• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.169.1-169.1
• /
• 2010

Geothermal heat pump(GHP)system has been extensively disseminated due to the recent increasing demand over new and renewable energy. However, the economics and system reliability has been key issues and barriers to insure a better system performance as designed originally. The building integrated designs of geothermal heat pump system are test and optimize GHP system by evaluating its performance in virtual reality. System design is an iterative process that will help optimize the cost efficiency of the system. One of the primary goals is to minimize the energy imbalance between the amount of energy extracted from the ground and the energy reject to it. This will reduce the land area required to install the GHX, reduce the cost of installing it and ensure the long-term efficiency of the system. Commissioning is the process of ensuring that are designed, installed, functionally tested, and capable of being operated and maintained to performance in conformity with design intent. In this paper, Study on introduction of Initial commissioning method of Geothermal Heat Pump(GHP) system using ISO performance data has been introduced. Also KIER GHP Simulator is used to simulate actual heat pimp operating condition and test commissioning method. Result should that the experiment data base could verify the applicability of the commissioning method, and also were able to suggest a better ways to GHP commissioning.

• 전력전자학회논문지
• /
• 제18권1호
• /
• pp.63-71
• /
• 2013

This paper describes the coordinated droop control method for stand-alone type DC micro-grid to improve reliability and utilization of distributed generations and energy storage. The stand-alone type DC micro-grid consists of several distributed generations such as a wind power generation, solar power and micro-turbine, and energy storage. The proposed method which is based on autonomous control method shows high reliability and stability through coordinated droop control of distributed generations and energy storage and also capability of battery management. The operation of stand-alone type DC micro-grid was analyzed using detail simulation model with PSCAD/EMTDC software. Based on simulation results, a hardware simulator was built and tested with commercially available components and performance of system was verified.

• Journal of Power Electronics
• /
• 제14권2호
• /
• pp.402-412
• /
• 2014

This paper proposes a novel electric propulsion system for naval ships, which consists of Active Front End (AFE) converters directly connected to battery Energy Storage Modules (ESMs). Employing the proposed AFE converters with ESMs in the power systems of naval ships can enhance the reliability and quality of the electric power. Furthermore, the fuel-efficiency of the generator can be improved by a higher loading factor of the generator and its prime movers. The proposed AFE configuration does not require an additional dedicated DC/AC converter for the ESMs. Instead of that, the AFE converter itself can control the DC link voltage and the discharging and/or charging of the ESMs. A control scheme to achieve these control objectives is also presented in this paper. The overall power system, including the generators and electrical loads of a naval ship, is implemented by a small scaled Power Hardware-In-the-Loop (PHIL) simulator. Through this experimental setup, the proposed system configuration and the power control strategies are verified. It is shown that the fuel-efficiency and transient dynamics can be improved in the normal and contingency operation modes.

• Journal of Power Electronics
• /
• 제3권1호
• /
• pp.62-67
• /
• 2003

Recently, photovoltaic system has been studied widely as a renewable energy system, because it does not produce environmental pollution and it has infinity energy source from the sun. A study on photovoltaic system has a lot of problems like as reappearance and repetition of some situation in the laboratory experiment for development of MPPT algorithm and islanding detection algorithm. because output characteristics of solar cell are varied by irradiation and surface temperature of solar cell. Therefore, the assistant equipment which emulates the solar cell characteristics which can be controlled arbitrarily by researcher is require to the researchers for reliable experimental data. In this paper, the virtual implement of solar cell (VISC) system is proposed to solve these problems and to achieve reliable experimental result on photovoltaic system. VISC system emulates the solar cell output characteristics, and this system can substitute solar cell in laboratory experiment system. To realize the VISC, mathematical model of solar cell is studied for driving converter and the DC/DC converters are compared in viewpoint of tracking error using computer simulation. Output dynamic characteristic of PV array is varied by irradiation and PWM converter performance is studied using PSIM simulator.

• Journal of Biosystems Engineering
• /
• 제21권4호
• /
• pp.467-473
• /
• 1996

Ultrasonic energy was applied for atomizing rice-bran oil which is a highly viscous bio fuel. Six different nozzles, an injection simulator, and an ultrasonic generator system were designed and constructed for the experiment. An immersion liquid method was used for the measurement of injection droplet sizes. The characteristics of injection droplets was investigated with respect to the numbers of the droplets with diameters ranging from 5$\mu$m 50$\mu$m and to the Sauter mean diameter. The results showed that the ultrasonic energy was effective for the improvement of the atomization of the injection droplets for all the factors such as type of nozzles, nozzle opening pressures, and collection distances.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(2)
• /
• pp.687-691
• /
• 2003

In photovoltaic generation, PV module is used to generate the electricity, and this system has been in limelight as nonpolluting alternative energy source. But, as energy density is low and PV module cost is high, there is a disadvantage that initial investment cost go up. In this study, we studied the method of allowing a tracker, adequate to photovoltaic generation, for Increasing the generating. We determined the proper error angle in order to decrease the repeating number of tracking without a reduction of the generating by using our developed simulator. And, we presented the photovoltaic approach tracking control and achieved its experiment. Through the result of experiment, it is expected that the fault rate and the consumption of electric power in a tracker get reduced and its cost become cut down.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2007년도 동계학술발표대회 논문집
• /
• pp.76-81
• /
• 2007

