• Journal of Korean Physical Therapy Science
• /
• v.15 no.1
• /
• pp.21-28
• /
• 2008

The purposes of this study are to quantify energy expenditure by measuring oxygen consumption while performing occupational therapy activities most commonly used for adult hemiplegia patients, to recommend a optimal dosage of exercise by comparing energy expenditure according to the recovery stage, and to suggest a precaution in the treatment of patients with cardiac disorders. According to Brunnstrom recovery stages in hand function, subjects were allocated to group I(3rd and 4th Brunnstrom recovery stages) and group II(5th and 6th Brunnstrom recovery stages). Outcome measures included oxygen consumption, energy expenditure rate, and heart rate during each activity and in recovery period after the activity. Occupational activities including sanding activity, putty activity, and skateboard activity were carried out for all patients. In sanding and putty activities, there were significant differences of oxygen consumption and energy expenditure during the activity between groupⅠandⅡ(p<0.05), but there were not significant differences of oxygen consumption, energy expenditure and heart rate in the recovery period(p>0.05). In skateboard activity, there were no significant differences in oxygen consumption, energy expenditure and heart rates between the two groups during the activity and in the recovery period(p>0.05). The findings indicates that cardiovascular demands for basic activities usually peformed for a treatment may be depended on the physical recovery of patients with hemiplegia. Therefore, therapeutic activities for patients should be selected with the great care.

• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.15 no.4
• /
• pp.39-45
• /
• 2019

The operational conditions such as cooling tower water pump flow rate, cooling tower fan flow rate, and chiller capacity in heat source equipment, and supply air temperature and chilled water temperature in air conditioner are considered to study the effects on energy consumption for central cooling system by using TRNSYS program. As a result, the optimal values of supply air temperature and chilled water temperature for minimal total energy consumption are 12℃ and 8℃. And if maximum values of cooling tower water pump and fan flow rate is decreased from 100% to 40%, energy consumptions are increased 170MJ/day and 63.2MJ/day, respectively.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.46 no.4
• /
• pp.487-494
• /
• 2010

In order to test the applicability of bunker-A in a diesel engine for small-fishing boat, the investigation of the engine performance and the exhaust emission was performed under various conditions of fuel property, intake air pressure and fuel temperature. It was also performed based on IMO NOx Technical code. At high load, the energy consumption rate of bunker-A was lower than that of diesel oil, and the characteristics of exhaust emission of bunker-A were similar to those, and NOx emission rates of both fuels satisfied the IMO NOx emission regulation limits. The energy consumption rate and characteristics of exhaust emission were improved as the intake air pressure was increased, but these were not improved remarkably as the temperature of bunker-A was heated. However, at low load the energy consumption rate, CO emission rate and HC emission rate of bunker-A were higher than those of diesel oil, but NOx emission rates of the fuels were about the same. In addition, at low load the energy consumption rate and CO emission rate of bunker-A were increased as the intake air pressure and the temperature were higher than normal conditions. Accordingly, it is thought that the use of bunker-A in a kind of test engine is possible at high load. On the other hand, it is thought that more research is needed to improve the combustion efficiency under low temperature and low load condition.

• Journal of Institute of Convergence Technology
• /
• v.3 no.2
• /
• pp.57-60
• /
• 2013

The purpose of this study is to analysis of how to calculate fuel efficiency in major development countries (U.S. and Europe) and energy consumption formular derivation of domestic CNG fuel and prove by vehicle test. The formula of fuel consumption is different in mpg(mile per gallon), l/100km, and km/l each countries. CNG fuel has a significant impact on fuel density, composition, and Hydro-Carbon ratio. So, this study how to measurement and calculation procedures of CNG gaseous fueled vehicle energy consumption rate.

• Journal of Korean Society on Water Environment
• /
• v.32 no.3
• /
• pp.253-260
• /
• 2016

To reduce energy consumption in wastewater treatment plants (WWTPs), renewable energy applications such as small hydropower, solar energy, and wind energy are popular. However, it should be noticed that energy originated from operation of wastewater treatment process can be reduced through optimized operation based on analysis of factors affecting energy. In this research, the relationship to the various operational variables and influent factors was explored using correlation analysis and decision tree algorithm. Due to the non-linear characteristics of the process, it was difficult to find clear linear patterns through correlation analysis. However, decision tree algorithm showed its usefulness in uncovering hidden patterns that consume energy. As operational factors, influent flowrate, the amount of aeration, nitrate recycling pumping rate, and sludge wasting pumping rate were selected as important factors. For environmental factors associated with influent compositions and removal rate, BOD and T-N removal rate were selected as significant factors.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.3
• /
• pp.1266-1273
• /
• 2013

