• Clean Technology
• /
• v.23 no.3
• /
• pp.237-247
• /
• 2017

In the dimethyl ether (DME) synthesis and separation process, over 8% by mole of $CO_2$ is fed to the DME synthesis reactor which lowers DME productivity. Therefore, this work focused on the removal of $CO_2$ using three kinds of processes with physical absorbents by comparing the utility consumption through computer simulation of each process. Among the processes selected for comparison are Rectisol$^{(R)}$ process using methanol, Purisol$^{(R)}$ process using n-methyl pyrrolidone (NMP), and SelexolTM process using dimethyl ethers of polyethylene glycol (DEPG) as a solvent. As a result of this study, it was concluded that Purisol$^{(R)}$ process consumes the least energy followed by SelexolTM process. Therefore, it is considered that Purisol$^{(R)}$ process is the most suitable method to absorb $CO_2$ contained in the feed of DME synthesis reactor.

• Membrane Journal
• /
• v.24 no.1
• /
• pp.31-38
• /
• 2014

Rainwater harvesting is a process by which rainwater collected from rooftop or other catchment is purified so that the water can be directly or indirectly used by human beings for beneficial uses. As rainwater is increasingly considered for high quality purposes, membranes have gained an important place in rainwater treatment. It has advantages such as the production of high quality water, small footprint, and affordable energy consumption. Nevertheless, membrane fouling is regarded as a serious problem similar to the cases of water treatment and wastewater reclamation. In this study, we applied microfiltration (MF) membranes for rainwater treatment. In addition, a low pressure ultraviolet (UV) process was also use as a pretreatment to control notonly. To quantify the effect of UV on organic matters, both total organic carbon (TOC) and UV absorbance (UVA) were measured. Moreover, the effect of UV pretreatment on membrane fouling was investigated. Experimental results indicated that the pretreatment of membranes using LPUV was effective to control fouling of MF membranes only when the rainwater was contaminated by algae. This was attributed the reduction and modification of organics after UV treatments. It is likely that the UV/MF process is a promising option for water treatment in decentralized water treatment such as micro water grid systems.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.26 no.5
• /
• pp.335-342
• /
• 2013

Since the seriousness of environmental pollution came to the fore recently, various efforts have been made globally for the reduction of the environmental load. In particular, in the field of construction, an industry responsible for a considerable amount of pollution, studies have been actively conducted to reduce $CO_2$ emissions and energy consumption. However, most conventional research about pollution as it relates to construction is focused on the maintenance stages where $CO_2$ emissions are the greatest. Research related to the design stage is in its infancy, as it has only been conducted thus far on steel buildings and RC buildings. In fact, in order to achieve environmentally friendly construction considering the Life Cycle Assessment(LCA), the building design should be derived to reduce the $CO_2$ emissions from the early building design stage, and structural engineers should be able to suggest a design plan considering its environmental friendliness. In this study, optimal structural design method for steel reinforced concrete(SRC) columns considering $CO_2$ emissions is presented. The trends of $CO_2$ emissions in SRC columns according to the variations of steel shapes, concrete strengths and loads are investigated.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.16 no.6
• /
• pp.683-690
• /
• 2006

Reducing power consumption to extend network lifetime is one of the most important challenges in designing wireless sensor networks. One promising approach to conserving system energy is to keep only a minimal number of sensors active and put others into low-powered sleep mode, while the active sensors can maintain a connected covet set for the target area. The problem of computing such minimum working sensor set is NP-hard. In this paper, a centralized Voronoi tessellation (CVT) based approximate algorithm is proposed to construct the near optimal cover set. When sensor's communication radius is at least twice of its sensing radius, the covet set is connected at the same time; In case of sensor's communication radius is smaller than twice of its sensing radius, a connection scheme is proposed to calculate the assistant nodes needed for constructing the connectivity of the cover set. Finally, the performance of the proposed algorithm is evaluated through theoretical analysis and extensive numerical experiments. Experimental results show that the proposed algorithm outperforms the greedy algorithm in terms of the runtime and the size of the constructed connected cover set.

