• Bulletin of the Korean Chemical Society
• /
• v.30 no.1
• /
• pp.53-56
• /
• 2009

At room-temperature, a facile, seedless, and environmentally benign green route for the synthesis of star like PbS nanoclusters at 7 min in aqueous solution of 1-ethyl-3-methylimidazolium ethyl sulfate, [EMIM] [$EtSO_{4}$], room-temperature ionic liquid (RTIL), via ultrasonic irradiation is proposed. The X-ray diffraction studies display that the products are excellently crystallized in the form of cubic structure. An energy dispersive X-ray spectroscopy (EDX) investigation reveals the products are extremely pure. The absorption spectra of the product exhibit band gap energy of about 4.27 eV which shows an enormous blue shift of 3.86 eV that can be attributed to very small size of PbS nanoparticles produced and quantum confinement effect. A possible formation mechanism of the PbS nanoparticles using ultrasonic irradiation in aqueous solution of the RTIL is presented.

• Journal of dental hygiene science
• /
• v.13 no.2
• /
• pp.203-212
• /
• 2013

The tooth morphology and qualitative mineral contents on enamel surface using energy dispersive X-ray spectroscopy, (EDX) were examined in the white-toothed shrew (genus Crocidura ) Crocidura lasiura and C. suaveolens and the red-toothed shrew (genus Sorex) Sorex caecutiens. In the case of C. lasiura and C. suaveolens, dental formula was found I 3/1 C1/1 P1/1 M3/3=28. The upper 1st and 2nd molars had an unequal W-shape formed by 5 cusps on the crown. The 3rd molar was found one-third the size of those of 1st and 2nd molars. The upper 1st incisor had two different sized hook-shapes and the lower 1st incisor was even. In the case of S. caecutiens, dental formula was found to be I3/1 C1/1 P3/1 M3/3=32. The upper 1st and 2nd molars had an equal W-shape on crown. The upper 3rd molar was half the size of those of the other molars. The upper 1st incisor possessed two similar sized hook-shapes and the lower 1st incisor had an uneven and serrated form. A comparison with the dental and cranial measurements revealed C. lasiura to be the largest of the three species (p<0.001) and C. suaveolens and S. caecutiens were similar in size (p>0.05). A qualitative analysis of mineral contents on enamel surface of the lower 1st incisor and lower 1st molar using EDX revealed C, O, P, Ca and Cu in all specimens and Pb was detected in several enamel specimens. No significant differences in the mineral contents (% weight) were observed among the three species (p>0.05). Fe was only detected on enamel surface of S. caecutiens with red pigmented teeth. Therefore, Fe is responsible for the red tip of the teeth. These results suggest that tooth morphological characteristics including the color of the tooth tip might be used as the key classifying species belonging to Crocidura and Sorex.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.295-295
• /
• 2010

Nanoparticles of the compound semiconductor, Cu(In, Ga)Se2 (CIGS), were synthesized in solution under ambient pressure below $100^{\circ}C$ and characterized by powder X-ray diffraction (XRD), scanning electron microscopy (SEM), optical absorption spectroscopy and energy-dispersive X-ray (EDX) analyses. These materials have chalcopyrite crystal structures and the particle sizes less than 100 nm. Synthetic conditions were studied for the crystallized CIGS nanoparticles formation to prevent from side products of Cu2Se, Cu2-xSe, and CuSe etc. The single phase CIGS nanoparticles were applied to coating of thin films photovoltaic cells. The electro deposition of CIGS thin films is also a good non-vacuum technology and under investigation. In aqueous solutions, the different chemical compositions of CIGS thin films were obtained, depending on pH, concentration of starting materials and deposition potentials. The surface morphology of the prepared CIGS thin films depends on the complexing ligands to the solutions during the electrochemical deposition.

• Korean Journal of Metals and Materials
• /
• v.48 no.7
• /
• pp.674-682
• /
• 2010

Fe-fullerene/$TiO_2$ composite photocatalysts were prepared with titanium (IV) n-butoxide (TNB) by a sol-gel method. The samples were characterized by scanning electron microscopy (SEM), Transmission electron microscope (TEM), specific surface area (BET), X-ray diffraction analysis (XRD) and energy dispersive X-ray spectroscopy (EDX). The photocatalytic activities were evaluated by the photocatalytic degradation of methylene blue (MB) solution. XRD patterns of the composites showed that the Fe-fullerene/$TiO_2$ composite contained a typical single and clear anatase phase. The surface properties shown by SEM present a characterization of the texture on Fe-fullerene/$TiO_2$ composites and showed a homogenous composition in the particles for the titanium sources used. The EDX spectra for the elemental identification showed the presence of C and Ti with strong Fe peaks for the Fe-fullerene/$TiO_2$ composite. From the photocatalytic results, the excellent activity of the Fe-fullerene/$TiO_2$ composites for degradation of methylene blue under UV light irradiation could be attributed to both the effects between photocatalytic reaction of the supported $TiO_2$, decomposition of the organometallic reaction by the Fe compound and energy transfer effects such as electron and light of the fullerene.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.423-423
• /
• 2008

