reactor for DC Reactor type Three-Phase Fault Current Limiter

  • Kim, Jin-Sa;Bae, Duck-Kweon
    • International Journal of Safety
    • /
    • 제7권2호
    • /
    • pp.7-11
    • /
    • 2008
  • In this paper, a Magnetic Core Reactor (MCR) which forms a part of the DC reactor type three-phase high-Tc superconducting fault current limiter (SFCL) has been developed. This SFCL is more economical than other types with three coils since it uses only one high-Tc superconducting (HTS) coil. When DC reactor type three-phase high-Tc SFCL is developed using just one coil, fewer power electronic devices and shorter HTS wire are needed. The SFCL proposed in this paper needs a power-linking device to connect the SFCL to the power system. The design concept for this device was sprang from the fact that the magnetic energy could be changed into the electrical energy and vice versa. Ferromagnetic material is used as a path of magnetic flux. When high-Tc superconducting DC reactor is separated from the power system by using SCRs, this device also limits fault current until the circuit breaker is opened. The device mentioned above was named Magnetic Core Reactor (MCR). MCR was designed to minimize the voltage drop and total losses. Majority of the design parameters was tuned through experiments with the design prototype. In the experiment, the current density of winding conductor was found to be $1.3\;A/mm^2$, voltage drop across MCR was 20 V and total losses on normal state was 1.3 kW.

Bullet Train of Giant Nonlinear Internal Waves from Luzon Strait

  • Liu, Cho-Teng;Hsu, Ming-Kuang;Chen, Hsien-Wen;Wang, Dee-Way;Chyou, Yuan-Jie;Lee, Chang-Wei
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume II
    • /
    • pp.934-937
    • /
    • 2006
  • In the northeastern South China Sea (SCS), fast westward moving (about 2.9 m/s) non-linear internal waves (NLIWs) are emanated nearly daily from the Luzon Strait. Their propagation speed is faster than NLIWs previously observed in the deep water of world oceans, their amplitude of 140 m or more is the largest free propagating NLIWs so far observed in the deep ocean. These NLIWs energized the top 1500 m of the water column, heaving it up and down in 20 min. Their associated energy density and energy flux are the largest observed to date. During 2005 and 2006 experiment, they were found west of the HengChun Ridge (HCR) that links Luzon and Taiwan Islands. This coincides with founding in satellite images, no NLIW front was found east of HCR. But, the turbulent environment east of HCR may prohibit surface signature of NLIWs that were emanated from sills between Batan Islands. The relative contribution of the two ridges on NLIW in Luzon Strait is still under study.

  • PDF

에어로졸 증착법[aerosol depostion method]에 의한 $Ba[Ce_{0.9}Y_{0.1}]O_{3-\delta}$ - Ni 수소분리막 제조 ($Ba[Ce_{0.9}Y_{0.1}]O_{3-\delta}$ - Ni Composite Membrane for Hydrogen Separation by Aerosol Deposition Method)

  • 박영수;변명섭;최진섭;김진호;황광택
    • 한국수소및신에너지학회논문집
    • /
    • 제21권2호
    • /
    • pp.117-122
    • /
    • 2010
  • BCY($Ba(Ce_{0.9}Y_{0.1})O_{3-\delta}$) oxide, shows high protonic conductivity at high temperatures, and are referred to as hydrogen separation membrane. For high efficiency of hydrogen separation ($H_2$ flux and selectivity) and low fabrication cost, ultimate thin and dense BCY-Ni layer have to be coated on a porous substrate such as $ZrO_2$. Aerosol depostion (AD) process is a novel technique to grow ceramic film with high density and nano-crystal structure at room-temperature, and would be applied to the fabrication process of AD integration ceramic layer effectively. XRD and SEM measurements were conducted in order to analyze the characteristics of BCY-Ni membrane fabricated by AD process.

Effect of Exchangeable Cation on Radionuclide Diffusion In Compacted Bentonite

  • Park, Jong-Won;Park, Hyun-Soo;Dennis W. Oscarson
    • Nuclear Engineering and Technology
    • /
    • 제28권3호
    • /
    • pp.274-279
    • /
    • 1996
  • Diffusion coefficient is a critical parameter for predicting radiological source term(migration rate and flux of radionuclide) through given near field conditions in spent fuel or high level waste repository. The effect of exchangeable cation-$Na^+$ and $Ca^{2+} - on the diffusion of $I^- \;and^3H$ (as HTO) in compacted bentonite was examined using a through-diffusion method. Bentonite material used here was compacted to a density of 1.3 Mg/m$^3$, and Na-bentonite was saturated with a solution of 100 mol NaCl/m$^3$ and Ca-bentonite with 50 $mol\;CaCl_2$/m$^3$. The results show that effective diffusion coefficients are generally higher by a factor of two to five in Ca-than Na-clay. This is attributed to the larger particle size of Ca-compared to Na-bentonite; hence, Ca-bentonite has a greater proportion of relatively large pores, which make a greater contribution to mass transport than small pores. Although the nature of the exchangeable cation affects mass diffusion in compacted bentonite, the effect is small and not likely to influence performance assessment modeling of compacted bentonite-based barriers.

  • PDF