• Journal of the Korean Society for Railway
• /
• v.15 no.4
• /
• pp.408-412
• /
• 2012

Recently, new climate change mechanism after 2020 year has been accepted with the parties, and so government is pushing ahead the GHG reduction policies to achieve the effective results. Especially, it is essential to enhance the role of railroad in the public traffic system as well as to develop new cars with high energy efficiency for the GHG reduction of transportation sector. Thus, the calculation method of GHG emission of railroad should be established to manage the emission continuously. In this study, the calculation method of GHG emission of railroad was defined with Tier level considering its emission sources to refer to 2006 IPCC guideline for national GHG inventories. Also, the GHG emission of railroad at Tier 1 level was investigated using the activity data related to the amount of diesel and electricity consumption from 2008 to 2010. As a result, total GHG emission in 2010 was about 2,060 thousands ton CO2e, which have 73% of electricity and 27% of diesel. In future, the plans on the GHG reduction of railroad will be accomplished by the analysis of the detailed trends on the basis of the emission management of Tier 3 level under operating patterns. Therefore, it is important to develop the specific GHG emission factors of railroad in advance.

• Journal of KIISE:Information Networking
• /
• v.34 no.6
• /
• pp.475-482
• /
• 2007

Mobile nodes in ad-hoc wireless networks play roles of router as well as host. Movement of nodes causes network topology changes, which make existing routing information be modified. Therefore many routing protocols for ad-hoc networks were suggested in the literature. In this paper, we suggest an enhanced automatic route shortening method for dynamic source routing(DSR) protocol. DSR is a request/response based protocol which has low routing overhead owing to node movement. The current automatic route shortening is performed on the only nodes which belong to the source route of packets. On the contrary, our suggested method allows all neighbor nodes hearing the packet to participate in automatic route shortening. It makes all possible route shortenings be performed. So we maintain maximal shortened routes of ongoing data connections. Simulation results with ns2 show that our method pays small extra protocol overhead for ARS, but increases the ratio of successful packet transmissions and the number of ARSs performed in our mechanism is from 2 to 5 times higher than in original ARS mechanism and therefore it will improve the network-wide energy consumption in wireless ad-hoc networks.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.22 no.1
• /
• pp.108-113
• /
• 2012

Routing paths are mightily important for the network security in WSNs. To maintain such routing paths, sustained path re-selection and path management are needed. Region segmentation based path selection method (RSPSM) provides a path selection method that a sensor network is divided into several subregions, so that the regional path selection and path management are available. Therefore, RSPSM can reduce energy consumption when the path re-selection process is executed. However, it is hard to guarantee optimized secure routing path at all times since the information using the path re-selection process is limited in scope. In this paper, we propose partial path selection method in each subregion using preselected partial paths made by RSPSM for routing path optimization in SEF based sensor networks. In the proposed method, the base station collects the information of the all partial paths from every subregion and then, evaluates all the candidates that can be the optimized routing path for each node using a evaluation function. After the evaluation process is done, the result is sent to each super DN using the global routing path information (GPI) message. Thus, each super DN provides the optimized secure routing paths using the GPI. We show the effectiveness of the proposed method via the simulation results. We expect that our method can be useful for the improvement of RSPSM.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.14 no.12
• /
• pp.1102-1139
• /
• 2002

A review on the papers published in the Korean Journal of Air-Conditioning and Refrigerating Engineering in 2000 and 2001 has been done. Focus has been put on current status of research in the aspect of heating, cooling, ventilation, sanitation and building environment. The conclusions are as follows. (1) Most of fundamental studies on fluid flow were related with heat transportation of facilities. Drop formation and rivulet flow on solid surfaces were interesting topics related with condensation augmentation. Research on micro environment considering flow, heat, humidity was also interesting for comfortable living environment. It can be extended considering biological aspects. Development of fans and blowers of high performance and low noise were continuing topics. Well developed CFD technologies were widely applied for developing facilities and their systems. (2) Most of papers related with heat transfer analysis and heat exchanger shows dealt with convection, evaporation, and channel flow for the design application of heat exchanger. The numerical heat transfer simulation studies have been peformed and reported to show heat transfer characteristics. Experimental as well as numerical studies on heat exchanger were reported, while not many papers are available for the system analysis including heat exchanger. (3) A review of the recent studies on heat pump system shows that performance analysis and control of heat pump have been peformed by various simulations and experiments. The research papers on multi-type heat pump system increased significantly. The studies on heat pipe have been examined experimently for change of working characteristics and strut lure. Research on the phase change has been carried out steadily and operation strategies of encapsulated ice storage tank are reported experimentally in several papers. (4) A review of recent studies on refrigeration/air conditioning system have focused on the system performance and efficiency for new alternative refrigerants. Evaporation and condensation heat transfer characteristics are investigated for tube shapes and new alternative refrigerants. Studies on components of refrigeration/air conditioning system are carried to examine efficiency for various compressors and performance of new expansion devices. In addition to thermophysical properties of refrigerant mixtures, studies on new refrigerants are also carried out, however research works on two-phase flow seemed to be insufficient. (5) A review of the recent studies on absorption cooling system indicates that heat and mass transfer phenomena have been investigated to improve absorber performance. Various experimental data have been presented and several simulation models have been proposed. A review of the recent studies on duct and ventilation shows that ventilation indices have been proposed to quantify the ventilation performance in buildings and tunnels. Main efforts have been focused on the applications of ventilation effectiveness in practice, either numerically using computational fluid dynamics or experimentally using tracer gas techniques. (6) Based on a review of recent studies on indoor thermal environment and building service systems, research issues have mainly focused on many innovative ideas such as underfloor air-conditioning system, personal environmental modules, radiant floor cooling and etc. Also, the new approaches for minimizing energy consumption as well as improving indoor environmental conditions through predictive control of HVAC systems, various activities of building energy management and cost-benefit analysis for economic evaluation were highlighted.