The shopping center in underground passage increased for efficient space utilization in urban area. This study describes operation characteristics of all air type and hybrid type with local ventilation and fan coil unit fixed to ceiling. In order to compare energy saving, thermal environment and installation space, etc., integrated simulator with heat production and indoor distribution system is designed and constructed. Energy saving of the hybrid system is calculated as over 30% compared to conventional all air type. And also the results showed that humidity decreased about 6%, also indoor thermal distribution is improved as temperature variation of around $1^{\circ}C$.

• 한국시뮬레이션학회논문지
• /
• 제30권2호
• /
• pp.11-22
• /
• 2021

소노부이(sonobuoy)는 넓은 지역을 빠르게 탐색할 수 있다는 장점으로 인해 P-3 초계기를 이용한 전투체계에서 매우 중요한 음향센서로 사용되고 있다. 소노부이 시스템을 개발하고, 이를 실제 전투체계에 성공적으로 적용하기 위해서는 다양한 해상시험을 통해 소노부이 시스템의 성능을 검증하여야 한다. 그러나 실제 해상 시험은 많은 시간과 노력이 동반되기 때문에 다양한 해상시험 데이터를 확보하기는 쉽지 않다. 따라서 본 논문에서는 실제 해상시험을 수행하지 않고서도 소노부이 시스템의 성능을 검증할 수 있는 모의 신호합성기를 개발하였고, 소노부이 시스템의 효과도를 분석할 수 있는 시뮬레이터를 개발하였다. 실제 수중 소음원의 특성을 고려하여 표적신호를 합성하였으며, 음파전달특성 등 실제 해양환경과 유사한 조건을 고려하여 소노부이용 신호합성기를 개발하였다. 시뮬레이터 개발에서는 HMI(Human Machine Interface) 기법을 사용하여 운용자 편이성을 높였으며, 다양한 조건에서 소노부이 시스템의 성능을 검증할 수 있도록 설계하였다. 개발한 신호합성기 및 시뮬레이터는 P-3 초계기를 이용한 전투체계에서 최적의 소노부이 배치 등 작전 효과도를 분석하는데 유용한 도구로 사용 될 수 있을 것이다.

• 한국가스학회지
• /
• 제22권4호
• /
• pp.63-73
• /
• 2018

잉여전력 등을 활용한 에너지저장시스템 분야에 기술에 관심이 집중되고 혁신적인 기술진보가 이루어지고 있다. 다양한 에너지저장시스템 분야 중 가스액화 방식을 활용한 액화공기에너지저장 시스템은 상당히 성숙된 기술로 알려져 있고, 높은 단위 에너지 밀도와 설치에 따른 지형적 제약이 거의 없으며 수명이 긴 저장 시스템이라는 많은 장점에도 불구하고, 단일공정 (공기액화-재기화 사이클)의 낮은 사이클 효율로 인해 상업화에 한계가 있었다. 본 연구에서는 낮은 사이클 효율을 개선하고자 2종류의 냉매(R-600a 와 메탄올)을 이용한 냉매사이클을 공기 액화 공정에 활용하여 사이클 효율을 향상시키고, 공기 압축시 발생하는 압축열을 열매체유 순환 사이클에 이용하여 이를 액화공기 재기화 공정의 터빈 입구 온도를 높이는데 활용하여 전력생산량을 추가적으로 증가시킴으로써 사이클 효율을 획기적으로 향상시킬 수 있는 가능성을 Aspen HYSYS 공정 모사 프로그램을 활용하여 확인하였다.

• 한국정보시스템학회지:정보시스템연구
• /
• 제27권2호
• /
• pp.95-114
• /
• 2018

Purpose The recent concern over environmental problems such as greenhouse gas emission and fine dust contributes increasing interest in renewable energies. However the intrinsic characteristics of renewable energies, intermittent and stochastic generation, might cause serious problems to the stability and controllability of power grid. Therefore countermeasures such as virtual power plant (VPP) must be prepared in advance of the spread of uncontrollable distributed renewable energy resources to be one of major energy sources. Design/methodology/approach This study deals with the design concept of the VPP platform. we proposed as a technology solution for achieving the stability of power grid by guaranteeing a single power profile combining multiple distributed power sources with ICT. The core characteristics of VPP should be able to participate in the grid operation by responding to operation instructions from the system operator, KPX, as well as the wholesale electricity market. Findings Therefore this study includes energy storage device(ESS) as a controllable component as well as renewable energy resources such as photovoltaic and wind power generation. Based on this configuration, we discussed core element technologies of VPP and protype design of VPP solution platform according to system requirements. In the proposed solution platform, UX design for the integrated control center and brokerage system were included as well as ancillary service function to respond to KPX's operation instruction with utilizing the capability of ESS. In addition, a simulator was suggested to verify the VPP operations.