One dimensional (1D) nanostructures, including nanowires, nanorods, nanobelts, and nanotubes, have been the focus of current research on nanotechnology because of their fundamental significance in chemistry, physics, materials science and engineering, and potential applications in nanoelectronics. We have synthesized Te-rich $Sb_xTe_{1-x}$ nanowires and nanotubes via thermal evaporation method under vapor-solid mechanism. The physical morphology and chemical composition of the fabricated nanowires and nanotubes were investigated by scanning electron microscopy (SEM), transmission electron microscopy (TEM), and energy dispersive X-ray spectroscopy (EDX).

• Transactions on Electrical and Electronic Materials
• /
• v.12 no.2
• /
• pp.76-79
• /
• 2011

In order to improve efficiency and make a new material thin film, we prepared the Al-In-Sn-ZnO thin film on a glass substrate at room temperature using a Facing Target Sputtering (FTS) system. The FTS system was designed to array two targets that face each other. Two different kinds of targets were installed on the FTS system. We used an ITO ($In_2O_3$ 90wt%, $SnO_2$ 10wt%) target and an AZO (ZnO 98wt%, $Al_2O_3$ 2wt%) target. The AIZTO films were deposited using different applied powers to the targets. The as-deposited AIZTO thin films were investigated using a UV/VIS spectrometer, an X-ray diffratometer (XRD), and Energy Dispersive X-ray spectroscopy (EDX).

• Journal of the Korean Ceramic Society
• /
• v.47 no.4
• /
• pp.269-275
• /
• 2010

In this study, we successfully prepared CNT/$TiO_2$, Pt/CNT and Pt/CNT/$TiO_2$ composites and investigated their photocatalytic activity in MB solution by irradiation under UV light. Fourier transform infrared (FT-IR) spectroscopy was used to characterize the functional group on the surface of MWCNTs, which oxidized by MCPBA. Brunauer-Emmett-Teller (BET) surface area, transmission electron microscopy (TEM), X-ray diffraction (XRD) and energy dispersive X-ray (EDX) were used to analyze the prepared composites. The results of the decomposition of the MB solution indicated that the Pt/CNT/$TiO_2$ composite had the best photocatalytic activity among the three kinds of composites.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.252-252
• /
• 2010

AIZTO (Al-In-Sn-ZnO) thin film was deposited on glass substrate at room temperature by facing target sputtering (FTS) system. The FTS system was designed to array two targets facing each other. Two different kinds of targets were installed on FTS system. We used the ITO (In2O3 90wt%, SnO2 10wt%) target and the AZO (ZnO 98wt%, Al2O3 2wt%). AIZTO films were deposited in each of the applied power of the targets. The electrical and structural properties of the as-deposited AIZTO thin films were then examined by hall-effect measurement, and by using atomic force microscope (AFM), X-ray diffractometer (XRD), and energy dispersive x-ray spectroscopy (EDX). The optical property was measured by an UV-VIS spectrometer.

• Journal of Magnetics
• /
• v.22 no.1
• /
• pp.100-103
• /
• 2017

We studied the microstructure and magnetic properties of Fe nanosized powder synthesized by the pulsed wire evaporation method. The x-ray diffraction spectrum confirmed that this powder had a pure ${\alpha}$-Fe phase. Scanning electron microscope and transmission electron microscope measurements indicated that the prepared powder had uniform spherical shape with core-shell structure. The mean powder size was about 35 nm and the thickness of the surface passivation layer was about 5 nm. Energy dispersive X-ray spectroscopy measurement indicated that the surface passivation layer was iron oxide. Magnetic field dependent magnetization measurement at room temperature showed that the maximum magnetization of the prepared powder was 177.1 emu/g at 1 T.

• Tribology and Lubricants
• /
• v.25 no.1
• /
• pp.66-72
• /
• 2009

Al-based composites reinforced with SiC particulate were fabricated using a thermal spray process, and dry sliding wear behavior of the composites was investigated. Pre-mixed Al and SiC powders were sprayed on an A16061 substrate by flame spraying, and dry sliding wear test were performed under various sliding speed and applied load conditions against ${Al_2}{O_3}$ ball. Wear behavior of the composites was studied by using scanning electron microscope (SEM), energy dispersive X-ray spectroscopy (EDX) and X-ray diffraction (XRD). And build-up mechanism of MML on the worn surface of the composites was examined. It was revealed that these MML was formed of debris from the contact surface of the composites and effected to wear behavior of the composites protecting the contact surface of the composites.