• Journal of Nutrition and Health
• /
• v.50 no.4
• /
• pp.336-349
• /
• 2017

Purpose: The purposes of this study were to describe changes in weight, waist circumference (WC), and prevalence of obesity over 8 years as well as investigate demographic and dietary factors associated with weight gain in Korean adults. Methods: The Korean Genome and Epidemiology Study is an ongoing community-based longitudinal study, which was started in 2001~2002 and repeated every 2 years. Height, weight, and WC were measured, and demographic data and food intake information using the food frequency questionnaire were collected from 10,038 adults aged 40~69 years at baseline. Among those individuals, 3,506 healthy individuals without chronic diseases completed the 4th follow-up survey in 2009~2010. Results: Mean weight decreased by 0.35 kg and 0.65 kg in men and women, respectively, whereas mean WC increased by 1.71 cm and 1.85 cm during the 8-year period. Prevalence of obesity based on body mass index (BMI) decreased from 34.5% to 33.5% in men and from 38.0% to 36.7% in women, whereas abdominal obesity increased from 14.8% to 22.2% in men and from 28.8% to 35.4% in women. Weight change was associated with age and smoking status in men, and residence area, age, education, income, and alcohol drinking in women. Approximately 57.5% maintained their BMI over 8 years (<${\pm}1kg/m^2$, stable weight group), 19.5% showed a BMI increase of ${\geq}1kg/m^2$ (weight gain group), and 23.0% showed a BMI decrease of more than $1kg/m^2$ (weight loss group). There was no significant difference in energy intake calculated as the percentage of estimated energy requirements among the three weight change groups. Intakes of coffee mix and milk were significantly higher in the weight gain group than in the weight loss group in men after controlling for confounding factors. Conclusion: Our results show that higher consumption of coffee mix and milk was associated with weight gain in Korean healthy men.

• Journal of Nutrition and Health
• /
• v.41 no.8
• /
• pp.818-831
• /
• 2008

The purpose of this study was to investigate the dietary behavior, health-related lifestyles and nutrient intake status of college students according to physical activity levels. The physical activity levels were measured using the Korean version of the International Physical Activity Questionnaire (IPAQ) short form. The subjects of this study were 438 college students (243 males and 195 females) in Incheon area and were divided by gender and by physical activity levels, which included low, moderate and high physical activity groups. The average age of male and female students were 23.7 and 21.0 years old, respectively. The prevalence of the low physical activity group was 11.5% for males and 30.8% for females and that of the high physical activity group was 38.7% for males and 22.6% for females. According to the criteria for obesity in Asia-Pacific region, 39.1% of the males and 64.1% of the female students investigated were in the normal range of BMI and 30.9% of the males and 4.6% of the female students were in the obesity category. However, percent of body fat in the female students was significantly higher than that of the male students. The soft lean mass of the high physical activity group was higher compared to the other groups. In the low physical activity group, frequency of “eating out” was lower compared to the other groups. The average consumption of energy was 74.4% for males and 80.1% for females of the estimated energy requirement (EER). The mean intakes of vitamin C, vitamin B2, folic acid and Ca were 67.3%, 84%, 52.7% and 36.7% for males and 64.8%, 99.9%, 51.1% and 40.1% for females of recommended intake (RI), respectively. Therefore, it was necessary for obesity prevention as well as health promotion to increase physical activity and to eat an adequate, balanced diet in female college students.