The purpose of this study was to analysis the effect of form of outsole - complex function double rocker sole(CDR) vs. negative-heel rocker sole (NR) - on energy consumption and heart rate intensity during gait. 11 women, who had no medical history on musculoskeletal disease and surgery within 3 years prior to study, were participated. The walking energy cost per time (WECt) during 35minutes, heart rate intensity, and total calorie consumption were compared by using pair t-test. The WECt and total calorie consumption were found to be significantly higher(p<.05) in CDR than NR. However, there was no difference in HRi. Based on the present study, CDR shoe may have significant implications in shoe prescription for people who want to increase energy consumption.

• Journal of the Ergonomics Society of Korea
• /
• v.4 no.2
• /
• pp.25-31
• /
• 1985

Mechanical energy consumption during human running was studied. The subject was modeled by an eleven segment planar open linkage system and analyzed by Newtonian equations of motion from film data with a sampling rate of 50 Hz. The motion data from films were smoothed by lower 7 harmonics before analysis. And this study was tried for a normal male subject running on a concrete floor. The mechanical energy consumption was evaluated from the five different criteria suggested by others and a joint energy consumption criterion newly devised based on the muscle contraction.

• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.537-539
• /
• 2015

considerate operation is a major issue in the equipment-intensive operation. Identifying an optimal equipment combination is important to achieve low-energy operations. An Earthwork operation planning system, which measures the energy consumption of construction operations by taking into account construction equipments' engineering attributes (e.g., weight, capacity, energy consumption rate, etc.) and operation conditions (e.g., road condition, attributes of materials to be moved, geometric information, etc.), is essential to achieve the low-energy consumption. This study develops an automated computerized system which identifies an optimal earthmoving equipment fleet minimizing the energy consumption. The system imports a standard template of earthmoving operation model and compares numerous scenarios using alternative equipment allocation plans. It finds the fleet that minimizes the energy consumption by enumerating all cases using sensitivity analysis. A case study is presented to verify the validity of the system.

• Journal of Korean Physical Therapy Science
• /
• v.15 no.1
• /
• pp.39-45
• /
• 2008

This study was undertaken to identify the influence which affect on gait speed and energy consumption regarding putting on arm sling during gait of the 40 hemiplegic patients selected from University Hospital and rehabilitation center in seoul during two months. The analysis of data was performed using the paired samples ttest to compare the differences of gait velocity, heart rate, oxygen consumption and oxygen cost in gait of preand post－ arm sling. The results of this study were as follows; 1. When comparing the result before putting on arm sling in the gait of hemiplegic patient, gait velocity after putting on arm sling was statistically significantly increased(p<.05). 2. When comparing the result before putting on arm sling in the gait of hemiplegic patient, heart rate after putting on arm sling was statistically significantly decreased(p<.05). 3. When comparing the result before putting on arm sling in the gait of hemiplegic patient, oxygen consumption per weight after putting on arm sling was statistically significantly decreased(p<.05). 4. When comparing the result before putting on arm sling in the gait of hemiplegic patient, oxygen consumption rate per weight after putting on arm sling was statistically significantly decreased(p<.05). When putting together the above result, the gait with arm sling in comparison with the gait without arm sling was to increase gait velocity, decrease heart rate, decrease oxygen consumption and was finally to decrease energy consumption in the gait of hemiplegic patient.

• The Korean Journal of Food & Health Convergence
• /
• v.7 no.6
• /
• pp.17-24
• /
• 2021

This study investigates the exercise-physiological changes in stages through the movement of the automatic stepper and to analyze the usefulness of the automatic stepper. For 18 male university students, out of 10 levels, 5 level and 10 level of automatic stepper exercise were performed. At each 10, 20, 30 minutes during exercise, 5 and 10 minutes after exercise stop the subjects were examined to analyze the changes in energy consumption after minutes, respiratory exchange rate, heart rate, oxygen consumption per body weight, METs, cumulative energy consumption, and lactic acid to verify the usefulness of the automatic stepper. The mean and standard deviation were calculated using the SPSS, and one-way ANOVA with repeated measure was performed to verify the difference in the mean between time periods. The LSD method was used for the post-hoc test, and the significance level was set to α = .05. There were no significant changes in both 5 and 10 level, but the cumulative energy consumption over time increased significantly. In addition, as a low-intensity exercise intensity is shown, a low increase in lactic acid indicated a safe exercise level. In future studies, in-depth studies of various variables through regular exercise programs are needed for those who need safe exercise.